@article{19073, abstract = {The rapid development of superconducting quantum hardware is expected to run into substantial restrictions on scalability because error correction in a cryogenic environment has stringent input–output requirements. Classical data centres rely on fibre-optic interconnects to remove similar networking bottlenecks. In the same spirit, ultracold electro-optic links have been proposed and used to generate qubit control signals, or to replace cryogenic readout electronics. So far, these approaches have suffered from either low efficiency, low bandwidth or additional noise. Here we realize radio-over-fibre qubit readout at millikelvin temperatures. We use one device to simultaneously perform upconversion and downconversion between microwave and optical frequencies and so do not require any active or passive cryogenic microwave equipment. We demonstrate all-optical single-shot readout in a circulator-free readout scheme. Importantly, we do not observe any direct radiation impact on the qubit state, despite the absence of shielding elements. This compatibility between superconducting circuits and telecom-wavelength light is not only a prerequisite to establish modular quantum networks, but it is also relevant for multiplexed readout of superconducting photon detectors and classical superconducting logic.}, author = {Arnold, Georg M and Werner, Thomas and Sahu, Rishabh and Kapoor, Lucky and Qiu, Liu and Fink, Johannes M}, issn = {1745-2481}, journal = {Nature Physics}, publisher = {Springer Nature}, title = {{All-optical superconducting qubit readout}}, doi = {10.1038/s41567-024-02741-4}, volume = {21}, year = {2025}, } @phdthesis{18871, abstract = {"Can we do this with a new type of computer - a quantum computer?". This famous quotation of the brilliant Richard Feynman within a conference talk on "Simulating physics with computers.” is often reverently praised as the origin of the field of quantum computing. The idea was to use quantum mechanical systems itself to simulate "Nature", which is inherently quantum mechanical. Now, 43 years later, the theoretical framework of how such a computer can operate has been developed. Two main important concepts for a potential quantum supremacy, superposition and entanglement, have been exploited to design quantum algorithms to significantly speed up certain tasks. Yet, the specific hardware implementation is still far from being certain, in fact the race between the most promising platforms such as superconducting qubits, bosonic codes, cold atoms, trapped ions, optical computing as well as spin qubits has recently intensified. If one also includes the most mature applications of quantum communication technologies, secure quantum key distribution and quantum random number generators, as part of a quantum information technology ecosystem, we are confronted with a plethora of different materials, concepts, and also operation frequencies. While superconducting qubits, bosonic codes and spin qubits work in the regime of approximately 5 GHz and are controlled by electrical fields, trapped ions, cold atoms, and optical quantum computing operate with light in the infrared or visible range. Consequently, a quantum frequency converter or microwave-optic transducer is required to interface the different frequency domains or establish a long-range network connection with suitable telecom fibers. In fact, the combination of different frequency regimes is also an essential part in our classical modern communication network, where computations are performed in electrical circuits and the information exchange over longer distances happens via optical fibers. However, the specific challenges specific to building a quantum computer, also apply to the development of such a quantum frequency transducer: 1) As we deal with single excitations as the carrier of information, i.e. the smallest possible quantity, the signal can easily be corrupted by other noise sources which needs to be avoided by all means. This is also the reason why microwave quantum computers operate at temperature environments close to zero temperature (< 0.1 Kelvin) to avoid corruption by thermal noise. 2) The frequency interface generally needs to preserve the phase of the signal as an essential part of the quantum state. And 3) Quantum signals cannot be copied which would be a typical strategy to account for errors in classical computers. And finally, there is a challenge specific to microwave-optic transducers: While quantum computers are operating in one specific frequency domain, microwave-optic transducers combine microwave and optical fields in one device. This results in the particular challenge that high-energy optical radiation, which is usually well-shielded from superconducting microwave quantum processors, are now an essential part of the device. The concomitant optical radiation in the operating transducer will inevitably have a detrimental effect on the superconducting microwave components. Together with the requirement of minimal background noise for quantum-limited operation as described above, v heating from the absorption of