@article{22370,
  abstract     = {We report a unified method for the synthesis of α-polyhalomethyl amines from alkenes and alkynes, enabled by readily available hemiaminal reagents. This operationally simple transformation allows for the introduction of not only well-established CF3 and CF2H groups, but also the synthetically (and medicinally) underexplored CF2Cl and CFClH motifs—thereby broadening access to previously inaccessible chemical space of halogenated amine scaffolds. The method displays broad substrate scope and functional-group tolerance while operating under mild conditions. Late-stage functionalization of drug-like derivatives of Oxaprozin, Erlotinib, and Ibuprofen (among others) is reported.},
  author       = {Hofmeister, Angela K. and Iannelli, Giulia and Angyal, Péter and Malandain, Augustin and Kaiser, Daniel and Maryasin, Boris and Kählig, Hanspeter and Barel, Matteo and Novarino, Gaia and Maulide, Nuno},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  publisher    = {Wiley},
  title        = {{Unified synthesis of unconventional α-polyhalogenated amines through hydroaminoalkylation}},
  doi          = {10.1002/anie.1233707},
  year         = {2026},
}

@article{20933,
  abstract     = {Photo-responsive systems based on azobenzenes usually require UV light for E→Z isomerization, limiting their applicability, especially in biomedical contexts. Disequilibration by sensitization of azobenzene under confinement (DESC) has recently emerged as a supramolecular strategy to bypass this limitation without the need to derivatize the azobenzene scaffold. Here, we expand DESC to water-soluble azopolymers obtained by RAFT polymerization and systematically investigate the interplay between the polymer structure and DESC efficiency. Using this approach, we achieved as much as 85% of the direct photoexcitation (UV) switching efficiency, while utilizing low-energy (yellow) light. These results establish general design principles for combining DESC with polymeric systems, opening new opportunities for the development of functional materials driven with low-energy light.},
  author       = {Meteling, Henning Jörn and Gemen, Julius and Häkkinen, Satu and Klajn, Rafal and Priimagi, Arri},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {7},
  publisher    = {Wiley},
  title        = {{Sensitized disequilibration of water-soluble azopolymers}},
  doi          = {10.1002/anie.202523447},
  volume       = {65},
  year         = {2026},
}

@article{22602,
  abstract     = {Contact electrification occurs ubiquitously in nature, but the identity of charge carriers in most situations remains uncertain, with electrons, ions, or nanoscopic material fragments as viable candidates. One material where the species transferred seems more certain is ionomers, i.e., polymers that contain mobile ions balanced by fixed counter‐charges. When ionomers touch a neutral surface, the latter becomes charged in the sign of the mobile ion, strongly suggesting ion transfer. However, the mechanism and governing factors of transfer remain poorly understood. Here, we demonstrate that binding affinity between mobile ion and ionomer controls charge transfer with ionomers. We use ionomers with fixed anions and cations and perform ion exchange to create samples with a series of transferrable ions. We observe a strong binding‐affinity dependence for the anionic ionomer, such that mobile cations with the highest affinity transfers the least charge. Weaker, yet clear dependence was measured for the cationic ionomer, which follows the hydration free energy of the mobile anion. Using inductively coupled plasma optical emission spectroscopy (ICP‐OES), we confirm transfer of the mobile ions to the counter sample's surface. Our results confirm the identify and mechanism of charge transfer with ionomeric materials, with potential implications for contact electrification more broadly.},
  author       = {Hoffman Jr, John R and Freunberger, Stefan Alexander and Waitukaitis, Scott R},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  publisher    = {Wiley},
  title        = {{Ion transfer during ionomer contact electrification: Binding affinity controls charging}},
  doi          = {10.1002/anie.5487708},
  year         = {2026},
}

