@article{21762, abstract = {Bacteria, like eukaryotes, use conserved cytoskeletal systems for intracellular organization. The plasmid-encoded ParMRC system forms actin-like filaments that segregate low–copy number plasmids. In multicellular cyanobacteria such as Anabaena sp., we found that a chromosomally encoded ParMR system has evolved into a cytoskeletal system named CorMR with a function in cell shape control rather than DNA segregation. Live-cell imaging, in vitro reconstitution, and cryo–electron microscopy revealed that CorM formed dynamically unstable, antiparallel double-stranded filaments that were recruited to the membrane by CorR through an amphipathic helix conserved in multicellular cyanobacteria. CorMR filaments were regulated by MinC, which excluded them from the poles and division plane. Comparative genomics indicated that the repurposing of ParMR and Min systems coevolved with cyanobacterial multicellularity, highlighting the evolutionary plasticity of cytoskeletal systems in bacteria.}, author = {Springstein, Benjamin L and Javoor, Manjunath and Megrian, Daniela and Hajdu, Roman and Hanke, Dustin M. and Zens, Bettina and Weiss, Gregor L. and Schur, Florian Km and Loose, Martin}, issn = {1095-9203}, journal = {Science}, number = {6795}, publisher = {AAAS}, title = {{Repurposing of a DNA segregation machinery into a cytoskeletal system controlling cell shape}}, doi = {10.1126/science.aea6343}, volume = {392}, year = {2026}, } @article{19795, abstract = {Super-resolution microscopy often entails long acquisition times of minutes to hours. Since drifts during the acquisition adversely affect data quality, active sample stabilization is commonly used for some of these techniques to reach their full potential. Although drifts in the lateral plane can often be corrected after acquisition, this is not always possible or may come with drawbacks. Therefore, it is appealing to stabilize sample position in three dimensions (3D) during acquisition. Various schemes for active sample stabilization have been demonstrated previously, with some reaching sub-nanometer stability in 3D. Here, we present a scheme for active drift correction that delivers the nanometer-scale 3D stability demanded by state-of-the-art super-resolution techniques and is straightforward to implement compared to previous schemes capable of reaching this level of stabilization precision. Using a refined algorithm that can handle various types of reference structure, without sparse signal peaks being mandatory, we stabilized sample position to ∼1 nm in 3D using objective lenses both with high and low numerical aperture. Our implementation requires only the addition of a simple widefield imaging path and we provide an open-source control software with graphical user interface to facilitate easy adoption of the module. Finally, we demonstrate how this has the potential to enhance data collection for diffraction-limited and super-resolution imaging techniques using single-molecule localization microscopy and cryo-confocal imaging as showcases.}, author = {Vorlaufer, Jakob and Semenov, Nikolai and Kreuzinger, Caroline and Javoor, Manjunath and Zens, Bettina and Agudelo Duenas, Nathalie and Tavakoli, Mojtaba and Suplata, Marek and Jahr, Wiebke and Lyudchik, Julia and Wartak, Andreas and Schur, Florian Km and Danzl, Johann G}, issn = {2667-0747}, journal = {Biophysical Reports}, number = {2}, publisher = {Elsevier}, title = {{Image-based 3D active sample stabilization on the nanometer scale for optical microscopy}}, doi = {10.1016/j.bpr.2025.100211}, volume = {5}, year = {2025}, } @article{20370, abstract = {The Huntingtin protein (HTT), named for its role in Huntington’s disease, has been best understood as a scaffolding protein that promotes vesicle transport by molecular motors along microtubules. Here, we show that HTT also interacts with the actin cytoskeleton, and its loss of function disturbs the morphology and function of the axonal growth cone. We demonstrate that HTT organizes F-actin into bundles. Cryo–electron tomography (cryo-ET) and subtomogram averaging (STA) structural analyses reveal that HTT’s N-terminal HEAT and Bridge domains wrap around F-actin, while the C-terminal HEAT domain is displaced; furthermore, HTT dimerizes via the N-HEAT domain to bridge parallel actin filaments separated by ~20 nanometers. Our study provides the structural basis for understanding how HTT interacts with and organizes the actin cytoskeleton.