@article{14793,
  abstract     = {Superconductor/semiconductor hybrid devices have attracted increasing interest in the past years. Superconducting electronics aims to complement semiconductor technology, while hybrid architectures are at the forefront of new ideas such as topological superconductivity and protected qubits. In this work, we engineer the induced superconductivity in two-dimensional germanium hole gas by varying the distance between the quantum well and the aluminum. We demonstrate a hard superconducting gap and realize an electrically and flux tunable superconducting diode using a superconducting quantum interference device (SQUID). This allows to tune the current phase relation (CPR), to a regime where single Cooper pair tunneling is suppressed, creating a sin(2y) CPR. Shapiro experiments complement this interpretation and the microwave drive allows to create a diode with ≈ 100% efficiency. The reported results open up the path towards integration of spin qubit devices, microwave resonators and (protected) superconducting qubits on  the same silicon technology compatible platform.},
  author       = {Valentini, Marco and Sagi, Oliver and Baghumyan, Levon and de Gijsel, Thijs and Jung, Jason and Calcaterra, Stefano and Ballabio, Andrea and Aguilera Servin, Juan L and Aggarwal, Kushagra and Janik, Marian and Adletzberger, Thomas and Seoane Souto, Rubén and Leijnse, Martin and Danon, Jeroen and Schrade, Constantin and Bakkers, Erik and Chrastina, Daniel and Isella, Giovanni and Katsaros, Georgios},
  issn         = {2041-1723},
  journal      = {Nature Communications},
  publisher    = {Springer Nature},
  title        = {{Parity-conserving Cooper-pair transport and ideal superconducting diode in planar germanium}},
  doi          = {10.1038/s41467-023-44114-0},
  volume       = {15},
  year         = {2024},
}

@article{18902,
  author       = {Zagorski, Marcin and Brandenberg, Nathalie and Lutolf, Matthias and Tkačik, Gašper and Bollenbach, Mark Tobias and Briscoe, James and Kicheva, Anna},
  issn         = {2041-1723},
  journal      = {Nature Communications},
  publisher    = {Springer Nature},
  title        = {{Assessing the precision of morphogen gradients in neural tube development}},
  doi          = {10.1038/s41467-024-45148-8},
  volume       = {15},
  year         = {2024},
}

@article{15320,
  abstract     = {Josephson diodes are superconducting elements that show an asymmetry in the critical current depending on the direction of the current. Here, we theoretically explore how an alternating current bias can tune the response of such a diode. We show that for slow driving there is always a regime where the system can only carry zero-voltage dc current in one direction, thus effectively behaving as an ideal Josephson diode. Under fast driving, the diode efficiency is also tunable, although the ideal regime cannot be reached in this case. We also investigate the residual dissipation due to the time-dependent current bias and show that it remains small. All our conclusions are solely based on the critical current asymmetry of the junction, and are thus compatible with any Josephson diode.},
  author       = {Seoane Souto, Rubén and Leijnse, Martin and Schrade, Constantin and Valentini, Marco and Katsaros, Georgios and Danon, Jeroen},
  issn         = {2643-1564},
  journal      = {Physical Review Research},
  number       = {2},
  publisher    = {American Physical Society},
  title        = {{Tuning the Josephson diode response with an ac current}},
  doi          = {10.1103/PhysRevResearch.6.L022002},
  volume       = {6},
  year         = {2024},
}

@article{17389,
  abstract     = {The potential of Si and SiGe-based devices for the scaling of quantum circuits is tainted by device variability. Each device needs to be tuned to operation conditions and each device realisation requires a different tuning protocol. We demonstrate that it is possible to automate the tuning of a 4-gate Si FinFET, a 5-gate GeSi nanowire and a 7-gate Ge/SiGe heterostructure double quantum dot device from scratch with the same algorithm. We achieve tuning times of 30, 10, and 92 min, respectively. The algorithm also provides insight into the parameter space landscape for each of these devices, allowing for the characterization of the regions where double quantum dot regimes are found. These results show that overarching solutions for the tuning of quantum devices are enabled by machine learning.},
  author       = {Severin, B. and Lennon, D. T. and Camenzind, L. C. and Vigneau, F. and Fedele, F. and Jirovec, Daniel and Ballabio, A. and Chrastina, D. and Isella, G. and de Kruijf, M. and Carballido, M. J. and Svab, S. and Kuhlmann, A. V. and Geyer, S. and Froning, F. N. M. and Moon, H. and Osborne, M. A. and Sejdinovic, D. and Katsaros, Georgios and Zumbühl, D. M. and Briggs, G. A. D. and Ares, N.},
  issn         = {2045-2322},
  journal      = {Scientific Reports},
  publisher    = {Springer Nature},
  title        = {{Cross-architecture tuning of silicon and SiGe-based quantum devices using machine learning}},
  doi          = {10.1038/s41598-024-67787-z},
  volume       = {14},
  year         = {2024},
}