optical photons within the same device where single microwave excitations are processed forms a formidable challenge. This thesis aims to address this challenge by developing microwave-optic transducers where the impact of optical absorption on superconducting circuits in general and superconducting qubits specifically can be mitigated. In our first approach, we developed a compact device with optimized interaction strengths between the different frequency domains. This minimizes the optical powers used for transducer operation and thus the optical absorption heating. This work was - to the best of our knowledge - the first comprehensive noise study, in an integrated microwave-optic transducer. Unfortunately, we saw that the optical absorption heating added noise way above a single excitation. Consequently, a potential quantum signal would have been buried in the noise, added by the transduction. Building on this insight, we utilized a three-dimensional microwave-optic transducer instead of an integrated device. The larger heat capacity of the macroscopic device with a size of a few millimeters can absorb a larger fraction of the optical heating before it increases the temperature of the device. This allowed us to interface the transducer directly with a superconducting qubit to readout the qubit state in a novel all-optical manner. We showed that the microwave-optic transducer can be operated in a regime in which optical fields don’t harm the sensitive qubit. This is an important prerequisite for the operation of microwave-optic transducers in conjunction with microwave quantum processors and brings the integration and seamless orchestration of different frequency components in a quantum network a step closer. }, author = {Arnold, Georg M}, issn = {2663-337X}, pages = {135}, publisher = {Institute of Science and Technology Austria}, title = {{Microwave-optic interconnects for superconducting circuits}}, doi = {10.15479/at:ista:18871}, year = {2025}, } @inproceedings{14872, abstract = {We entangled microwave and optical photons for the first time as verified by a measured two-mode vacuum squeezing of 0.7 dB. This electro-optic entanglement is the key resource needed to connect cryogenic quantum circuits.}, author = {Sahu, Rishabh and Qiu, Liu and Hease, William J and Arnold, Georg M and Minoguchi, Yuri and Rabl, Peter and Fink, Johannes M}, booktitle = {Frontiers in Optics + Laser Science 2023}, isbn = {9781957171296}, location = {Tacoma, WA, United States}, publisher = {Optica Publishing Group}, title = {{Entangling microwaves and telecom wavelength light}}, doi = {10.1364/ls.2023.lm1f.3}, year = {2023}, } @article{13106, abstract = {Quantum entanglement is a key resource in currently developed quantum technologies. Sharing this fragile property between superconducting microwave circuits and optical or atomic systems would enable new functionalities, but this has been hindered by an energy scale mismatch of >104 and the resulting mutually imposed loss and noise. In this work, we created and verified entanglement between microwave and optical fields in a millikelvin environment. Using an optically pulsed superconducting electro-optical device, we show entanglement between propagating microwave and optical fields in the continuous variable domain. This achievement not only paves the way for entanglement between superconducting circuits and telecom wavelength light, but also has wide-ranging implications for hybrid quantum networks in the context of modularization, scaling, sensing, and cross-platform verification.}, author = {Sahu, Rishabh and Qiu, Liu and Hease, William J and Arnold, Georg M and Minoguchi, Y. and Rabl, P. and Fink, Johannes M}, issn = {1095-9203}, journal = {Science}, keywords = {Multidisciplinary}, number = {6646}, pages = {718--721}, publisher = {American Association for the Advancement of Science}, title = {{Entangling microwaves with light}}, doi = {10.1126/science.adg3812}, volume = {380}, year = {2023}, } @article{13200, abstract = {Recent quantum technologies have established precise quantum control of various microscopic systems using electromagnetic waves. Interfaces based on cryogenic cavity electro-optic systems are particularly promising, due to the direct interaction between microwave and optical fields in the quantum regime. Quantum optical control of superconducting microwave circuits has been precluded so far due to the weak electro-optical coupling as well as quasi-particles induced by the pump laser. Here we report the coherent control of a superconducting microwave cavity using laser pulses in a multimode electro-optical device at millikelvin temperature with near-unity cooperativity. Both the stationary and instantaneous responses of the microwave and optical modes comply with the coherent electro-optical interaction, and reveal only minuscule amount of excess back-action with an unanticipated time delay. Our demonstration enables wide ranges of applications beyond quantum transductions, from squeezing and quantum non-demolition measurements of microwave fields, to entanglement generation and hybrid quantum networks.