}, author = {Carpentier, Rémi and Kim, Jaesung and Capizzi, Mariacristina and Kim, Hyeongju and Fäßler, Florian and Hansen, Jesse and Kim, Min Jeong and Denarier, Eric and Blot, Béatrice and Degennaro, Marine and Labou, Sophia and Arnal, Isabelle and Marcaida, Maria J. and Peraro, Matteo Dal and Kim, Doory and Schur, Florian KM and Song, Ji-Joon and Humbert, Sandrine}, issn = {2375-2548}, journal = {Science Advances}, number = {38}, publisher = {AAAS}, title = {{Structure of the Huntingtin F-actin complex reveals its role in cytoskeleton organization}}, doi = {10.1126/sciadv.adw4124}, volume = {11}, year = {2025}, } @article{17884, abstract = {Human T cell leukemia virus type 1 (HTLV-1) immature particles differ in morphology from other retroviruses, suggesting a distinct way of assembly. Here we report the results of cryo-electron tomography studies of HTLV-1 virus-like particles assembled in vitro, as well as derived from cells. This work shows that HTLV-1 uses a distinct mechanism of Gag–Gag interactions to form the immature viral lattice. Analysis of high-resolution structural information from immature capsid (CA) tubular arrays reveals that the primary stabilizing component in HTLV-1 is the N-terminal domain of CA. Mutagenesis analysis supports this observation. This distinguishes HTLV-1 from other retroviruses, in which the stabilization is provided primarily by the C-terminal domain of CA. These results provide structural details of the quaternary arrangement of Gag for an immature deltaretrovirus and this helps explain why HTLV-1 particles are morphologically distinct.}, author = {Obr, Martin and Percipalle, Mathias and Chernikova, Darya and Yang, Huixin and Thader, Andreas and Pinke, Gergely and Porley, Dario J and Mansky, Louis M. and Dick, Robert A. and Schur, Florian KM}, issn = {1545-9985}, journal = {Nature Structural & Molecular Biology}, pages = {268--276}, publisher = {Springer Nature}, title = {{Distinct stabilization of the human T cell leukemia virus type 1 immature Gag lattice}}, doi = {10.1038/s41594-024-01390-8}, volume = {32}, year = {2025}, } @article{14979, abstract = {Poxviruses are among the largest double-stranded DNA viruses, with members such as variola virus, monkeypox virus and the vaccination strain vaccinia virus (VACV). Knowledge about the structural proteins that form the viral core has remained sparse. While major core proteins have been annotated via indirect experimental evidence, their structures have remained elusive and they could not be assigned to individual core features. Hence, which proteins constitute which layers of the core, such as the palisade layer and the inner core wall, has remained enigmatic. Here we show, using a multi-modal cryo-electron microscopy (cryo-EM) approach in combination with AlphaFold molecular modeling, that trimers formed by the cleavage product of VACV protein A10 are the key component of the palisade layer. This allows us to place previously obtained descriptions of protein interactions within the core wall into perspective and to provide a detailed model of poxvirus core architecture. Importantly, we show that interactions within A10 trimers are likely generalizable over members of orthopox- and parapoxviruses.}, author = {Datler, Julia and Hansen, Jesse and Thader, Andreas and Schlögl, Alois and Bauer, Lukas W and Hodirnau, Victor-Valentin and Schur, Florian KM}, issn = {1545-9985}, journal = {Nature Structural & Molecular Biology}, keywords = {Molecular Biology, Structural Biology}, pages = {1114--1123}, publisher = {Springer Nature}, title = {{Multi-modal cryo-EM reveals trimers of protein A10 to form the palisade layer in poxvirus cores}}, doi = {10.1038/s41594-023-01201-6}, volume = {31}, year = {2024}, } @article{15146, abstract = {The extracellular matrix (ECM) serves as a scaffold for cells and plays an essential role in regulating numerous cellular processes, including cell migration and proliferation. Due to limitations in specimen preparation for conventional room-temperature electron microscopy, we lack structural knowledge on how ECM