@article{21639,
  abstract     = {Traditional optical elements and conventional metasurfaces obey shift-invariance in the paraxial regime. For imaging systems obeying paraxial shift-invariance, a small shift in input angle causes a corresponding shift in the sensor image. Shift-invariance has deep implications for the design and functionality of optical devices, such as the necessity of free space between components (as in compound objectives made of several curved surfaces). We present a method for nanophotonic inverse design of compact imaging systems whose resolution is not constrained by paraxial shift-invariance. Our method is end-to-end, in that it integrates density-based full-Maxwell topology optimization with a fully iterative elastic-net reconstruction algorithm. By the design of nanophotonic structures that scatter light in a non-shift-invariant manner, our optimized nanophotonic imaging system overcomes the limitations of paraxial shift-invariance, achieving accurate, noise-robust image reconstruction beyond shift-invariant resolution.},
  author       = {Li, William F. and Arya, Gaurav and Roques-Carmes, Charles and Lin, Zin and Johnson, Steven G. and Soljačić, Marin},
  issn         = {1094-4087},
  journal      = {Optics Express},
  number       = {15},
  pages        = {24260--24272},
  publisher    = {Optica Publishing Group},
  title        = {{Transcending shift-invariance in the paraxial regime via end-to-end inverse design of freeform nanophotonics}},
  doi          = {10.1364/oe.492553},
  volume       = {31},
  year         = {2023},
}

@article{21638,
  abstract     = {We introduce end-to-end inverse design for multi-channel imaging, in which a nanophotonic frontend is optimized in conjunction with an image-processing backend to extract depth, spectral and polarization channels from a single monochrome image. Unlike diffractive optics, we show that subwavelength-scale “metasurface” designs can easily distinguish similar wavelength and polarization inputs. The proposed technique integrates a single-layer metasurface frontend with an efficient Tikhonov reconstruction backend, without any additional optics except a grayscale sensor. Our method yields multi-channel imaging by spontaneous demultiplexing: the metaoptics front-end separates different channels into distinct spatial domains whose locations on the sensor are optimally discovered by the inverse-design algorithm. We present large-area metasurface designs, compatible with standard lithography, for multi-spectral imaging, depth-spectral imaging, and “all-in-one” spectro-polarimetric-depth imaging with robust reconstruction performance (≲ 10% error with 1% detector noise). In contrast to neural networks, our framework is physically interpretable and does not require large training sets. It can be used to reconstruct arbitrary three-dimensional scenes with full multi-wavelength spectra and polarization textures.},
  author       = {Lin, Zin and Pestourie, Raphaël and Roques-Carmes, Charles and Li, Zhaoyi and Capasso, Federico and Soljačić, Marin and Johnson, Steven G.},
  issn         = {1094-4087},
  journal      = {Optics Express},
  number       = {16},
  pages        = {28358--28370},
  publisher    = {Optica Publishing Group},
  title        = {{End-to-end metasurface inverse design for single-shot multi-channel imaging}},
  doi          = {10.1364/oe.449985},
  volume       = {30},
  year         = {2022},
}

@article{9241,
  abstract     = {Volumetric light transport is a pervasive physical phenomenon, and therefore its accurate simulation is important for a broad array of disciplines. While suitable mathematical models for computing the transport are now available, obtaining the necessary material parameters needed to drive such simulations is a challenging task: direct measurements of these parameters from material samples are seldom possible. Building on the inverse scattering paradigm, we present a novel measurement approach which indirectly infers the transport parameters from extrinsic observations of multiple-scattered radiance. The novelty of the proposed approach lies in replacing structured illumination with a structured reflector bonded to the sample, and a robust fitting procedure that largely compensates for potential systematic errors in the calibration of the setup. We show the feasibility of our approach by validating simulations of complex 3D compositions of the measured materials against physical prints, using photo-polymer resins. As presented in this paper, our technique yields colorspace data suitable for accurate appearance reproduction in the area of 3D printing. Beyond that, and without fundamental changes to the basic measurement methodology, it could equally well be used to obtain spectral measurements that are useful for other application areas.},
  author       = {Elek, Oskar and Zhang, Ran and Sumin, Denis and Myszkowski, Karol and Bickel, Bernd and Wilkie, Alexander and Křivánek, Jaroslav and Weyrich, Tim},
  issn         = {1094-4087},
  journal      = {Optics Express},
  number       = {5},
  pages        = {7568--7588},
  publisher    = {Optica Publishing Group},
  title        = {{Robust and practical measurement of volume transport parameters in solid photo-polymer materials for 3D printing}},
  doi          = {10.1364/OE.406095},
  volume       = {29},
  year         = {2021},
}

@article{1788,
  abstract     = {We fabricate and characterize a microscale silicon opto-electromechanical system whose mechanical motion is coupled capacitively to an electrical circuit and optically via radiation pressure to a photonic crystal cavity. To achieve large electromechanical interaction strength, we implement an inverse shadow mask fabrication scheme which obtains capacitor gaps as small as 30 nm while maintaining a silicon surface quality necessary for minimizing optical loss. Using the sensitive optical read-out of the photonic crystal cavity, we characterize the linear and nonlinear capacitive coupling to the fundamental ωm=2π = 63 MHz in-plane flexural motion of the structure, showing that the large electromechanical coupling in such devices may be suitable for realizing efficient microwave-to-optical signal conversion.},
  author       = {Pitanti, Alessandro and Fink, Johannes M and Safavi Naeini, Amir and Hill, Jeff and Lei, Chan and Tredicucci, Alessandro and Painter, Oskar},
  issn         = {1094-4087},
  journal      = {Optics Express},
  number       = {3},
  pages        = {3196 -- 3208},
  publisher    = {Optica Publishing Group},
  title        = {{Strong opto-electro-mechanical coupling in a silicon photonic crystal cavity}},
  doi          = {10.1364/OE.23.003196},
  volume       = {23},
  year         = {2015},
}

@article{18436,
  author       = {Haim, Harel and Bronstein, Alexander and Marom, Emanuel},
  issn         = {1094-4087},
  journal      = {Optics Express},
  number       = {19},
  pages        = {24547 -- 24556},
  publisher    = {Optica Publishing Group},
  title        = {{Computational multi-focus imaging combining sparse model with color dependent phase mask}},
  doi          = {10.1364/oe.23.024547},
  volume       = {23},
  year         = {2015},
}