@article{18602,
  abstract     = {Semiconductor quantum dots (QDs) in planar germanium (Ge) heterostructures have emerged as front-runners for future hole-based quantum processors. Here, we present strong coupling between a hole charge qubit, defined in a double quantum dot (DQD) in planar Ge, and microwave photons in a high-impedance (Zr = 1.3 kΩ) resonator based on an array of superconducting quantum interference devices (SQUIDs). Our investigation reveals vacuum-Rabi splittings with coupling strengths up to g0/2π = 260 MHz, and a cooperativity of C ~ 100, dependent on DQD tuning. Furthermore, utilizing the frequency tunability of our resonator, we explore the quenched energy splitting associated with strong Coulomb correlation effects in Ge QDs. The observed enhanced coherence of the strongly correlated excited state signals the presence of distinct symmetries within related spin functions, serving as a precursor to the strong coupling between photons and spin-charge hybrid qubits in planar Ge. This work paves the way towards coherent quantum connections between remote hole qubits in planar Ge, required to scale up hole-based quantum processors.},
  author       = {De Palma, Franco and Oppliger, Fabian and Jang, Wonjin and Bosco, Stefano and Janik, Marian and Calcaterra, Stefano and Katsaros, Georgios and Isella, Giovanni and Loss, Daniel and Scarlino, Pasquale},
  issn         = {2041-1723},
  journal      = {Nature Communications},
  publisher    = {Springer Nature},
  title        = {{Strong hole-photon coupling in planar Ge for probing charge degree and strongly correlated states}},
  doi          = {10.1038/s41467-024-54520-7},
  volume       = {15},
  year         = {2024},
}

@article{18653,
  abstract     = {Charge sensing is a sensitive technique for probing quantum devices, of particular importance for spin-qubit readout. To achieve good readout sensitivities, the proximity of the charge sensor to the device to be measured is a necessity. However, this proximity also means that the operation of the device affects, in turn, the sensor tuning and ultimately the readout sensitivity. We present an approach for compensating for this crosstalk effect allowing for the gate voltages of the measured device to be swept in a 1-V × 1-V window while maintaining a sensor configuration chosen by a Bayesian optimizer. Our algorithm will hopefully be a major contribution to the suite of fully automated solutions required for the operation of large quantum device architectures.},
  author       = {Hickie, Joseph and Van Straaten, Barnaby and Fedele, Federico and Jirovec, Daniel and Ballabio, Andrea and Chrastina, Daniel and Isella, Giovanni and Katsaros, Georgios and Ares, Natalia},
  issn         = {2331-7019},
  journal      = {Physical Review Applied},
  number       = {6},
  publisher    = {American Physical Society},
  title        = {{Automated long-range compensation of an rf quantum dot sensor}},
  doi          = {10.1103/PhysRevApplied.22.064026},
  volume       = {22},
  year         = {2024},
}

@misc{23037,
  abstract     = {The data for all figures in the main text can be found in csv files in ASCII format in the corresponing folders. For Figures 4-6, the panels are numbered from top to bottom.},
  author       = {De Palma, Franco and Oppliger, Fabian and Jang, Wonjin and Bosco, Stefano and Janík, Marián and Calcaterra, Stefano and Katsaros, Georgios and Isella, Giovanni and Loss, Daniel and Scarlino, Pasquale},
  publisher    = {Zenodo},
  title        = {{Online data of "Strong hole-photon coupling in planar Ge for probing charge degree and strongly correlated states"}},
  doi          = {10.5281/zenodo.13935166},
  year         = {2024},
}