components are secreted, remodeled, and interact with surrounding cells. We have developed a 3D-ECM platform compatible with sample thinning by cryo-focused ion beam milling, the lift-out extraction procedure, and cryo-electron tomography. Our workflow implements cell-derived matrices (CDMs) grown on EM grids, resulting in a versatile tool closely mimicking ECM environments. This allows us to visualize ECM for the first time in its hydrated, native context. Our data reveal an intricate network of extracellular fibers, their positioning relative to matrix-secreting cells, and previously unresolved structural entities. Our workflow and results add to the structural atlas of the ECM, providing novel insights into its secretion and assembly.}, author = {Zens, Bettina and Fäßler, Florian and Hansen, Jesse and Hauschild, Robert and Datler, Julia and Hodirnau, Victor-Valentin and Zheden, Vanessa and Alanko, Jonna H and Sixt, Michael K and Schur, Florian KM}, issn = {1540-8140}, journal = {Journal of Cell Biology}, number = {6}, publisher = {Rockefeller University Press}, title = {{Lift-out cryo-FIBSEM and cryo-ET reveal the ultrastructural landscape of extracellular matrix}}, doi = {10.1083/jcb.202309125}, volume = {223}, year = {2024}, } @article{12334, abstract = {Regulation of the Arp2/3 complex is required for productive nucleation of branched actin networks. An emerging aspect of regulation is the incorporation of subunit isoforms into the Arp2/3 complex. Specifically, both ArpC5 subunit isoforms, ArpC5 and ArpC5L, have been reported to fine-tune nucleation activity and branch junction stability. We have combined reverse genetics and cellular structural biology to describe how ArpC5 and ArpC5L differentially affect cell migration. Both define the structural stability of ArpC1 in branch junctions and, in turn, by determining protrusion characteristics, affect protein dynamics and actin network ultrastructure. ArpC5 isoforms also affect the positioning of members of the Ena/Vasodilator-stimulated phosphoprotein (VASP) family of actin filament elongators, which mediate ArpC5 isoform–specific effects on the actin assembly level. Our results suggest that ArpC5 and Ena/VASP proteins are part of a signaling pathway enhancing cell migration.}, author = {Fäßler, Florian and Javoor, Manjunath and Datler, Julia and Döring, Hermann and Hofer, Florian and Dimchev, Georgi A and Hodirnau, Victor-Valentin and Faix, Jan and Rottner, Klemens and Schur, Florian KM}, issn = {2375-2548}, journal = {Science Advances}, keywords = {Multidisciplinary}, number = {3}, publisher = {American Association for the Advancement of Science}, title = {{ArpC5 isoforms regulate Arp2/3 complex–dependent protrusion through differential Ena/VASP positioning}}, doi = {10.1126/sciadv.add6495}, volume = {9}, year = {2023}, } @article{12421, abstract = {The actin cytoskeleton plays a key role in cell migration and cellular morphodynamics in most eukaryotes. The ability of the actin cytoskeleton to assemble and disassemble in a spatiotemporally controlled manner allows it to form higher-order structures, which can generate forces required for a cell to explore and navigate through its environment. It is regulated not only via a complex synergistic and competitive interplay between actin-binding proteins (ABP), but also by filament biochemistry and filament geometry. The lack of structural insights into how geometry and ABPs regulate the actin cytoskeleton limits our understanding of the molecular mechanisms that define actin cytoskeleton remodeling and, in turn, impact emerging cell migration characteristics. With the advent of cryo-electron microscopy (cryo-EM) and advanced computational methods, it is now possible to define these molecular mechanisms involving actin and its interactors at both atomic and ultra-structural levels in vitro and in cellulo. In this review, we will provide an overview of the available cryo-EM methods, applicable to further our understanding of the actin cytoskeleton, specifically in the context of cell migration. We will discuss how these methods have been employed to elucidate ABP- and geometry-defined regulatory mechanisms in initiating, maintaining, and disassembling cellular actin networks in migratory protrusions.