}, author = {Qiu, Liu and Sahu, Rishabh and Hease, William J and Arnold, Georg M and Fink, Johannes M}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Nature Research}, title = {{Coherent optical control of a superconducting microwave cavity via electro-optical dynamical back-action}}, doi = {10.1038/s41467-023-39493-3}, volume = {14}, year = {2023}, } @unpublished{18953, abstract = {The rapid development of superconducting quantum hardware is expected to run into significant I/O restrictions due to the need for large-scale error correction in a cryogenic environment. Classical data centers rely on fiber-optic interconnects to remove similar networking bottlenecks and to allow for reconfigurable, software-defined infrastructures. In the same spirit, ultra-cold electro-optic links have been proposed and used to generate qubit control signals, or to replace cryogenic readout electronics. So far, the latter suffered from either low efficiency, low bandwidth and the need for additional microwave drives, or breaking of Cooper pairs and qubit states. In this work we realize electro-optic microwave photonics at millikelvin temperatures to implement a radio-over-fiber qubit readout that does not require any active or passive cryogenic microwave equipment. We demonstrate all-optical single-shot-readout by means of the Jaynes-Cummings nonlinearity in a circulator-free readout scheme. Importantly, we do not observe any direct radiation impact on the qubit state as verified with high-fidelity quantum-non-demolition measurements despite the absence of shielding elements. This compatibility between superconducting circuits and telecom wavelength light is not only a prerequisite to establish modular quantum networks, it is also relevant for multiplexed readout of superconducting photon detectors and classical superconducting logic. Moreover, this experiment showcases the potential of electro-optic radiometry in harsh environments - an electronics-free sensing principle that extends into the THz regime with applications in radio astronomy, planetary missions and earth observation.}, author = {Arnold, Georg M and Werner, Thomas and Sahu, Rishabh and Kapoor, Lucky and Qiu, Liu and Fink, Johannes M}, booktitle = {arXiv}, title = {{All-optical single-shot readout of a superconducting qubit}}, doi = {10.48550/ARXIV.2310.16817}, year = {2023}, } @inproceedings{12088, abstract = {We present a quantum-enabled microwave-telecom interface with bidirectional conversion efficiencies up to 15% and added input noise quanta as low as 0.16. Moreover, we observe evidence for electro-optic laser cooling and vacuum amplification.}, author = {Sahu, Rishabh and Hease, William J and Rueda Sanchez, Alfredo R and Arnold, Georg M and Qiu, Liu and Fink, Johannes M}, booktitle = {Conference on Lasers and Electro-Optics}, isbn = {9781557528209}, location = {San Jose, CA, United States}, publisher = {Optica Publishing Group}, title = {{Realizing a quantum-enabled interconnect between microwave and telecom light}}, doi = {10.1364/CLEO_QELS.2022.FW4D.4}, year = {2022}, } @article{10924, abstract = {Solid-state microwave systems offer strong interactions for fast quantum logic and sensing but photons at telecom wavelength are the ideal choice for high-density low-loss quantum interconnects. A general-purpose interface that can make use of single photon effects requires < 1 input noise quanta, which has remained elusive due to either low efficiency or pump induced heating. Here we demonstrate coherent electro-optic modulation on nanosecond-timescales with only 0.16+0.02−0.01 microwave input noise photons with a total bidirectional transduction efficiency of 8.7% (or up to 15% with 0.41+0.02−0.02), as required for near-term heralded quantum network protocols. The use of short and high-power optical pump pulses also enables near-unity cooperativity of the electro-optic interaction leading to an internal pure conversion efficiency of up to 99.5%. Together with the low mode occupancy this provides evidence for electro-optic laser cooling and vacuum amplification as predicted a decade ago.}, author = {Sahu, Rishabh and Hease, William J and Rueda Sanchez, Alfredo R and Arnold, Georg M and Qiu, Liu and Fink, Johannes M}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Springer Nature}, title = {{Quantum-enabled operation of a microwave-optical interface}}, doi = {10.1038/s41467-022-28924-2}, volume = {13}, year = {2022}, } @misc{13056, abstract = {This datasets comprises all data shown in plots of the submitted article "Converting microwave and telecom photons with a silicon photonic nanomechanical interface". Additional raw data are available from the corresponding author on reasonable request.}, author = {Arnold, Georg M and Wulf, Matthias and Barzanjeh, Shabir and Redchenko, Elena and Rueda Sanchez, Alfredo R and Hease, William J and Hassani, Farid and Fink, Johannes M}, publisher = {Zenodo}, title = {{Converting microwave and telecom photons with a silicon photonic nanomechanical interface}}, doi = {10.5281/ZENODO.3961561}, year = {2020}, } @misc{13071, abstract = {This dataset comprises all data shown in the plots of the main part of the submitted article "Bidirectional Electro-Optic Wavelength Conversion in the Quantum Ground State". Additional raw data are available from the corresponding author on reasonable request.