@article{23004,
  abstract     = {Lattice strain engineering can regulate the electronic structure of electrocatalysts, but stabilizing distorted metastable phases remains challenging. Here, we report an N,N-dimethylformamide-assisted strategy for synthesizing metastable hexagonal close-packed (HCP) Ni nanoparticles with local lattice-spacing deviations reaching approximately 5.2%. Structural and spectroscopic analyses support a dilute interstitial-carbon-stabilized HCP Ni framework dominated by expanded metallic Ni─Ni coordination rather than ordered Ni3C. Carbon-associated perturbations inhibit structural relaxation and retain the distorted HCP framework. Operando x-ray absorption and infrared spectroscopies indicate the formation of a NiOOH-like working surface coupled to an HCP-derived subsurface framework, accompanied by potential-dependent changes in the interfacial hydrogen-bonding environment and urea-derived species. Calculations using idealized metallic models show that HCP lattice strain induces a Ni d-band upshift, anisotropic Ni─Ni bonding, and localized charge redistribution, modifying adsorption-energy trends for the urea oxidation reaction. The optimized HCP-Ni delivers an apparent steady-state Tafel slope of 26.95 mV dec−1, over twice the electrochemically active surface area-normalized activity of the face-centered cubic-containing controls, and approximately 98% apparent urea conversion after 22 h. It sustains current for over 120 h in three-electrode testing and enables over 400 h of urea-assisted zinc–air battery cycling. This work demonstrates dilute interstitial-carbon stabilization as a route to strained metastable electrocatalysts.},
  author       = {Xue, Qian and Yu, Jing and Dai, Juguo and Yang, Linlin and Bi, Xiaoyu and Ren, Yuchuan and Zhang, Jia and Qi, Xuede and Wang, Yudi and Xu, Ying and Arbiol, Jordi and He, Ren and Qi, Xueqiang and Cabot, Andreu},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  keywords     = {electrocatalysis, HCP nickel, interstitial carbon, kinetic trapping, lattice strain engineering, urea oxidation reaction},
  publisher    = {Wiley},
  title        = {{Dilute interstitial carbon stabilization of highly strained metastable HCP Nickel for enhanced electrocatalysis}},
  doi          = {10.1002/anie.2874510},
  year         = {2026},
}

@article{20960,
  abstract     = {A linker unit was designed and synthesized that can serve both as a hairpin turn in a DNA duplex and anchor point for an aromatic helical foldamer mimicking the shape and surface properties of B‐DNA. Methods were developed to synthesize natural/non‐natural chimeric molecules combining foldamer and DNA segments. The ability of the linker to position the foldamer helix and the duplex DNA so that their rims and grooves are in register, despite their completely different chemical nature, was demonstrated using single crystal X‐ray diffraction, circular dichroism and molecular models. Bio‐layer interferometry confirmed that artificial hairpin DNA duplexes keep their ability to bind to DNA binding proteins. The chimeric molecules may pave the way to competitive inhibitors of protein‐DNA interactions involving sequence‐selective DNA‐binding proteins.},
  author       = {Loos, Manuel and Xu, Felix and Mandal, Pradeep K and Chakrabortty, Tulika and Douat, Céline and Konrad, David B. and Cabbar, Melis and Singer, Johannes and Corvaglia, Valentina and Carell, Thomas and Huc, Ivan},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {31},
  publisher    = {Wiley},
  title        = {{Interfacing B‐DNA and DNA mimic foldamers}},
  doi          = {10.1002/anie.202505273},
  volume       = {64},
  year         = {2025},
}