}, author = {Fäßler, Florian and Javoor, Manjunath and Schur, Florian KM}, issn = {1470-8752}, journal = {Biochemical Society Transactions}, keywords = {Biochemistry}, number = {1}, pages = {87--99}, publisher = {Portland Press}, title = {{Deciphering the molecular mechanisms of actin cytoskeleton regulation in cell migration using cryo-EM}}, doi = {10.1042/bst20220221}, volume = {51}, year = {2023}, } @article{14255, abstract = {Toscana virus is a major cause of arboviral disease in humans in the Mediterranean basin during summer. However, early virus-host cell interactions and entry mechanisms remain poorly characterized. Investigating iPSC-derived human neurons and cell lines, we found that virus binding to the cell surface was specific, and 50% of bound virions were endocytosed within 10 min. Virions entered Rab5a+ early endosomes and, subsequently, Rab7a+ and LAMP-1+ late endosomal compartments. Penetration required intact late endosomes and occurred within 30 min following internalization. Virus entry relied on vacuolar acidification, with an optimal pH for viral membrane fusion at pH 5.5. The pH threshold increased to 5.8 with longer pre-exposure of virions to the slightly acidic pH in early endosomes. Strikingly, the particles remained infectious after entering late endosomes with a pH below the fusion threshold. Overall, our study establishes Toscana virus as a late-penetrating virus and reveals an atypical use of vacuolar acidity by this virus to enter host cells.}, author = {Koch, Jana and Xin, Qilin and Obr, Martin and Schäfer, Alicia and Rolfs, Nina and Anagho, Holda A. and Kudulyte, Aiste and Woltereck, Lea and Kummer, Susann and Campos, Joaquin and Uckeley, Zina M. and Bell-Sakyi, Lesley and Kräusslich, Hans Georg and Schur, Florian Km and Acuna, Claudio and Lozach, Pierre Yves}, issn = {1553-7374}, journal = {PLoS Pathogens}, number = {8}, publisher = {Public Library of Science}, title = {{The phenuivirus Toscana virus makes an atypical use of vacuolar acidity to enter host cells}}, doi = {10.1371/journal.ppat.1011562}, volume = {19}, year = {2023}, } @misc{14502, abstract = {A precise quantitative description of the ultrastructural characteristics underlying biological mechanisms is often key to their understanding. This is particularly true for dynamic extra- and intracellular filamentous assemblies, playing a role in cell motility, cell integrity, cytokinesis, tissue formation and maintenance. For example, genetic manipulation or modulation of actin regulatory proteins frequently manifests in changes of the morphology, dynamics, and ultrastructural architecture of actin filament-rich cell peripheral structures, such as lamellipodia or filopodia. However, the observed ultrastructural effects often remain subtle and require sufficiently large datasets for appropriate quantitative analysis. The acquisition of such large datasets has been enabled by recent advances in high-throughput cryo-electron tomography (cryo-ET) methods. This also necessitates the development of complementary approaches to maximize the extraction of relevant biological information. We have developed a computational toolbox for the semi-automatic quantification of segmented and vectorized fila- mentous networks from pre-processed cryo-electron tomograms, facilitating the analysis and cross-comparison of multiple experimental conditions. GUI-based components simplify the processing of data and allow users to obtain a large number of ultrastructural parameters describing filamentous assemblies. We demonstrate the feasibility of this workflow by analyzing cryo-ET data of untreated and chemically perturbed branched actin filament networks and that of parallel actin filament arrays. In principle, the computational toolbox presented here is applicable for data analysis comprising any type of filaments in regular (i.e. parallel) or random arrangement. We show that it can ease the identification of key differences between experimental groups and facilitate the in-depth analysis of ultrastructural data in a time-efficient manner.