@article{15018,
  abstract     = {The epitaxial growth of a strained Ge layer, which is a promising candidate for the channel material of a hole spin qubit, has been demonstrated on 300 mm Si wafers using commercially available Si0.3Ge0.7 strain relaxed buffer (SRB) layers. The assessment of the layer and the interface qualities for a buried strained Ge layer embedded in Si0.3Ge0.7 layers is reported. The XRD reciprocal space mapping confirmed that the reduction of the growth temperature enables the 2-dimensional growth of the Ge layer fully strained with respect to the Si0.3Ge0.7. Nevertheless, dislocations at the top and/or bottom interface of the Ge layer were observed by means of electron channeling contrast imaging, suggesting the importance of the careful dislocation assessment. The interface abruptness does not depend on the selection of the precursor gases, but it is strongly influenced by the growth temperature which affects the coverage of the surface H-passivation. The mobility of 2.7 × 105 cm2/Vs is promising, while the low percolation density of 3 × 1010 /cm2 measured with a Hall-bar device at 7 K illustrates the high quality of the heterostructure thanks to the high Si0.3Ge0.7 SRB quality.},
  author       = {Shimura, Yosuke and Godfrin, Clement and Hikavyy, Andriy and Li, Roy and Aguilera Servin, Juan L and Katsaros, Georgios and Favia, Paola and Han, Han and Wan, Danny and de Greve, Kristiaan and Loo, Roger},
  issn         = {1369-8001},
  journal      = {Materials Science in Semiconductor Processing},
  keywords     = {Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics, General Materials Science},
  number       = {5},
  publisher    = {Elsevier},
  title        = {{Compressively strained epitaxial Ge layers for quantum computing applications}},
  doi          = {10.1016/j.mssp.2024.108231},
  volume       = {174},
  year         = {2024},
}

@unpublished{17136,
  abstract     = {This paper focuses on Majority Dynamics in sparse graphs, in particular, as a
tool to study internal cuts. It is known that, in Majority Dynamics on a finite
graph, each vertex eventually either comes to a fixed state, or oscillates with
period two. The empirical evidence acquired by simulations suggests that for
random odd-regular graphs, approximately half of the vertices end up
oscillating with high probability. We notice a local symmetry between
oscillating and non-oscillating vertices, that potentially can explain why the
fraction of the oscillating vertices is concentrated around $\frac{1}{2}$. In
our simulations, we observe that the parts of random odd-regular graph under
Majority Dynamics with high probability do not contain $\lceil \frac{d}{2}
\rceil$-cores at any timestep, and thus, one cannot use Majority Dynamics to
prove that internal cuts exist in odd-regular graphs almost surely. However, we
suggest a modification of Majority Dynamics, that yields parts with desired
cores with high probability.},
  author       = {Arkhipov, Pavel},
  booktitle    = {arXiv},
  title        = {{Majority dynamics and internal partitions of random regular graphs: Experimental results}},
  doi          = {10.48550/arXiv.2406.07026},
  year         = {2024},
}

@article{18174,
  abstract     = {We investigate the phase ordering (pattern formation) of systems of two-dimensional core–shell particles using Monte Carlo (MC) computer simulations and classical density functional theory (DFT). The particles interact via a pair potential having a hard core and a repulsive square shoulder. Our simulations show that on cooling, the liquid state structure becomes increasingly characterized by long wavelength density modulations and on further cooling forms a variety of other phases, including clustered, striped, and other patterned phases. In DFT, the hard core part of the potential is treated using either fundamental measure theory or a simple local density approximation, whereas the soft shoulder is treated using the random phase approximation. The different DFTs are benchmarked using large-scale grand-canonical-MC and Gibbs-ensemble-MC simulations, demonstrating their predictive capabilities and shortcomings. We find that having the liquid state static structure factor S(k) for wavenumber k is sufficient to identify the Fourier modes governing both the liquid and solid phases. This allows us to identify from easier-to-obtain liquid state data the wavenumbers relevant to the periodic phases and to predict roughly where in the phase diagram these patterned phases arise.},
  author       = {Wassermair, Michael and Kahl, Gerhard and Roth, Roland and Archer, Andrew J.},
  issn         = {1089-7690},
  journal      = {The Journal of chemical physics},
  number       = {12},
  publisher    = {AIP Publishing},
  title        = {{Fingerprints of ordered self-assembled structures in the liquid phase of a hard-core, square-shoulder system}},
  doi          = {10.1063/5.0226954},
  volume       = {161},
  year         = {2024},
}

