@inproceedings{299, abstract = {We introduce in this paper AMT 2.0 , a tool for qualitative and quantitative analysis of hybrid continuous and Boolean signals that combine numerical values and discrete events. The evaluation of the signals is based on rich temporal specifications expressed in extended Signal Temporal Logic (xSTL), which integrates Timed Regular Expressions (TRE) within Signal Temporal Logic (STL). The tool features qualitative monitoring (property satisfaction checking), trace diagnostics for explaining and justifying property violations and specification-driven measurement of quantitative features of the signal.}, author = {Nickovic, Dejan and Lebeltel, Olivier and Maler, Oded and Ferrere, Thomas and Ulus, Dogan}, editor = {Beyer, Dirk and Huisman, Marieke}, location = {Thessaloniki, Greece}, pages = {303 -- 319}, publisher = {Springer}, title = {{AMT 2.0: Qualitative and quantitative trace analysis with extended signal temporal logic}}, doi = {10.1007/978-3-319-89963-3_18}, volume = {10806}, year = {2018}, } @inproceedings{300, abstract = {We introduce a formal quantitative notion of “bit security” for a general type of cryptographic games (capturing both decision and search problems), aimed at capturing the intuition that a cryptographic primitive with k-bit security is as hard to break as an ideal cryptographic function requiring a brute force attack on a k-bit key space. Our new definition matches the notion of bit security commonly used by cryptographers and cryptanalysts when studying search (e.g., key recovery) problems, where the use of the traditional definition is well established. However, it produces a quantitatively different metric in the case of decision (indistinguishability) problems, where the use of (a straightforward generalization of) the traditional definition is more problematic and leads to a number of paradoxical situations or mismatches between theoretical/provable security and practical/common sense intuition. Key to our new definition is to consider adversaries that may explicitly declare failure of the attack. We support and justify the new definition by proving a number of technical results, including tight reductions between several standard cryptographic problems, a new hybrid theorem that preserves bit security, and an application to the security analysis of indistinguishability primitives making use of (approximate) floating point numbers. This is the first result showing that (standard precision) 53-bit floating point numbers can be used to achieve 100-bit security in the context of cryptographic primitives with general indistinguishability-based security definitions. Previous results of this type applied only to search problems, or special types of decision problems.}, author = {Micciancio, Daniele and Walter, Michael}, location = {Tel Aviv, Israel}, pages = {3 -- 28}, publisher = {Springer}, title = {{On the bit security of cryptographic primitives}}, doi = {10.1007/978-3-319-78381-9_1}, volume = {10820}, year = {2018}, } @inproceedings{302, abstract = {At ITCS 2013, Mahmoody, Moran and Vadhan [MMV13] introduce and construct publicly verifiable proofs of sequential work, which is a protocol for proving that one spent sequential computational work related to some statement. The original motivation for such proofs included non-interactive time-stamping and universally verifiable CPU benchmarks. A more recent application, and our main motivation, are blockchain designs, where proofs of sequential work can be used – in combination with proofs of space – as a more ecological and economical substitute for proofs of work which are currently used to secure Bitcoin and other cryptocurrencies. The construction proposed by [MMV13] is based on a hash function and can be proven secure in the random oracle model, or assuming inherently sequential hash-functions, which is a new standard model assumption introduced in their work. In a proof of sequential work, a prover gets a “statement” χ, a time parameter N and access to a hash-function H, which for the security proof is modelled as a random oracle. Correctness requires that an honest prover can make a verifier accept making only N queries to H, while soundness requires that any prover who makes the verifier accept must have made (almost) N sequential queries to H. Thus a solution constitutes a proof that N time passed since χ was received. Solutions must be