}, author = {Dimchev, Georgi A and Amiri, Behnam and Fäßler, Florian and Falcke, Martin and Schur, Florian KM}, keywords = {cryo-electron tomography, actin cytoskeleton, toolbox}, publisher = {Institute of Science and Technology Austria}, title = {{Computational toolbox for ultrastructural quantitative analysis of filament networks in cryo-ET data}}, doi = {10.15479/AT:ISTA:14502}, year = {2023}, } @misc{14562, abstract = {Regulation of the Arp2/3 complex is required for productive nucleation of branched actin networks. An emerging aspect of regulation is the incorporation of subunit isoforms into the Arp2/3 complex. Specifically, both ArpC5 subunit isoforms, ArpC5 and ArpC5L, have been reported to fine-tune nucleation activity and branch junction stability. We have combined reverse genetics and cellular structural biology to describe how ArpC5 and ArpC5L differentially affect cell migration. Both define the structural stability of ArpC1 in branch junctions and, in turn, by determining protrusion characteristics, affect protein dynamics and actin network ultrastructure. ArpC5 isoforms also affect the positioning of members of the Ena/Vasodilator-stimulated phosphoprotein (VASP) family of actin filament elongators, which mediate ArpC5 isoform–specific effects on the actin assembly level. Our results suggest that ArpC5 and Ena/VASP proteins are part of a signaling pathway enhancing cell migration. }, author = {Schur, Florian KM}, publisher = {Institute of Science and Technology Austria}, title = {{Research data of the publication "ArpC5 isoforms regulate Arp2/3 complex-dependent protrusion through differential Ena/VASP positioning"}}, doi = {10.15479/AT:ISTA:14562}, year = {2023}, } @article{11155, abstract = {The potential of energy filtering and direct electron detection for cryo-electron microscopy (cryo-EM) has been well documented. Here, we assess the performance of recently introduced hardware for cryo-electron tomography (cryo-ET) and subtomogram averaging (STA), an increasingly popular structural determination method for complex 3D specimens. We acquired cryo-ET datasets of EIAV virus-like particles (VLPs) on two contemporary cryo-EM systems equipped with different energy filters and direct electron detectors (DED), specifically a Krios G4, equipped with a cold field emission gun (CFEG), Thermo Fisher Scientific Selectris X energy filter, and a Falcon 4 DED; and a Krios G3i, with a Schottky field emission gun (XFEG), a Gatan Bioquantum energy filter, and a K3 DED. We performed constrained cross-correlation-based STA on equally sized datasets acquired on the respective systems. The resulting EIAV CA hexamer reconstructions show that both systems perform comparably in the 4–6 Å resolution range based on Fourier-Shell correlation (FSC). In addition, by employing a recently introduced multiparticle refinement approach, we obtained a reconstruction of the EIAV CA hexamer at 2.9 Å. Our results demonstrate the potential of the new generation of energy filters and DEDs for STA, and the effects of using different processing pipelines on their STA outcomes.}, author = {Obr, Martin and Hagen, Wim J.H. and Dick, Robert A. and Yu, Lingbo and Kotecha, Abhay and Schur, Florian KM}, issn = {1047-8477}, journal = {Journal of Structural Biology}, keywords = {Structural Biology}, number = {2}, publisher = {Elsevier}, title = {{Exploring high-resolution cryo-ET and subtomogram averaging capabilities of contemporary DEDs}}, doi = {10.1016/j.jsb.2022.107852}, volume = {214}, year = {2022}, } @article{11351, abstract = {One hallmark of plant cells is their cell wall. They protect cells against the environment and high turgor and mediate morphogenesis through the dynamics of their mechanical and chemical properties. The walls are a complex polysaccharidic structure. Although their biochemical composition is well known, how the different components organize in the volume of the cell wall and interact with each other is not well understood and yet is key to the wall’s mechanical properties. To investigate the ultrastructure of the plant cell wall, we imaged the walls of onion (Allium cepa) bulbs in a near-native state via cryo-focused ion beam milling (cryo-FIB milling) and cryo-electron tomography (cryo-ET). This allowed the high-resolution visualization of cellulose fibers in situ. We reveal the coexistence of dense fiber fields bathed in a reticulated matrix we termed “meshing,” which is more abundant at the inner surface of the cell wall. The fibers adopted a