@article{17105,
  abstract     = {The development of photoresponsive systems with non-invasive orthogonal control by distinct wavelengths of light is still in its infancy. In particular, the design of photochemically triggered-orthogonal systems integrated into solid materials that enable multiple dynamic control over their properties remains a longstanding challenge. Here, we report the orthogonal and reversible control of two types of photoswitches in an integrated solid porous framework, that is, visible-light responsive o-fluoroazobenzene and nitro-spiropyran motifs. The properties of the constructed material can be selectively controlled by different wavelengths of light thus generating four distinct states providing a basis for dynamic multifunctional materials. Solid-state NMR spectroscopy demonstrated the selective transformation of the azobenzene switch in the bulk, which in turn modulates N2 and CO2 adsorption.},
  author       = {Sheng, Jinyu and Perego, Jacopo and Bracco, Silvia and Cieciórski, Piotr and Danowski, Wojciech and Comotti, Angiolina and Feringa, Ben L.},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {23},
  publisher    = {Wiley},
  title        = {{Orthogonal photoswitching in a porous organic framework}},
  doi          = {10.1002/anie.202404878},
  volume       = {63},
  year         = {2024},
}

@article{17052,
  abstract     = {Production of thermoelectric materials from solution-processed particles involves the synthesis of particles, their purification and densification into pelletized material. Chemical changes that occur during each one of these steps render them performance determining. Particularly the purification steps, bypassed in conventional solid-state synthesis, are the cause for large discrepancies among similar solution-processed materials. In present work, the investigation focuses on a water-based surfactant free solution synthesis of SnSe, a highly relevant thermoelectric material. We show and rationalize that the number of leaching steps, purification solvent, annealing, and annealing atmosphere have significant influence on the Sn : Se ratio and impurity content in the powder. Such compositional changes that are undetectable by conventional characterization techniques lead to distinct consolidated materials with different types and concentration of defects. Additionally, the profound effect on their transport properties is demonstrated. We emphasize that understanding the chemistry and identifying key chemical species and their role throughout the process is paramount for optimizing material performance. Furthermore, we aim to demonstrate the necessity of comprehensive reporting of these steps as a standard practice to ensure material reproducibility.},
  author       = {Fiedler, Christine and Calcabrini, Mariano and Liu, Yu and Ibáñez, Maria},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {25},
  publisher    = {Wiley},
  title        = {{Unveiling crucial chemical processing parameters influencing the performance of solution-processed inorganic thermoelectric materials}},
  doi          = {10.1002/anie.202402628},
  volume       = {63},
  year         = {2024},
}

@article{14687,
  abstract     = {The short history of research on Li-O2 batteries has seen a remarkable number of mechanistic U-turns over the years. From the initial use of carbonate electrolytes, that were then found to be entirely unsuitable, to the belief that (su)peroxide was solely responsible for degradation, before the more reactive singlet oxygen was found to form, to the hypothesis that capacity depends on a competing surface/solution mechanism before a practically exclusive solution mechanism was identified. Herein, we argue for an ever-fresh look at the reported data without bias towards supposedly established explanations. We explain how the latest findings on rate and capacity limits, as well as the origin of side reactions, are connected via the disproportionation (DISP) step in the (dis)charge mechanism. Therefrom, directions emerge for the design of electrolytes and mediators on how to suppress side reactions and to enable high rate and high reversible capacity.},
  author       = {Jethwa, Rajesh B and Mondal, Soumyadip and Pant, Bhargavi and Freunberger, Stefan Alexander},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  keywords     = {General Chemistry, Catalysis},
  number       = {28},
  publisher    = {Wiley},
  title        = {{To DISP or not? The far‐reaching reaction mechanisms underpinning Lithium‐air batteries}},
  doi          = {10.1002/anie.202316476},
  volume       = {63},
  year         = {2024},
}