publicly verifiable in time at most polylogarithmic in N. The construction of [MMV13] is based on “depth-robust” graphs, and as a consequence has rather poor concrete parameters. But the major drawback is that the prover needs not just N time, but also N space to compute a proof. In this work we propose a proof of sequential work which is much simpler, more efficient and achieves much better concrete bounds. Most importantly, the space required can be as small as log (N) (but we get better soundness using slightly more memory than that). An open problem stated by [MMV13] that our construction does not solve either is achieving a “unique” proof, where even a cheating prover can only generate a single accepting proof. This property would be extremely useful for applications to blockchains.}, author = {Cohen, Bram and Pietrzak, Krzysztof Z}, location = {Tel Aviv, Israel}, pages = {451 -- 467}, publisher = {Springer}, title = {{Simple proofs of sequential work}}, doi = {10.1007/978-3-319-78375-8_15}, volume = {10821}, year = {2018}, } @article{303, abstract = {The theory of tropical series, that we develop here, firstly appeared in the study of the growth of pluriharmonic functions. Motivated by waves in sandpile models we introduce a dynamic on the set of tropical series, and it is experimentally observed that this dynamic obeys a power law. So, this paper serves as a compilation of results we need for other articles and also introduces several objects interesting by themselves.}, author = {Kalinin, Nikita and Shkolnikov, Mikhail}, journal = {Discrete and Continuous Dynamical Systems- Series A}, number = {6}, pages = {2827 -- 2849}, publisher = {AIMS}, title = {{Introduction to tropical series and wave dynamic on them}}, doi = {10.3934/dcds.2018120}, volume = {38}, year = {2018}, } @article{304, abstract = {Additive manufacturing has recently seen drastic improvements in resolution, making it now possible to fabricate features at scales of hundreds or even dozens of nanometers, which previously required very expensive lithographic methods. As a result, additive manufacturing now seems poised for optical applications, including those relevant to computer graphics, such as material design, as well as display and imaging applications. In this work, we explore the use of additive manufacturing for generating structural colors, where the structures are designed using a fabrication-aware optimization process. This requires a combination of full-wave simulation, a feasible parameterization of the design space, and a tailored optimization procedure. Many of these components should be re-usable for the design of other optical structures at this scale. We show initial results of material samples fabricated based on our designs. While these suffer from the prototype character of state-of-the-art fabrication hardware, we believe they clearly demonstrate the potential of additive nanofabrication for structural colors and other graphics applications.}, author = {Auzinger, Thomas and Heidrich, Wolfgang and Bickel, Bernd}, journal = {ACM Transactions on Graphics}, number = {4}, publisher = {ACM}, title = {{Computational design of nanostructural color for additive manufacturing}}, doi = {10.1145/3197517.3201376}, volume = {37}, year = {2018}, } @article{306, abstract = {A cornerstone of statistical inference, the maximum entropy framework is being increasingly applied to construct descriptive and predictive models of biological systems, especially complex biological networks, from large experimental data sets. Both its broad applicability and the success it obtained in different contexts hinge upon its conceptual simplicity and mathematical soundness. Here we try to concisely review the basic elements of the maximum entropy principle, starting from the notion of ‘entropy’, and describe its usefulness for the analysis of biological systems. As examples, we focus specifically on the problem of reconstructing gene interaction networks from expression data and on recent work attempting to expand our system-level understanding of bacterial metabolism. Finally, we highlight some extensions and potential limitations of the maximum entropy approach, and point to more recent developments that are likely to play a key role in the upcoming challenges of extracting structures and information from increasingly rich, high-throughput biological data.