regular bimodal angular distribution at all depths in the cell wall and bundled according to their orientation, creating layers within the cell wall. Concomitantly, employing homogalacturonan (HG)-specific enzymatic digestion, we observed changes in the meshing, suggesting that it is—at least in part—composed of HG pectins. We propose the following model for the construction of the abaxial epidermal primary cell wall: the cell deposits successive layers of cellulose fibers at −45° and +45° relative to the cell’s long axis and secretes the surrounding HG-rich meshing proximal to the plasma membrane, which then migrates to more distal regions of the cell wall.}, author = {Nicolas, William J. and Fäßler, Florian and Dutka, Przemysław and Schur, Florian KM and Jensen, Grant and Meyerowitz, Elliot}, issn = {0960-9822}, journal = {Current Biology}, keywords = {General Agricultural and Biological Sciences, General Biochemistry, Genetics and Molecular Biology}, number = {11}, pages = {P2375--2389}, publisher = {Elsevier}, title = {{Cryo-electron tomography of the onion cell wall shows bimodally oriented cellulose fibers and reticulated homogalacturonan networks}}, doi = {10.1016/j.cub.2022.04.024}, volume = {32}, year = {2022}, } @article{10639, abstract = {With more than 80 members worldwide, the Orthobunyavirus genus in the Peribunyaviridae family is a large genus of enveloped RNA viruses, many of which are emerging pathogens in humans and livestock. How orthobunyaviruses (OBVs) penetrate and infect mammalian host cells remains poorly characterized. Here, we investigated the entry mechanisms of the OBV Germiston (GERV). Viral particles were visualized by cryo-electron microscopy and appeared roughly spherical with an average diameter of 98 nm. Labeling of the virus with fluorescent dyes did not adversely affect its infectivity and allowed the monitoring of single particles in fixed and live cells. Using this approach, we found that endocytic internalization of bound viruses was asynchronous and occurred within 30-40 min. The virus entered Rab5a+ early endosomes and, subsequently, late endosomal vacuoles containing Rab7a but not LAMP-1. Infectious entry did not require proteolytic cleavage, and endosomal acidification was sufficient and necessary for viral fusion. Acid-activated penetration began 15-25 min after initiation of virus internalization and relied on maturation of early endosomes to late endosomes. The optimal pH for viral membrane fusion was slightly below 6.0, and penetration was hampered when the potassium influx was abolished. Overall, our study provides real-time visualization of GERV entry into host cells and demonstrates the importance of late endosomal maturation in facilitating OBV penetration.}, author = {Windhaber, Stefan and Xin, Qilin and Uckeley, Zina M. and Koch, Jana and Obr, Martin and Garnier, Céline and Luengo-Guyonnot, Catherine and Duboeuf, Maëva and Schur, Florian KM and Lozach, Pierre-Yves}, issn = {1098-5514}, journal = {Journal of Virology}, keywords = {virology, insect science, immunology, microbiology}, number = {5}, publisher = {American Society for Microbiology}, title = {{The Orthobunyavirus Germiston enters host cells from late endosomes}}, doi = {10.1128/jvi.02146-21}, volume = {96}, year = {2022}, } @article{10103, abstract = {The small cellular molecule inositol hexakisphosphate (IP6) has been known for ~20 years to promote the in vitro assembly of HIV-1 into immature virus-like particles. However, the molecular details underlying this effect have been determined only recently, with the identification of the IP6 binding site in the immature Gag lattice. IP6 also promotes formation of the mature capsid protein (CA) lattice via a second IP6 binding site, and enhances core stability, creating a favorable environment for reverse transcription. IP6 also enhances assembly of other retroviruses, from both the Lentivirus and the Alpharetrovirus genera. These findings suggest that IP6 may have a conserved function throughout the family Retroviridae. Here, we discuss the different steps in the viral life cycle that are influenced by IP6, and describe in detail how IP6 interacts with the immature and mature lattices of different retroviruses.}, author = {Obr, Martin and Schur, Florian KM and Dick, Robert A.