@article{12922,
  abstract     = {The influence of structural modifications on the catalytic activity of carbon materials is poorly understood. A collection of carbonaceous materials with different pore networks and high nitrogen content was characterized and used to catalyze four reactions to deduce structure–activity relationships. The CO2 cycloaddition and Knoevenagel reaction depend on Lewis basic sites (electron-rich nitrogen species). The absence of large conjugated carbon domains resulting from the introduction of large amounts of nitrogen in the carbon network is responsible for poor redox activity, as observed through the catalytic reduction of nitrobenzene with hydrazine and the catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine using hydroperoxide. The material with the highest activity towards Lewis acid catalysis (in the hydrolysis of (dimethoxymethyl)benzene to benzaldehyde) is the most effective for small molecule activation and presents the highest concentration of electron-poor nitrogen species.},
  author       = {Lepre, Enrico and Rat, Sylvain and Cavedon, Cristian and Seeberger, Peter H. and Pieber, Bartholomäus and Antonietti, Markus and López‐Salas, Nieves},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  keywords     = {General Chemistry, Catalysis},
  number       = {2},
  publisher    = {Wiley},
  title        = {{Catalytic properties of high nitrogen content carbonaceous materials}},
  doi          = {10.1002/anie.202211663},
  volume       = {62},
  year         = {2023},
}

@article{20966,
  abstract     = {We prepared a series of water‐soluble aromatic oligoamide sequences all composed of a segment prone to form a single helix and a segment prone to dimerize into a double helix. These sequences exclusively assemble as antiparallel duplexes. The modification of the duplex inner rim by varying the nature of the substituents borne by the aromatic monomers allowed us to identify sequences that can hybridize by combining two chemically different strands, with high affinity and complete selectivity in water. X‐ray crystallography confirmed the expected antiparallel configuration of the duplexes whereas NMR spectroscopy and mass spectrometry allowed us to assess precisely the extent of the hybridization. The hybridization kinetics of the aromatic strands was shown to depend on both the nature of the substituents responsible for strand complementarity and the length of the aromatic strand. These results highlight the great potential of aromatic hetero‐duplex as a tool to construct non‐symmetrical dynamic supramolecular assemblies.},
  author       = {Koehler, Victor and Bruschera, Gabrielle and Merlet, Eric and Mandal, Pradeep K and Morvan, Estelle and Rosu, Frédéric and Douat, Céline and Fischer, Lucile and Huc, Ivan and Ferrand, Yann},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {48},
  publisher    = {Wiley},
  title        = {{High‐affinity hybridization of complementary aromatic oligoamide strands in water}},
  doi          = {10.1002/anie.202311639},
  volume       = {62},
  year         = {2023},
}

@article{21813,
  abstract     = {Aligned liquid crystal polymers are materials of interest for electronic, optic, biological and soft robotic applications. The manufacturing and processing of these materials have been widely explored with mechanical alignment establishing itself as a preferred method due to its ease of use and widespread applicability. However, the fundamental chemistry behind the required two‐step polymerization for mechanical alignment has limitations in both fabrication and substrate compatibility. In this work we introduce a new protection‐deprotection approach utilizing a two‐stage Diels–Alder cyclopentadiene‐maleimide step‐growth polymerization to enable mild yet efficient, fast, controlled, reproducible and user‐friendly polymerizations, broadening the scope of liquid crystal systems. Thorough characterization of the films by DSC, DMA, POM and WAXD show the successful synthesis of a uniaxially aligned liquid crystal network with thermomechanical actuation abilities.},
  author       = {Guillen Campos, Jesus and Stricker, Friedrich J and Clark, Kyle D. and Park, Minwook and Bailey, Sophia J. and Kuenstler, Alexa S. and Hayward, Ryan C. and Read de Alaniz, Javier},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {1},
  publisher    = {Wiley},
  title        = {{Controlled Diels–Alder “Click” strategy to access mechanically aligned main‐chain liquid crystal networks}},
  doi          = {10.1002/anie.202214339},
  volume       = {62},
  year         = {2023},
}

