@article{19401, abstract = {High kinetic inductance superconductors are gaining increasing interest for the realisation of qubits, amplifiers and detectors. Moreover, thanks to their high impedance, quantum buses made of such materials enable large zero-point fluctuations of the voltage, boosting the coupling rates to spin and charge qubits. However, fully exploiting the potential of disordered or granular superconductors is challenging, as their inductance and, therefore, impedance at high values are difficult to control. Here, we report a reproducible fabrication of granular aluminium resonators by developing a wireless ohmmeter, which allows in situ measurements during film deposition and, therefore, control of the kinetic inductance of granular aluminium films. Reproducible fabrication of circuits with impedances (inductances) exceeding 13 kΩ (1 nH per square) is now possible. By integrating a 7.9 kΩ resonator with a germanium double quantum dot, we demonstrate strong charge-photon coupling with a rate of gc/2π = 566 ± 2 MHz. This broadly applicable method opens the path for novel qubits and high-fidelity, long-distance two-qubit gates.}, author = {Janik, Marian and Roux, Kevin Etienne Robert and Borja Espinosa, Carla N and Sagi, Oliver and Baghdadi, Abdulhamid and Adletzberger, Thomas and Calcaterra, Stefano and Botifoll, Marc and Garzón Manjón, Alba and Arbiol, Jordi and Chrastina, Daniel and Isella, Giovanni and Pop, Ioan M. and Katsaros, Georgios}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Springer Nature}, title = {{Strong charge-photon coupling in planar germanium enabled by granular aluminium superinductors}}, doi = {10.1038/s41467-025-57252-4}, volume = {16}, year = {2025}, } @article{14793, abstract = {Superconductor/semiconductor hybrid devices have attracted increasing interest in the past years. Superconducting electronics aims to complement semiconductor technology, while hybrid architectures are at the forefront of new ideas such as topological superconductivity and protected qubits. In this work, we engineer the induced superconductivity in two-dimensional germanium hole gas by varying the distance between the quantum well and the aluminum. We demonstrate a hard superconducting gap and realize an electrically and flux tunable superconducting diode using a superconducting quantum interference device (SQUID). This allows to tune the current phase relation (CPR), to a regime where single Cooper pair tunneling is suppressed, creating a sin(2y) CPR. Shapiro experiments complement this interpretation and the microwave drive allows to create a diode with ≈ 100% efficiency. The reported results open up the path towards integration of spin qubit devices, microwave resonators and (protected) superconducting qubits on the same silicon technology compatible platform.}, author = {Valentini, Marco and Sagi, Oliver and Baghumyan, Levon and de Gijsel, Thijs and Jung, Jason and Calcaterra, Stefano and Ballabio, Andrea and Aguilera Servin, Juan L and Aggarwal, Kushagra and Janik, Marian and Adletzberger, Thomas and Seoane Souto, Rubén and Leijnse, Martin and Danon, Jeroen and Schrade, Constantin and Bakkers, Erik and Chrastina, Daniel and Isella, Giovanni and Katsaros, Georgios}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Springer Nature}, title = {{Parity-conserving Cooper-pair transport and ideal superconducting diode in planar germanium}}, doi = {10.1038/s41467-023-44114-0}, volume = {15}, year = {2024}, } @unpublished{18144, abstract = {High kinetic inductance superconductors are gaining increasing interest for the realisation of qubits, amplifiers and detectors. Moreover, thanks to their high impedance, quantum buses made of such materials enable large zero-point fluctuations of the voltage, boosting the coupling rates to spin and charge qubits. However, fully exploiting the potential of disordered or granular superconductors is challenging, as their inductance and, therefore, impedance at high values are difficult to control. Here we have integrated a granular aluminium resonator, having a characteristic impedance exceeding the resistance quantum, with a germanium double quantum dot and demonstrate strong charge-photon coupling with a rate of $g_\text{c}/2\pi= (566 \pm 2)$ MHz. This was achieved due to the realisation of a wireless ohmmeter, which allows \emph{in situ} measurements during film deposition and, therefore, control of the kinetic inductance of granular aluminium films. Reproducible fabrication of circuits with impedances (inductances) exceeding 13 k$\Omega$ (1 nH per square) is now possible. This broadly applicable method opens the path for novel qubits and high-fidelity, long-distance two-qubit gates.}, author = {Janik, Marian and Roux, Kevin Etienne Robert and Borja Espinosa, Carla N and Sagi, Oliver and Baghdadi, Abdulhamid and Adletzberger, Thomas and Calcaterra, Stefano and Botifoll, Marc and Manjón, Alba Garzón and Arbiol, Jordi and Chrastina, Daniel and Isella, Giovanni and Pop, Ioan M. and Katsaros, Georgios}, booktitle = {arXiv}, title = {{Strong charge-photon coupling in planar germanium enabled by granular aluminium superinductors}}, doi = {10.48550/arXiv.2407.03079}, year = {2024}, } @unpublished{13312, abstract = {Superconductor/semiconductor hybrid devices have attracted increasing interest in the past years. Superconducting electronics aims to complement semiconductor technology, while hybrid architectures are at the forefront of new ideas such as topological superconductivity and protected qubits. In this work, we engineer the induced superconductivity in two-dimensional germanium hole gas by varying the distance between the quantum well and the aluminum. We demonstrate a hard superconducting gap and realize an electrically and flux tunable superconducting diode using a superconducting quantum interference device (SQUID). This allows to tune the current phase relation (CPR), to a regime where single Cooper pair tunneling is suppressed, creating a $ \sin \left( 2 \varphi \right)$ CPR. Shapiro experiments complement this interpretation and the microwave drive allows to create a diode with $ \approx 100 \%$ efficiency. The reported results open up the path towards monolithic integration of spin qubit devices, microwave resonators and (protected) superconducting qubits on a silicon technology compatible platform.}, author = {Valentini, Marco and Sagi, Oliver and Baghumyan, Levon and Gijsel, Thijs de and Jung, Jason and Calcaterra, Stefano and Ballabio, Andrea and Servin, Juan Aguilera and Aggarwal, Kushagra and Janik, Marian and Adletzberger, Thomas and Souto, Rubén Seoane and Leijnse, Martin and Danon, Jeroen and Schrade, Constantin and Bakkers, Erik and Chrastina, Daniel and Isella, Giovanni and Katsaros, Georgios}, booktitle = {arXiv}, keywords = {Mesoscale and Nanoscale Physics}, title = {{Radio frequency driven superconducting diode and parity conserving Cooper pair transport in a two-dimensional germanium hole gas}}, doi = {10.48550/arXiv.2306.07109}, year = {2023}, }