}, author = {De Martino, Andrea and De Martino, Daniele}, journal = {Heliyon}, number = {4}, publisher = {Elsevier}, title = {{An introduction to the maximum entropy approach and its application to inference problems in biology}}, doi = {10.1016/j.heliyon.2018.e00596}, volume = {4}, year = {2018}, } @article{308, abstract = {Migrating cells penetrate tissue barriers during development, inflammatory responses, and tumor metastasis. We study if migration in vivo in such three-dimensionally confined environments requires changes in the mechanical properties of the surrounding cells using embryonic Drosophila melanogaster hemocytes, also called macrophages, as a model. We find that macrophage invasion into the germband through transient separation of the apposing ectoderm and mesoderm requires cell deformations and reductions in apical tension in the ectoderm. Interestingly, the genetic pathway governing these mechanical shifts acts downstream of the only known tumor necrosis factor superfamily member in Drosophila, Eiger, and its receptor, Grindelwald. Eiger-Grindelwald signaling reduces levels of active Myosin in the germband ectodermal cortex through the localization of a Crumbs complex component, Patj (Pals-1-associated tight junction protein). We therefore elucidate a distinct molecular pathway that controls tissue tension and demonstrate the importance of such regulation for invasive migration in vivo.}, author = {Ratheesh, Aparna and Biebl, Julia and Smutny, Michael and Veselá, Jana and Papusheva, Ekaterina and Krens, Gabriel and Kaufmann, Walter and György, Attila and Casano, Alessandra M and Siekhaus, Daria E}, journal = {Developmental Cell}, number = {3}, pages = {331 -- 346}, publisher = {Elsevier}, title = {{Drosophila TNF modulates tissue tension in the embryo to facilitate macrophage invasive migration}}, doi = {10.1016/j.devcel.2018.04.002}, volume = {45}, year = {2018}, } @article{1215, abstract = {Two generalizations of Itô formula to infinite-dimensional spaces are given. The first one, in Hilbert spaces, extends the classical one by taking advantage of cancellations when they occur in examples and it is applied to the case of a group generator. The second one, based on the previous one and a limit procedure, is an Itô formula in a special class of Banach spaces having a product structure with the noise in a Hilbert component; again the key point is the extension due to a cancellation. This extension to Banach spaces and in particular the specific cancellation are motivated by path-dependent Itô calculus.}, author = {Flandoli, Franco and Russo, Francesco and Zanco, Giovanni A}, journal = {Journal of Theoretical Probability}, number = {2}, pages = {789--826}, publisher = {Springer}, title = {{Infinite-dimensional calculus under weak spatial regularity of the processes}}, doi = {10.1007/s10959-016-0724-2}, volume = {31}, year = {2018}, } @article{12603, abstract = {We present a field-data rich modelling analysis to reconstruct the climatic forcing, glacier response, and runoff generation from a high-elevation catchment in central Chile over the period 2000–2015 to provide insights into the differing contributions of debris-covered and debris-free glaciers under current and future changing climatic conditions. Model simulations with the physically based glacio-hydrological model TOPKAPI-ETH reveal a period of neutral or slightly positive mass balance between 2000 and 2010, followed by a transition to increasingly large annual mass losses, associated with a recent mega drought. Mass losses commence earlier, and are more severe, for a heavily debris-covered glacier, most likely due to its strong dependence on snow avalanche accumulation, which has declined in recent years. Catchment runoff shows a marked decreasing trend over the study period, but with high interannual variability directly linked to winter snow accumulation, and high contribution from ice melt in dry periods and drought conditions. The study demonstrates the importance of incorporating local-scale processes such as snow avalanche accumulation and spatially variable debris thickness, in understanding the responses of different glacier types to climate change. We highlight the increased dependency of runoff from high Andean catchments on the diminishing resource of glacier ice during dry years.