@article{14653,
  abstract     = {Mass spectrometry imaging (MSI) is a powerful analytical technique for the two-dimensional (2D) localization of chemicals on surfaces. Conventional MSI experiments require to predefine the surface of interest based on photographic or microscopic images. Typically, these boundaries can no longer be changed or adjusted once the experiment has been started. In terms of a more interactive approach we recently developed a pen-like ionization interface which is directly connected to the mass spectrometer. The device allows the user to ionize chemicals by desorption electrospray ionization (DESI) and to freely move the interface over a surface of interest. A mini camera, which is mounted on the tip of the pen, magnifies the desorption area and enables a simple positioning of the pen. The combination of optical data from the camera module and chemical data obtained by mass analysis facilitates a novel type of imaging experiment: interactive mass spectrometry imaging (IMSI). For this application, we present a novel approach for a robust, optical flow-based motion detection. While the live video stream from the camera is used to track the pen's motion across the surface a post-acquisition algorithm correlates the coordinates of the pen trajectory with respective mass spectra obtained from a simultaneous mass spectrometric data acquisition. This algorithm is no longer dependent on a single, manually applied optical marker on the sample surface, which has to be visible on all video frames throughout the analysis. The advanced DESI-IMSI method was successfully tested on inkjet-printed letters as well as mouse brain tissue samples. Validation of the results was done by comparing DESI-IMSI with standard DESI-MSI data.},
  author       = {Kluibenschedl, Florian and Ploner, Anna and Meisenbichler, Christina and Konrat, Robert and Müller, Thomas},
  issn         = {1387-3806},
  journal      = {International Journal of Mass Spectrometry},
  publisher    = {Elsevier},
  title        = {{Advanced motion tracking for interactive mass spectrometry imaging (IMSI)}},
  doi          = {10.1016/j.ijms.2023.117168},
  volume       = {495},
  year         = {2024},
}

@article{15407,
  abstract     = {We propose and implement a family of quantum-informed recursive optimization (QIRO) algorithms for combinatorial optimization problems. Our approach leverages quantum resources to obtain information that is used in problem-specific classical reduction steps that recursively simplify the problem. These reduction steps address the limitations of the quantum component (e.g., locality) and ensure solution feasibility in constrained optimization problems. Additionally, we use backtracking techniques to further improve the performance of the algorithm without increasing the requirements on the quantum hardware. We showcase the capabilities of our approach by informing QIRO with correlations from classical simulations of shallow circuits of the quantum approximate optimization algorithm, solving instances of maximum independent set and maximum satisfiability problems with hundreds of variables. We also demonstrate how QIRO can be deployed on a neutral atom quantum processor to find large independent sets of graphs. In summary, our scheme achieves results comparable to classical heuristics even with relatively weak quantum resources. Furthermore, enhancing the quality of these quantum resources improves the performance of the algorithms. Notably, the modular nature of QIRO offers various avenues for modifications, positioning our work as a template for a broader class of hybrid quantum-classical algorithms for combinatorial optimization.},
  author       = {Finžgar, Jernej Rudi and Kerschbaumer, Aron and Schuetz, Martin J.A. and Mendl, Christian B. and Katzgraber, Helmut G.},
  issn         = {2691-3399},
  journal      = {PRX Quantum},
  number       = {2},
  publisher    = {American Physical Society},
  title        = {{Quantum-informed recursive optimization algorithms}},
  doi          = {10.1103/PRXQuantum.5.020327},
  volume       = {5},
  year         = {2024},
}

@article{15360,
  abstract     = {We investigate superradiant enhancements in the refrigeration performance of a set of N three-level systems that are collectively coupled to a hot and a cold thermal reservoir and are additionally subject to collective periodic (circular) driving. Assuming the system-reservoir coupling to be weak, we explore the regime of stronger periodic driving strengths by comparing collective weak driving, Floquet-Lindblad, and Floquet-Redfield master equations. We identify regimes where the power injected by the periodic driving is used to pump heat from the cold to the hot reservoir and derive analytic sufficient conditions for them based on a cycle analysis of the Floquet-Lindblad master equation. In those regimes, we also argue for which parameters collective enhancements like a quadratic scaling of the cooling current with N can be expected and support our arguments by numerical simulations.},
  author       = {Kolisnyk, Dmytro and Queißer, Friedemann and Schaller, Gernot and Schützhold, Ralf},
  issn         = {2331-7019},
  journal      = {Physical Review Applied},
  number       = {4},
  publisher    = {American Physical Society},
  title        = {{Floquet analysis of a superradiant many-qutrit refrigerator}},
  doi          = {10.1103/PhysRevApplied.21.044050},
  volume       = {21},
  year         = {2024},
}