}, issn = {1999-4915}, journal = {Viruses}, keywords = {virology, infectious diseases}, number = {9}, publisher = {MDPI}, title = {{A structural perspective of the role of IP6 in immature and mature retroviral assembly}}, doi = {10.3390/v13091853}, volume = {13}, year = {2021}, } @article{10290, abstract = {A precise quantitative description of the ultrastructural characteristics underlying biological mechanisms is often key to their understanding. This is particularly true for dynamic extra- and intracellular filamentous assemblies, playing a role in cell motility, cell integrity, cytokinesis, tissue formation and maintenance. For example, genetic manipulation or modulation of actin regulatory proteins frequently manifests in changes of the morphology, dynamics, and ultrastructural architecture of actin filament-rich cell peripheral structures, such as lamellipodia or filopodia. However, the observed ultrastructural effects often remain subtle and require sufficiently large datasets for appropriate quantitative analysis. The acquisition of such large datasets has been enabled by recent advances in high-throughput cryo-electron tomography (cryo-ET) methods. This also necessitates the development of complementary approaches to maximize the extraction of relevant biological information. We have developed a computational toolbox for the semi-automatic quantification of segmented and vectorized filamentous networks from pre-processed cryo-electron tomograms, facilitating the analysis and cross-comparison of multiple experimental conditions. GUI-based components simplify the processing of data and allow users to obtain a large number of ultrastructural parameters describing filamentous assemblies. We demonstrate the feasibility of this workflow by analyzing cryo-ET data of untreated and chemically perturbed branched actin filament networks and that of parallel actin filament arrays. In principle, the computational toolbox presented here is applicable for data analysis comprising any type of filaments in regular (i.e. parallel) or random arrangement. We show that it can ease the identification of key differences between experimental groups and facilitate the in-depth analysis of ultrastructural data in a time-efficient manner.}, author = {Dimchev, Georgi A and Amiri, Behnam and Fäßler, Florian and Falcke, Martin and Schur, Florian KM}, issn = {1047-8477}, journal = {Journal of Structural Biology}, keywords = {Structural Biology}, number = {4}, publisher = {Elsevier }, title = {{Computational toolbox for ultrastructural quantitative analysis of filament networks in cryo-ET data}}, doi = {10.1016/j.jsb.2021.107808}, volume = {213}, year = {2021}, } @article{9431, abstract = {Inositol hexakisphosphate (IP6) is an assembly cofactor for HIV-1. We report here that IP6 is also used for assembly of Rous sarcoma virus (RSV), a retrovirus from a different genus. IP6 is ~100-fold more potent at promoting RSV mature capsid protein (CA) assembly than observed for HIV-1 and removal of IP6 in cells reduces infectivity by 100-fold. Here, visualized by cryo-electron tomography and subtomogram averaging, mature capsid-like particles show an IP6-like density in the CA hexamer, coordinated by rings of six lysines and six arginines. Phosphate and IP6 have opposing effects on CA in vitro assembly, inducing formation of T = 1 icosahedrons and tubes, respectively, implying that phosphate promotes pentamer and IP6 hexamer formation. Subtomogram averaging and classification optimized for analysis of pleomorphic retrovirus particles reveal that the heterogeneity of mature RSV CA polyhedrons results from an unexpected, intrinsic CA hexamer flexibility. In contrast, the CA pentamer forms rigid units organizing the local architecture. These different features of hexamers and pentamers determine the structural mechanism to form CA polyhedrons of variable shape in mature RSV particles.}, author = {Obr, Martin and Ricana, Clifton L. and Nikulin, Nadia and Feathers, Jon-Philip R. and Klanschnig, Marco and Thader, Andreas and Johnson, Marc C. and Vogt, Volker M. and Schur, Florian KM and Dick, Robert A.