}, author = {Burger, Flavia and Ayala, Alvaro and Farias, David and Shaw, Thomas E. and MacDonell, Shelley and Brock, Ben and McPhee, James and Pellicciotti, Francesca}, issn = {1099-1085}, journal = {Hydrological Processes}, keywords = {Water Science and Technology}, number = {2}, pages = {214--229}, publisher = {Wiley}, title = {{Interannual variability in glacier contribution to runoff from a high‐elevation Andean catchment: Understanding the role of debris cover in glacier hydrology}}, doi = {10.1002/hyp.13354}, volume = {33}, year = {2018}, } @article{12604, abstract = {Glaciers in the high mountains of Asia provide an important water resource for millions of people. Many of these glaciers are partially covered by rocky debris, which protects the ice from solar radiation and warm air. However, studies have found that the surface of these debris-covered glaciers is actually lowering as fast as glaciers without debris. Water ponded on the surface of the glaciers may be partially responsible, as water can absorb atmospheric energy very efficiently. However, the overall effect of these ponds has not been thoroughly assessed yet. We study a valley in Nepal for which we have extensive weather measurements, and we use a numerical model to calculate the energy absorbed by ponds on the surface of the glaciers over 6 months. As we have not observed each individual pond thoroughly, we run the model 5,000 times with different setups. We find that ponds are extremely important for glacier melt and absorb energy 14 times as quickly as the debris-covered ice. Although the ponds account for 1% of the glacier area covered by rocks, and only 0.3% of the total glacier area, they absorb enough energy to account for one eighth of the whole valley's ice loss.}, author = {Miles, Evan S. and Willis, Ian and Buri, Pascal and Steiner, Jakob F. and Arnold, Neil S. and Pellicciotti, Francesca}, issn = {1944-8007}, journal = {Geophysical Research Letters}, keywords = {General Earth and Planetary Sciences, Geophysics}, number = {19}, pages = {10464--10473}, publisher = {American Geophysical Union}, title = {{Surface pond energy absorption across four Himalayan Glaciers accounts for 1/8 of total catchment ice loss}}, doi = {10.1029/2018gl079678}, volume = {45}, year = {2018}, } @article{12605, abstract = {Snow depth patterns over glaciers are controlled by precipitation, snow redistribution due to wind and avalanches, and the exchange of energy with the atmosphere that determines snow ablation. While many studies have advanced the understanding of ablation processes, less is known about winter snow patterns and their variability over glaciers. We analyze snow depth on Haut Glacier d'Arolla, Switzerland, in the two winter seasons 2006–2007 and 2010–2011 to (1) understand whether snow depth over an alpine glacier at the end of the accumulation season exhibits a behavior similar to the one observed on single slopes and vegetated areas; and (2) investigate the snow pattern consistency over the two accumulation seasons. We perform this analysis on a data set of high-resolution lidar-derived snow depth using variograms and fractal parameters. Our first main result is that snow depth patterns on the glacier exhibit a multiscale behavior, with a scale break around 20 m after which the fractal dimension increases, indicating more autocorrelated structure before the scale break than after. Second, this behavior is consistent over the two years, with fractal parameters and their spatial variability almost constant in the two seasons. We also show that snow depth patterns exhibit a distinct behavior in the glacier tongue and the upper catchment, with longer correlation distances on the tongue in the direction of the main winds, suggesting spatial distinctions that are likely induced by different processes and that should be taken into account when extrapolating snow depth from limited samples.}, author = {Clemenzi, I. and Pellicciotti, Francesca and Burlando, P.