@article{18482,
  abstract     = {This paper is dedicated to an optimization problem. Let A, B ⊂ Rn be compact convex sets. Consider the minimal number t0 > 0 such that t0B covers A after a shift to a vector x0 ∈ 
Rn. The goal is to find t0 and x0. In the special case of B being a unit ball centered at zero, x0 and t0 are known as the Chebyshev center and the Chebyshev radius of A. This paper focuses on the case in which A and B are defined with their black-box support functions. An algorithm for solving such problems efficiently is suggested. The algorithm has a superlinear convergence rate, and it can solve hundred-dimensional test problems in a reasonable time, but some additional conditions on A and B are required to guarantee the presence of convergence. Additionally, the behavior of the algorithm for a simple special case is investigated, which leads to a number of theoretical results. Perturbations of this special case are also studied.},
  author       = {Arkhipov, Pavel},
  issn         = {1608-3032},
  journal      = {Automation and Remote Control},
  number       = {6},
  pages        = {522--532},
  publisher    = {Springer Nature},
  title        = {{An algorithm for finding the generalized Chebyshev center of sets defined via their support functions}},
  doi          = {10.1134/S0005117924060031},
  volume       = {85},
  year         = {2024},
}

@inproceedings{18450,
  abstract     = {In this work we present the engineering of a portable platform for sensing SERS signals in droplets microfluidics. This system comprised not only the read-out platform but also a design for the microfluidic devices optimized to enhanced the obtained SERS signals.},
  author       = {Quintero, Sergio and Relvas, Maria and Aranda, Marta and Nodal, Fernando and Dieguez, Lorena and Abalde-Cela, Sara},
  booktitle    = {2024 International Conference on Optical MEMS and Nanophotonics},
  isbn         = {9798350384925},
  issn         = {2160-5041},
  location     = {San Sebastian, Spain},
  publisher    = {IEEE},
  title        = {{Portable Raman platform for SERS droplets microfludics}},
  doi          = {10.1109/OMN61224.2024.10685279},
  year         = {2024},
}

@phdthesis{18588,
  abstract     = {This thesis is an experimental work about two distinct research projects that evolved from a single project: non-equilibrium dynamics of an acoustically vibrated particle and microfabrication of particles with nano-scale 3D printing. The first project explores non equilibrium dynamics of a particle driven by ultrasonic vibrations. We design an experimental system consisting of an electromechanical vibration scheme to drive the particle’s vibrations and an imaging scheme to track its trajectories. We study the trajectories to determine how the particle’s dynamics evolve under the driven conditions, considering out of equilibrium systems in the context of equilibrium statistical mechanics. Using a Langevin framework and the Boltzmann factor, we characterize the particle’s dynamics as complex; the particle motion
is not purely diffusive. We extract physical parameters like spring constant, effective temperature, damping coefficient and resonance frequency.

In the second project, we explore and develop techniques in the design and microfabrication of particles across scales. Microfabrication involves building structures at the micron or submicron scale. These designed miniaturized patterns, objects, or devices are useful in biophysics, pharmacology, medical biology, and nanotechnology. We specifically apply two-photon polymerization, a form of 3D nano printing. We print millimetric particles, characterizing different designs to evaluate and showcase the resolution, aspect ratio integrity and print quality of the printing process. We also design and fabricate a microsensor to deflect under applicable force of order 0.1 pN. We present fundamental concepts needed to design the microsensor, showcasing 3D printing at considerably smaller scales down to the µm or below.},
  author       = {Mweka, Cecelia N},
  issn         = {2791-4585},
  pages        = {61},
  publisher    = {Institute of Science and Technology Austria},
  title        = {{Non equilibrium dynamics of driven individual particles and 3D printing across scales}},
  doi          = {10.15479/at:ista:18588},
  year         = {2024},
}

@misc{14705,
  abstract     = {Since the commercialization of brine shrimp (genus Artemia) in the 1950s, this lineage, and in particular the model species Artemia franciscana, has been the subject of extensive research. However, our understanding of the genetic mechanisms underlying various aspects of their reproductive biology, including sex determination, are still lacking. This is partly due to the scarcity of genomic resources for Artemia species and crustaceans in general. Here, we present a chromosome-level genome assembly of Artemia franciscana (Kellogg 1906), from the Great Salt Lake, USA. The genome is 1GB, and the majority of the genome (81%) is scaffolded into 21 linkage groups using a previously published high-density linkage map. We performed coverage and FST analyses using male and female genomic and transcriptomic reads to quantify the extent of differentiation between the Z and W chromosomes. Additionally, we quantified the expression levels in male and female heads and gonads and found further evidence for dosage compensation in this species.},
  author       = {Elkrewi, Marwan N},
  keywords     = {sex chromosome evolution, genome assembly, dosage compensation},
  publisher    = {Institute of Science and Technology Austria},
  title        = {{Data from "Chromosome-level assembly of Artemia franciscana sheds light on sex-chromosome differentiation"}},
  doi          = {10.15479/AT:ISTA:14705},
  year         = {2024},
}