@misc{14861,
  abstract     = {Cover Page},
  author       = {Becker, Lea Marie and Berbon, Mélanie and Vallet, Alicia and Grelard, Axelle and Morvan, Estelle and Bardiaux, Benjamin and Lichtenecker, Roman and Ernst, Matthias and Loquet, Antoine and Schanda, Paul},
  booktitle    = {Angewandte Chemie International Edition},
  issn         = {1521-3773},
  keywords     = {General Chemistry, Catalysis},
  number       = {19},
  publisher    = {Wiley},
  title        = {{Cover Picture: The rigid core and flexible surface of amyloid fibrils probed by Magic‐Angle‐Spinning NMR spectroscopy of aromatic residues}},
  doi          = {10.1002/anie.202304138},
  volume       = {62},
  year         = {2023},
}

@article{12675,
  abstract     = {Aromatic side chains are important reporters of the plasticity of proteins, and often form important contacts in protein--protein interactions. By studying a pair of structurally homologous cross-β amyloid fibrils, HET-s and HELLF, with a specific isotope-labeling approach and magic-angle-spinning (MAS) NMR, we have characterized the dynamic behavior of Phe and Tyr aromatic rings to show that the hydrophobic amyloid core is rigid, without any sign of "breathing motions" over hundreds of milliseconds at least. Aromatic residues exposed at the fibril surface have a rigid ring axis but undergo ring flips, on a variety of time scales from ns to µs. Our approach provides direct insight into hydrophobic-core motions, enabling a better evaluation of the conformational heterogeneity generated from a NMR structural ensemble of such amyloid cross-β architecture.},
  author       = {Becker, Lea Marie and Berbon, Mélanie and Vallet, Alicia and Grelard, Axelle and Morvan, Estelle and Bardiaux, Benjamin and Lichtenecker, Roman and Ernst, Matthias and Loquet, Antoine and Schanda, Paul},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  keywords     = {General Chemistry, Catalysis},
  number       = {19},
  publisher    = {Wiley},
  title        = {{The rigid core and flexible surface of amyloid fibrils probed by Magic‐Angle Spinning NMR of aromatic residues}},
  doi          = {10.1002/anie.202219314},
  volume       = {62},
  year         = {2023},
}

@article{11955,
  abstract     = {Covalent organic frameworks (COFs) are structurally tuneable, porous and crystalline polymers constructed through the covalent attachment of small organic building blocks as elementary units. Using the myriad of such building blocks, a broad spectrum of functionalities has been applied for COF syntheses for broad applications, including heterogeneous catalysis. Herein, we report the synthesis of a new family of porous and crystalline COFs using a novel acridine linker and benzene-1,3,5-tricarbaldehyde derivatives bearing a variable number of hydroxy groups. With the broad absorption in the visible light region, the COFs were applied as photocatalysts in metallaphotocatalytic C−N cross-coupling. The fully β-ketoenamine linked COF showed the highest activity, due to the increased charge separation upon irradiation. The COF showed good to excellent yields for several aryl bromides, good recyclability and even catalyzed the organic transformation in presence of green light as energy source.},
  author       = {Traxler, Michael and Gisbertz, Sebastian and Pachfule, Pradip and Schmidt, Johannes and Roeser, Jérôme and Reischauer, Susanne and Rabeah, Jabor and Pieber, Bartholomäus and Thomas, Arne},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {21},
  publisher    = {Wiley},
  title        = {{Acridine‐functionalized covalent organic frameworks (COFs) as photocatalysts for metallaphotocatalytic C−N cross‐coupling}},
  doi          = {10.1002/anie.202117738},
  volume       = {61},
  year         = {2022},
}