}, issn = {1944-7973}, journal = {Water Resources Research}, keywords = {Water Science and Technology}, number = {10}, pages = {7929--7945}, publisher = {American Geophysical Union}, title = {{Snow depth structure, fractal behavior, and interannual consistency over Haut Glacier d'Arolla, Switzerland}}, doi = {10.1029/2017wr021606}, volume = {54}, year = {2018}, } @article{12606, abstract = {Ice cliffs within a supraglacial debris cover have been identified as a source for high ablation relative to the surrounding debris-covered area. Due to their small relative size and steep orientation, ice cliffs are difficult to detect using nadir-looking space borne sensors. The method presented here uses surface slopes calculated from digital elevation model (DEM) data to map ice cliff geometry and produce an ice cliff probability map. Surface slope thresholds, which can be sensitive to geographic location and/or data quality, are selected automatically. The method also attempts to include area at the (often narrowing) ends of ice cliffs which could otherwise be neglected due to signal saturation in surface slope data. The method was calibrated in the eastern Alaska Range, Alaska, USA, against a control ice cliff dataset derived from high-resolution visible and thermal data. Using the same input parameter set that performed best in Alaska, the method was tested against ice cliffs manually mapped in the Khumbu Himal, Nepal. Our results suggest the method can accommodate different glaciological settings and different DEM data sources without a data intensive (high-resolution, multi-data source) recalibration.}, author = {Herreid, Sam and Pellicciotti, Francesca}, issn = {1994-0424}, journal = {The Cryosphere}, keywords = {Earth-Surface Processes, Water Science and Technology}, number = {5}, pages = {1811--1829}, publisher = {Copernicus Publications}, title = {{Automated detection of ice cliffs within supraglacial debris cover}}, doi = {10.5194/tc-12-1811-2018}, volume = {12}, year = {2018}, } @article{12607, abstract = {Supraglacial ice cliffs exist on debris-covered glaciers worldwide, but despite their importance as melt hot spots, their life cycle is little understood. Early field observations had advanced a hypothesis of survival of north-facing and disappearance of south-facing cliffs, which is central for predicting the contribution of cliffs to total glacier mass losses. Their role as windows of energy transfer suggests they may explain the anomalously high mass losses of debris-covered glaciers in High Mountain Asia (HMA) despite the insulating debris, currently at the center of a debated controversy. We use a 3D model of cliff evolution coupled to very high-resolution topographic data to demonstrate that ice cliffs facing south (in the Northern Hemisphere) disappear within a few months due to enhanced solar radiation receipts and that aspect is the key control on cliffs evolution. We reproduce continuous flattening of south-facing cliffs, a result of their vertical gradient of incoming solar radiation and sky view factor. Our results establish that only north-facing cliffs are recurrent features and thus stable contributors to the melting of debris-covered glaciers. Satellite observations and mass balance modeling confirms that few south-facing cliffs of small size exist on the glaciers of Langtang, and their contribution to the glacier volume losses is very small (∼1%). This has major implications for the mass balance of HMA debris-covered glaciers as it provides the basis for new parameterizations of cliff evolution and distribution to constrain volume losses in a region where glaciers are highly relevant as water sources for millions of people.}, author = {Buri, Pascal and Pellicciotti, Francesca}, issn = {1091-6490}, journal = {PNAS}, number = {17}, pages = {4369--4374}, publisher = {Proceedings of the National Academy of Sciences}, title = {{Aspect controls the survival of ice cliffs on debris-covered glaciers}}, doi = {10.1073/pnas.1713892115}, volume = {115}, year = {2018}, } @misc{13055, abstract = {Dataset for manuscript 'Social network plasticity decreases disease transmission in a eusocial insect' Compared to previous versions: - raw image files added - correction of URLs within README.txt file }, author = {Stroeymeyt, Nathalie and Grasse, Anna V and Crespi, Alessandro and Mersch, Danielle and Cremer, Sylvia and Keller, Laurent}, publisher = {Zenodo}, title = {{Social network plasticity decreases disease transmission in a eusocial insect}}, doi = {10.5281/ZENODO.1322669}, year = {2018}, } @misc{13059, abstract = {This dataset contains a GitHub repository containing all the data, analysis, Nextflow workflows and Jupyter notebooks to replicate the manuscript titled "Fast and accurate large multiple sequence alignments with a root-to-leaf regressive method". It also contains the Multiple Sequence Alignments (MSAs) generated and well as the main figures and tables from the manuscript. The repository is also available at GitHub (https://github.com/cbcrg/dpa-analysis) release `v1.2`. For details on how to use the regressive alignment algorithm, see the T-Coffee software suite (https://github.com/cbcrg/tcoffee).