@inproceedings{17214,
  abstract     = {Current numerical algorithms for simulating friction fall in one of two camps: smooth solvers sacrifice the stable treatment of static friction in exchange for fast convergence, and non-smooth solvers accurately compute friction at convergence rates that are often prohibitive for large graphics applications. We introduce a novel bridge between these two ideas that computes static and dynamic friction stably and efficiently. Our key idea is to convert the highly constrained non-smooth problem into an unconstrained smooth problem using logarithmic barriers that converges to the exact solution as accuracy increases. We phrase the problem as an interior point primal-dual problem that can be solved efficiently with Newton iteration. We observe quadratic convergence despite the non-smooth nature of the original problem, and our method is well-suited for large systems of tightly packed objects with many contact points. We demonstrate the efficacy of our method with stable piles of grains and stacks of objects, complex granular flows, and robust interlocking assemblies of rigid bodies.},
  author       = {Chen, Yi-Lu and Ly, Mickaël and Wojtan, Christopher J},
  booktitle    = {Special Interest Group on Computer Graphics and Interactive Techniques Conference Conference Papers '24},
  isbn         = {9798400705250},
  keywords     = {physical simulation, frictional contact, rigid body mechanics, non-smooth dynamics},
  location     = {Denver, United States},
  publisher    = {Association for Computing Machinery},
  title        = {{Primal-dual non-smooth friction for rigid body animation}},
  doi          = {10.1145/3641519.3657485},
  year         = {2024},
}

@inproceedings{17426,
  abstract     = {The robustness of neural networks against input perturbations with bounded
magnitude represents a serious concern in the deployment of deep learning
models in safety-critical systems. Recently, the scientific community has
focused on enhancing certifiable robustness guarantees by crafting 1-Lipschitz
neural networks that leverage Lipschitz bounded dense and convolutional layers.
Although different methods have been proposed in the literature to achieve this
goal, understanding the performance of such methods is not straightforward,
since different metrics can be relevant (e.g., training time, memory usage,
accuracy, certifiable robustness) for different applications. For this reason,
this work provides a thorough theoretical and empirical comparison between
methods by evaluating them in terms of memory usage, speed, and certifiable
robust accuracy. The paper also provides some guidelines and recommendations to
support the user in selecting the methods that work best depending on the
available resources. We provide code at
https://github.com/berndprach/1LipschitzLayersCompared.},
  author       = {Prach, Bernd and Brau, Fabio and Buttazzo, Giorgio and Lampert, Christoph},
  booktitle    = {Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition},
  location     = {Seattle, WA, United States},
  pages        = {24574--24583},
  publisher    = {Computer Vision Foundation},
  title        = {{1-Lipschitz layers compared: Memory, speed, and certifiable robustness}},
  doi          = {10.1109/CVPR52733.2024.02320},
  year         = {2024},
}

@unpublished{18874,
  abstract     = {Despite extensive research since the community learned about adversarial
examples 10 years ago, we still do not know how to train high-accuracy
classifiers that are guaranteed to be robust to small perturbations of their
inputs. Previous works often argued that this might be because no classifier
exists that is robust and accurate at the same time. However, in computer
vision this assumption does not match reality where humans are usually accurate
and robust on most tasks of interest. We offer an alternative explanation and
show that in certain settings robust generalization is only possible with
unrealistically large amounts of data. More precisely we find a setting where a
robust classifier exists, it is easy to learn an accurate classifier, yet it
requires an exponential amount of data to learn a robust classifier. Based on
this theoretical result, we explore how well robust classifiers generalize on
datasets such as CIFAR-10. We come to the conclusion that on this datasets, the
limitation of current robust models also lies in the generalization, and that
they require a lot of data to do well on the test set. We also show that the
problem is not in the expressiveness or generalization capabilities of current
architectures, and that there are low magnitude features in the data which are
useful for non-robust generalization but are not available for robust
classifiers.},
  author       = {Prach, Bernd and Lampert, Christoph},
  booktitle    = {arXiv},
  title        = {{Intriguing properties of robust classification}},
  doi          = {10.48550/arXiv.2412.04245},
  year         = {2024},
}