}, issn = {2041-1723}, journal = {Nature Communications}, keywords = {General Biochemistry, Genetics and Molecular Biology, General Physics and Astronomy, General Chemistry}, number = {1}, publisher = {Nature Research}, title = {{Structure of the mature Rous sarcoma virus lattice reveals a role for IP6 in the formation of the capsid hexamer}}, doi = {10.1038/s41467-021-23506-0}, volume = {12}, year = {2021}, } @article{9429, abstract = {De novo loss of function mutations in the ubiquitin ligase-encoding gene Cullin3 lead to autism spectrum disorder (ASD). In mouse, constitutive haploinsufficiency leads to motor coordination deficits as well as ASD-relevant social and cognitive impairments. However, induction of Cul3 haploinsufficiency later in life does not lead to ASD-relevant behaviors, pointing to an important role of Cul3 during a critical developmental window. Here we show that Cul3 is essential to regulate neuronal migration and, therefore, constitutive Cul3 heterozygous mutant mice display cortical lamination abnormalities. At the molecular level, we found that Cul3 controls neuronal migration by tightly regulating the amount of Plastin3 (Pls3), a previously unrecognized player of neural migration. Furthermore, we found that Pls3 cell-autonomously regulates cell migration by regulating actin cytoskeleton organization, and its levels are inversely proportional to neural migration speed. Finally, we provide evidence that cellular phenotypes associated with autism-linked gene haploinsufficiency can be rescued by transcriptional activation of the intact allele in vitro, offering a proof of concept for a potential therapeutic approach for ASDs.}, author = {Morandell, Jasmin and Schwarz, Lena A and Basilico, Bernadette and Tasciyan, Saren and Dimchev, Georgi A and Nicolas, Armel and Sommer, Christoph M and Kreuzinger, Caroline and Dotter, Christoph and Knaus, Lisa and Dobler, Zoe and Cacci, Emanuele and Schur, Florian KM and Danzl, Johann G and Novarino, Gaia}, issn = {2041-1723}, journal = {Nature Communications}, keywords = {General Biochemistry, Genetics and Molecular Biology}, number = {1}, publisher = {Springer Nature}, title = {{Cul3 regulates cytoskeleton protein homeostasis and cell migration during a critical window of brain development}}, doi = {10.1038/s41467-021-23123-x}, volume = {12}, year = {2021}, } @misc{14592, abstract = {Cryo-electron microscopy (cryo-EM) of cellular specimens provides insights into biological processes and structures within a native context. However, a major challenge still lies in the efficient and reproducible preparation of adherent cells for subsequent cryo-EM analysis. This is due to the sensitivity of many cellular specimens to the varying seeding and culturing conditions required for EM experiments, the often limited amount of cellular material and also the fragility of EM grids and their substrate. Here, we present low-cost and reusable 3D printed grid holders, designed to improve specimen preparation when culturing challenging cellular samples directly on grids. The described grid holders increase cell culture reproducibility and throughput, and reduce the resources required for cell culturing. We show that grid holders can be integrated into various cryo-EM workflows, including micro-patterning approaches to control cell seeding on grids, and for generating samples for cryo-focused ion beam milling and cryo-electron tomography experiments. Their adaptable design allows for the generation of specialized grid holders customized to a large variety of applications.}, author = {Schur, Florian KM}, publisher = {Institute of Science and Technology Austria}, title = {{STL-files for 3D-printed grid holders described in Fäßler F, Zens B, et al.; 3D printed cell culture grid holders for improved cellular specimen preparation in cryo-electron microscopy}}, doi = {10.15479/AT:ISTA:14592}, year = {2020}, } @article{15286, author = {Fäßler, Florian and Dimchev, Georgi A and Hodirnau, Victor-Valentin and Zens, Bettina and Möhl, Christoph and Bradke, Frank and Schur, Florian KM}, issn = {1435-8115}, journal = {Microscopy and Microanalysis}, keywords = {Instrumentation}, number = {S2}, pages = {2518--2519}, publisher = {Oxford University Press}, title = {{Cryo-electron tomography workflows for quantitative analysis of actin networks involved in cell migration}}, doi = {10.1017/s1431927620021881}, volume = {26}, year = {2020}, }