}, author = {Garriga, Edgar and di Tommaso, Paolo and Magis, Cedrik and Erb, Ionas and Mansouri, Leila and Baltzis, Athanasios and Laayouni, Hafid and Kondrashov, Fyodor and Floden, Evan and Notredame, Cedric}, publisher = {Zenodo}, title = {{Fast and accurate large multiple sequence alignments with a root-to-leaf regressive method}}, doi = {10.5281/ZENODO.2025846}, year = {2018}, } @article{132, abstract = {Pancreas development involves a coordinated process in which an early phase of cell segregation is followed by a longer phase of lineage restriction, expansion, and tissue remodeling. By combining clonal tracing and whole-mount reconstruction with proliferation kinetics and single-cell transcriptional profiling, we define the functional basis of pancreas morphogenesis. We show that the large-scale organization of mouse pancreas can be traced to the activity of self-renewing precursors positioned at the termini of growing ducts, which act collectively to drive serial rounds of stochastic ductal bifurcation balanced by termination. During this phase of branching morphogenesis, multipotent precursors become progressively fate-restricted, giving rise to self-renewing acinar-committed precursors that are conveyed with growing ducts, as well as ductal progenitors that expand the trailing ducts and give rise to delaminating endocrine cells. These findings define quantitatively how the functional behavior and lineage progression of precursor pools determine the large-scale patterning of pancreatic sub-compartments.}, author = {Sznurkowska, Magdalena and Hannezo, Edouard B and Azzarelli, Roberta and Rulands, Steffen and Nestorowa, Sonia and Hindley, Christopher and Nichols, Jennifer and Göttgens, Berthold and Huch, Meritxell and Philpott, Anna and Simons, Benjamin}, journal = {Developmental Cell}, number = {3}, pages = {360 -- 375}, publisher = {Cell Press}, title = {{Defining lineage potential and fate behavior of precursors during pancreas development}}, doi = {10.1016/j.devcel.2018.06.028}, volume = {46}, year = {2018}, } @inproceedings{133, abstract = {Synchronous programs are easy to specify because the side effects of an operation are finished by the time the invocation of the operation returns to the caller. Asynchronous programs, on the other hand, are difficult to specify because there are side effects due to pending computation scheduled as a result of the invocation of an operation. They are also difficult to verify because of the large number of possible interleavings of concurrent computation threads. We present synchronization, a new proof rule that simplifies the verification of asynchronous programs by introducing the fiction, for proof purposes, that asynchronous operations complete synchronously. Synchronization summarizes an asynchronous computation as immediate atomic effect. Modular verification is enabled via pending asynchronous calls in atomic summaries, and a complementary proof rule that eliminates pending asynchronous calls when components and their specifications are composed. We evaluate synchronization in the context of a multi-layer refinement verification methodology on a collection of benchmark programs.}, author = {Kragl, Bernhard and Qadeer, Shaz and Henzinger, Thomas A}, issn = {1868-8969}, location = {Beijing, China}, publisher = {Schloss Dagstuhl - Leibniz-Zentrum für Informatik}, title = {{Synchronizing the asynchronous}}, doi = {10.4230/LIPIcs.CONCUR.2018.21}, volume = {118}, year = {2018}, } @article{21096, abstract = {By using a combination of readily accessible experimental and computational experiments in water, we explored the factors governing the association between polyanionic dyn[4]arene and a series of α,ω-alkyldiammonium ions of increasing chain length. We found that the lock-and-key concept based on the best match between the apolar and polar regions of the molecular partners failed to explain the observed selectivities. Instead, the dissection of the energetic and structural contributions demonstrated that the binding events were actually guided by two crucial solvent-related phenomena as the chain length of the guest increases: the expected decrease of the enthalpic cost of guest desolvation and the unexpected increase of the favourable enthalpy of complex solvation. By bringing to light the decisive enthalpic impact of complex solvation during the binding of polyelectrolytes by inclusion, this study may provide a missing piece to a puzzle that one day could display the global picture of molecular recognition in water.