@article{12228,
  abstract     = {The question of how RNA, as the principal carrier of genetic information evolved is fundamentally important for our understanding of the origin of life. The RNA molecule is far too complex to have formed in one evolutionary step, suggesting that ancestral proto-RNAs (first ancestor of RNA) may have existed, which evolved over time into the RNA of today. Here we show that isoxazole nucleosides, which are quickly formed from hydroxylamine, cyanoacetylene, urea and ribose, are plausible precursors for RNA. The isoxazole nucleoside can rearrange within an RNA-strand to give cytidine, which leads to an increase of pairing stability. If the proto-RNA contains a canonical seed-nucleoside with defined stereochemistry, the seed-nucleoside can control the configuration of the anomeric center that forms during the in-RNA transformation. The results demonstrate that RNA could have emerged from evolutionarily primitive precursor isoxazole ribosides after strand formation.},
  author       = {Xu, Felix and Crisp, Antony and Schinkel, Thea and Dubini, Romeo C. A. and Hübner, Sarah and Becker, Sidney and Schelter, Florian and Rovo, Petra and Carell, Thomas},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  keywords     = {General Chemistry, Catalysis},
  number       = {45},
  publisher    = {Wiley},
  title        = {{Isoxazole nucleosides as building blocks for a plausible proto‐RNA}},
  doi          = {10.1002/anie.202211945},
  volume       = {61},
  year         = {2022},
}

@article{12924,
  abstract     = {We demonstrate that several visible-light-mediated carbon−heteroatom cross-coupling reactions can be carried out using a photoactive NiII precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl2). The activation of this precatalyst towards cross-coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light-responsive nickel complexes that undergo metal-to-ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross-coupling reactions. The heterogeneous catalyst shows stable performance in a packed-bed flow reactor during a week of continuous operation.},
  author       = {Cavedon, Cristian and Gisbertz, Sebastian and Reischauer, Susanne and Vogl, Sarah and Sperlich, Eric and Burke, John H. and Wallick, Rachel F. and Schrottke, Stefanie and Hsu, Wei‐Hsin and Anghileri, Lucia and Pfeifer, Yannik and Richter, Noah and Teutloff, Christian and Müller‐Werkmeister, Henrike and Cambié, Dario and Seeberger, Peter H. and Vura‐Weis, Josh and van der Veen, Renske M. and Thomas, Arne and Pieber, Bartholomäus},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  keywords     = {General Chemistry, Catalysis},
  number       = {46},
  publisher    = {Wiley},
  title        = {{Intraligand charge transfer enables visible‐light‐mediated Nickel‐catalyzed cross-coupling reactions}},
  doi          = {10.1002/anie.202211433},
  volume       = {61},
  year         = {2022},
}

@article{21080,
  abstract     = {Tight binding was observed between the C‐terminal cross section of aromatic oligoamide helices in aqueous solution, leading to the formation of discrete head‐to‐head dimers in slow exchange on the NMR timescale with the corresponding monomers. The nature and structure of the dimers was evidenced by 2D NOESY and DOSY spectroscopy, mass spectrometry and X‐ray crystallography. The binding interface involves a large hydrophobic aromatic surface and hydrogen bonding. Dimerization requires that helices have the same handedness and the presence of a C‐terminal carboxy function. The protonation state of the carboxy group plays a crucial role, resulting in pH dependence of the association. Dimerization is also influenced by neighboring side chains and can be programmed to selectively produce heteromeric aggregates.},
  author       = {Bindl, Daniel and Mandal, Pradeep K and Allmendinger, Lars and Huc, Ivan},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {11},
  publisher    = {Wiley},
  title        = {{Discrete stacked dimers of aromatic oligoamide helices}},
  doi          = {10.1002/anie.202116509},
  volume       = {61},
  year         = {2022},
}