}, author = {Hease, William J and Rueda Sanchez, Alfredo R and Sahu, Rishabh and Wulf, Matthias and Arnold, Georg M and Schwefel, Harald and Fink, Johannes M}, publisher = {Zenodo}, title = {{Bidirectional electro-optic wavelength conversion in the quantum ground state}}, doi = {10.5281/ZENODO.4266025}, year = {2020}, } @article{8529, abstract = {Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a Vπ as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.}, author = {Arnold, Georg M and Wulf, Matthias and Barzanjeh, Shabir and Redchenko, Elena and Rueda Sanchez, Alfredo R and Hease, William J and Hassani, Farid and Fink, Johannes M}, issn = {2041-1723}, journal = {Nature Communications}, keywords = {General Biochemistry, Genetics and Molecular Biology, General Physics and Astronomy, General Chemistry}, publisher = {Springer Nature}, title = {{Converting microwave and telecom photons with a silicon photonic nanomechanical interface}}, doi = {10.1038/s41467-020-18269-z}, volume = {11}, year = {2020}, } @article{9114, abstract = {Microwave photonics lends the advantages of fiber optics to electronic sensing and communication systems. In contrast to nonlinear optics, electro-optic devices so far require classical modulation fields whose variance is dominated by electronic or thermal noise rather than quantum fluctuations. Here we demonstrate bidirectional single-sideband conversion of X band microwave to C band telecom light with a microwave mode occupancy as low as 0.025 ± 0.005 and an added output noise of less than or equal to 0.074 photons. This is facilitated by radiative cooling and a triply resonant ultra-low-loss transducer operating at millikelvin temperatures. The high bandwidth of 10.7 MHz and total (internal) photon conversion efficiency of 0.03% (0.67%) combined with the extremely slow heating rate of 1.1 added output noise photons per second for the highest available pump power of 1.48 mW puts near-unity efficiency pulsed quantum transduction within reach. Together with the non-Gaussian resources of superconducting qubits this might provide the practical foundation to extend the range and scope of current quantum networks in analogy to electrical repeaters in classical fiber optic communication.}, author = {Hease, William J and Rueda Sanchez, Alfredo R and Sahu, Rishabh and Wulf, Matthias and Arnold, Georg M and Schwefel, Harald G.L. and Fink, Johannes M}, issn = {2691-3399}, journal = {PRX Quantum}, number = {2}, publisher = {American Physical Society}, title = {{Bidirectional electro-optic wavelength conversion in the quantum ground state}}, doi = {10.1103/prxquantum.1.020315}, volume = {1}, year = {2020}, } @article{6609, abstract = {Mechanical systems facilitate the development of a hybrid quantum technology comprising electrical, optical, atomic and acoustic degrees of freedom1, and entanglement is essential to realize quantum-enabled devices. Continuous-variable entangled fields—known as Einstein–Podolsky–Rosen (EPR) states—are spatially separated two-mode squeezed states that can be used for quantum teleportation and quantum communication2. In the optical domain, EPR states are typically generated using nondegenerate optical amplifiers3, and at microwave frequencies Josephson circuits can serve as a nonlinear medium4,5,6. An outstanding goal is to deterministically generate and distribute entangled states with a mechanical oscillator, which requires a carefully arranged balance between excitation, cooling and dissipation in an ultralow noise environment. Here we observe stationary emission of path-entangled microwave radiation from a parametrically driven 30-micrometre-long silicon nanostring oscillator, squeezing the joint field operators of two thermal modes by 3.40 decibels below the vacuum level. The motion of this micromechanical system correlates up to 50 photons per second per hertz, giving rise to a quantum discord that is robust with respect to microwave noise7. Such generalized quantum correlations of separable states are important for quantum-enhanced detection8 and provide direct evidence of the non-classical nature of the mechanical oscillator without directly measuring its state9. This noninvasive measurement scheme allows to infer information about otherwise inaccessible objects, with potential implications for sensing, open-system dynamics and fundamental tests of quantum gravity. In the future, similar on-chip devices could be used to entangle subsystems on very different energy scales, such as microwave and optical photons.}, author = {Barzanjeh, Shabir and Redchenko, Elena and Peruzzo, Matilda and Wulf, Matthias and Lewis, Dylan and Arnold, Georg M and Fink, Johannes M}, journal = {Nature}, pages = {480--483}, publisher = {Nature Publishing Group}, title = {{Stationary entangled radiation from micromechanical motion}}, doi = {10.1038/s41586-019-1320-2}, volume = {570}, year = {2019}, }