}, author = {Jeamet, Emeric and Septavaux, Jean and Héloin, Alexandre and Donnier-Maréchal, Marion and Dumartin, Melissa and Ourri, Benjamin and Mandal, Pradeep K and Huc, Ivan and Bignon, Emmanuelle and Dumont, Elise and Morell, Christophe and Francoia, Jean-Patrick and Perret, Florent and Vial, Laurent and Leclaire, Julien}, issn = {2041-6539}, journal = {Chemical Science}, number = {1}, pages = {277--283}, publisher = {Royal Society of Chemistry}, title = {{Wetting the lock and key enthalpically favours polyelectrolyte binding}}, doi = {10.1039/c8sc02966k}, volume = {10}, year = {2018}, } @article{21533, abstract = {Recent advances in the fabrication of nanostructures and nanoscale features in metasurfaces offer new prospects for generating visible light emission from low-energy electrons. Here we present the experimental observation of visible light emission from low-energy free electrons interacting with nanoscale periodic surfaces through the Smith–Purcell (SP) effect. We demonstrate SP light emission from nanoscale gratings with periodicity as small as 50 nm, enabling the observation of tunable visible radiation from low-energy electrons (1.5 to 6 keV), an order of magnitude lower in energy than previously reported. We study the emission wavelength and intensity dependence on the grating pitch and electron energy, showing agreement between experiment and theory. Our results open the way to the production of SP-based nanophotonics integrated devices. Built inside electron microscopes, SP sources could enable the development of novel electron–optical correlated spectroscopic techniques and facilitate the observation of new quantum effects in light sources.}, author = {Massuda, Aviram and Roques-Carmes, Charles and Yang, Yujia and Kooi, Steven E. and Yang, Yi and Murdia, Chitraang and Berggren, Karl K. and Kaminer, Ido and Soljačić, Marin}, issn = {2330-4022}, journal = {ACS Photonics}, keywords = {light−matter interactions, periodic structures, nanophotonics, free-electron light sources}, number = {9}, pages = {3513--3518}, publisher = {American Chemical Society }, title = {{Smith–Purcell radiation from low-energy electrons}}, doi = {10.1021/acsphotonics.8b00743}, volume = {5}, year = {2018}, } @article{21545, abstract = {Free-electron radiation such as Cerenkov1, Smith–Purcell2 and transition radiation3,4 can be greatly affected by structured optical environments, as has been demonstrated in a variety of polaritonic5,6, photonic-crystal7 and metamaterial8,9,10 systems. However, the amount of radiation that can ultimately be extracted from free electrons near an arbitrary material structure has remained elusive. Here we derive a fundamental upper limit to the spontaneous photon emission and energy loss of free electrons, regardless of geometry, which illuminates the effects of material properties and electron velocities. We obtain experimental evidence for our theory with quantitative measurements of Smith–Purcell radiation. Our framework allows us to make two predictions. One is a new regime of radiation operation—at subwavelength separations, slower (non-relativistic) electrons can achieve stronger radiation than fast (relativistic) electrons. The other is a divergence of the emission probability in the limit of lossless materials. We further reveal that such divergences can be approached by coupling free electrons to photonic bound states in the continuum11,12,13. Our findings suggest that compact and efficient free-electron radiation sources from microwaves to the soft X-ray regime may be achievable without requiring ultrahigh accelerating voltages.}, author = {Yang, Yi and Massuda, Aviram and Roques-Carmes, Charles and Kooi, Steven E. and Christensen, Thomas and Johnson, Steven G. and Joannopoulos, John D. and Miller, Owen D. and Kaminer, Ido and Soljačić, Marin}, issn = {1745-2481}, journal = {Nature Physics}, pages = {894--899}, publisher = {Springer Nature}, title = {{Maximal spontaneous photon emission and energy loss from free electrons}}, doi = {10.1038/s41567-018-0180-2}, volume = {14}, year = {2018}, }