@article{11705,
  abstract     = {The broad implementation of thermoelectricity requires high-performance and low-cost materials. One possibility is employing surfactant-free solution synthesis to produce nanopowders. We propose the strategy of functionalizing “naked” particles’ surface by inorganic molecules to control the nanostructure and, consequently, thermoelectric performance. In particular, we use bismuth thiolates to functionalize surfactant-free SnTe particles’ surfaces. Upon thermal processing, bismuth thiolates decomposition renders SnTe-Bi2S3 nanocomposites with synergistic functions: 1) carrier concentration optimization by Bi doping; 2) Seebeck coefficient enhancement and bipolar effect suppression by energy filtering; and 3) lattice thermal conductivity reduction by small grain domains, grain boundaries and nanostructuration. Overall, the SnTe-Bi2S3 nanocomposites exhibit peak z T up to 1.3 at 873 K and an average z T of ≈0.6 at 300–873 K, which is among the highest reported for solution-processed SnTe.},
  author       = {Chang, Cheng and Liu, Yu and Lee, Seungho and Spadaro, Maria and Koskela, Kristopher M. and Kleinhanns, Tobias and Costanzo, Tommaso and Arbiol, Jordi and Brutchey, Richard L. and Ibáñez, Maria},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {35},
  publisher    = {Wiley},
  title        = {{Surface functionalization of surfactant-free particles: A strategy to tailor the properties of nanocomposites for enhanced thermoelectric performance}},
  doi          = {10.1002/anie.202207002},
  volume       = {61},
  year         = {2022},
}

@article{11451,
  abstract     = {The precursor conversion chemistry and surface chemistry of Cu3N and Cu3PdN nanocrystals are unknown or contested. Here, we first obtain phase-pure, colloidally stable nanocubes. Second, we elucidate the pathway by which copper(II) nitrate and oleylamine form Cu3N. We find that oleylamine is both a reductant and a nitrogen source. Oleylamine is oxidized by nitrate to a primary aldimine, which reacts further with excess oleylamine to a secondary aldimine, eliminating ammonia. Ammonia reacts with CuI to form Cu3N. Third, we investigated the surface chemistry and find a mixed ligand shell of aliphatic amines and carboxylates (formed in situ). While the carboxylates appear tightly bound, the amines are easily desorbed from the surface. Finally, we show that doping with palladium decreases the band gap and the material becomes semi-metallic. These results bring insight into the chemistry of metal nitrides and might help the development of other metal nitride nanocrystals.},
  author       = {Parvizian, Mahsa and Duràn Balsa, Alejandra and Pokratath, Rohan and Kalha, Curran and Lee, Seungho and Van Den Eynden, Dietger and Ibáñez, Maria and Regoutz, Anna and De Roo, Jonathan},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {31},
  publisher    = {Wiley},
  title        = {{The chemistry of Cu₃N and Cu₃PdN nanocrystals}},
  doi          = {10.1002/anie.202207013},
  volume       = {61},
  year         = {2022},
}

@article{11956,
  abstract     = {Controlling the selectivity of a chemical reaction with external stimuli is common in thermal processes, but rare in visible-light photocatalysis. Here we show that the redox potential of a carbon nitride photocatalyst (CN-OA-m) can be tuned by changing the irradiation wavelength to generate electron holes with different oxidation potentials. This tuning was the key to realizing photo-chemo-enzymatic cascades that give either the (S)- or the (R)-enantiomer of phenylethanol. In combination with an unspecific peroxygenase from Agrocybe aegerita, green light irradiation of CN-OA-m led to the enantioselective hydroxylation of ethylbenzene to (R)-1-phenylethanol (99 % ee). In contrast, blue light irradiation triggered the photocatalytic oxidation of ethylbenzene to acetophenone, which in turn was enantioselectively reduced with an alcohol dehydrogenase from Rhodococcus ruber to form (S)-1-phenylethanol (93 % ee).},
  author       = {Schmermund, Luca and Reischauer, Susanne and Bierbaumer, Sarah and Winkler, Christoph K. and Diaz‐Rodriguez, Alba and Edwards, Lee J. and Kara, Selin and Mielke, Tamara and Cartwright, Jared and Grogan, Gideon and Pieber, Bartholomäus and Kroutil, Wolfgang},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {13},
  pages        = {6965--6969},
  publisher    = {Wiley},
  title        = {{Chromoselective photocatalysis enables stereocomplementary biocatalytic pathways}},
  doi          = {10.1002/anie.202100164},
  volume       = {60},
  year         = {2021},
}

