@article{21532,
  abstract     = {Recent research in nanophotonics for scintillation-based imaging has demonstrated promising improvements in scintillator performance. In parallel, advances in nanophotonics have enabled wavefront control through metasurfaces, a capability that has transformed fields such as microscopy by allowing tailored control of optical propagation. This naturally raises the following question, which we address in this Perspective: can wavefront-control strategies be leveraged to improve scintillation-based imaging? To answer this question, we explore nanophotonic- and metasurface-enabled wavefront control in scintillators to mitigate image blurring arising from their intrinsically diffuse light emission. While depth-of-field extension in scintillation faces fundamental limitations absent in microscopy, this approach reveals promising avenues, including stacked scintillators, selective spatial-frequency enhancement, and X-ray energy-dependent imaging. These results clarify the key distinctions in adapting wavefront engineering to scintillation and its potential to enable tailored detection strategies.},
  author       = {Chen, Joshua and Vaidya, Sachin and Pajovic, Simo and Choi, Seou and Michaels, William and Martin-Monier, Louis and Hu, Juejun and Cogswell, Carol and Roques-Carmes, Charles and Soljačić, Marin},
  issn         = {2330-4022},
  journal      = {ACS Photonics},
  number       = {7},
  pages        = {1757–1766},
  publisher    = {American Chemical Society},
  title        = {{Wavefront engineering for scintillation-based imaging}},
  doi          = {10.1021/acsphotonics.5c03124},
  volume       = {13},
  year         = {2026},
}

@article{21537,
  abstract     = {Nanophotonics has revolutionized the control of light-matter interactions in various fields of fundamental science and technology. In this work, we propose Implosion Fabrication (ImpFab) as a versatile nanophotonics fabrication platform providing the highest spatial resolution, material versatility, and full volumetric control. ImpFab uniquely combines top-down lithography with bottom-up nanoparticle assembly within a hydrogel scaffold, enabling precise control over optical material properties, such as refractive index, by adjusting printing parameters. We showcase the potential of ImpFab by fabricating three-dimensional photonic crystals and quasicrystals, as well as demonstrating optical structures with spatially modulated unit cell material properties. Our results highlight the potential of ImpFab in producing nanostructures with tailored optical functionalities, which are crucial for applications in sensing, imaging, and information processing, and opening new avenues in developing non-Hermitian photonic systems with spatially controlled gain and loss.},
  author       = {Salamin, Yannick and Yang, Gaojie and Mills, Brian and Grossi Fonseca, André and Roques-Carmes, Charles and Yang, Quansan and Beroz, Justin and Kooi, Steven E. and de Miguel Comella, Marc and Mak, Kiran and Vaidya, Sachin and Oran, Daniel and Swain, Corban and Sun, Yi and Maayani, Shai and Sloan, Jamison and Amin Elfadil Elawad, Amel and Lopez, Josue J. and Boyden, Edward S. and Soljačić, Marin},
  issn         = {2047-7538},
  journal      = {Light: Science & Applications},
  publisher    = {Springer Nature},
  title        = {{Three-dimensional nanophotonics with spatially modulated optical properties}},
  doi          = {10.1038/s41377-025-02166-5},
  volume       = {15},
  year         = {2026},
}

@article{21555,
  abstract     = {Spin-polarized electron beam sources enable studies of spin-dependent electric and magnetic effects at the nanoscale. We propose a method of creating spin-polarized electrons on an integrated photonics chip by laser-driven nanophotonic fields. A two-stage interaction separated by a free-space drift length is proposed, where the first stage and drift length introduces spin-dependent characteristics into the probability distribution of the electron wave function. The second stage uses an adjusted optical near field to rotate the spin states utilizing the spin-dependent wave-packet distribution to produce electrons with high ensemble average spin expectation values. This platform provides an integrated and compact method to generate spin-polarized electrons, implementable with millimeter scale chips and tabletop lasers.},
  author       = {Woodahl, Clarisse and Murillo, Melanie and Roques-Carmes, Charles and Karnieli, Aviv and Miller, David A. B. and Solgaard, Olav},
  issn         = {1079-7114},
  journal      = {Physical Review Letters},
  number       = {6},
  publisher    = {American Physical Society},
  title        = {{On-chip laser-driven free-electron spin polarizer}},
  doi          = {10.1103/3c1m-d3hh},
  volume       = {136},
  year         = {2026},
}

@inproceedings{21581,
  abstract     = {We demonstrate that nanophotonic scintillators based on three-dimensional (3D) photonic crystals can overcome the longstanding tradeoff between spatial resolution and light yield in X-ray imaging. By engineering supercollimation, which is light propagation without angular spreading, within the emission spectrum, we strongly shape the angular emission profile of the scintillator, dramatically reducing blurring at large thicknesses. Our theoretical and numerical results, using realistic scintillator and photonic crystal parameters, show that this improves the Detector Quantum Efficiency (DQE) by up to several orders of magnitude at high spatial frequencies, enabling sharper images and reduced X-ray dosages. This approach offers a new path toward high-resolution, low-dose X-ray imaging systems.},
  author       = {Vaidya, Sachin and Choi, Seou and Roques-Carmes, Charles and Soljačić, Marin},
  booktitle    = {High Contrast Metastructures XV},
  location     = {San Francisco, CA, United States},
  publisher    = {SPIE},
  title        = {{Supercollimating photonic crystal scintillators}},
  doi          = {10.1117/12.3079431},
  volume       = {PC13910},
  year         = {2026},
}

@article{21583,
  abstract     = {Non-Hermiticity naturally arises in physical systems that exchange energy with their environment. The presence of non-Hermiticity leads to many topological physics phenomena and device applications. In the non-Hermitian energy band theory, the foundation of these physics and applications, both energies and wave vectors take complex values. The energy bands thus become a Riemann surface, and such an energy-band Riemann surface underlies all important signatures of non-Hermitian topology. Despite a long history and recent theoretical interests, the energy-band Riemann surface has not been experimentally studied. Here, we provide a photonic observation of the energy-band Riemann surface of a non-Hermitian system. This is achieved by a tunable imaginary gauge transformation in photonic synthetic frequency dimensions. From measured topologies of the Riemann surface, we reveal the complex-energy winding, the open-boundary-condition spectrum, the generalized Brillouin zone, and the branch points. Our findings demonstrate a unified framework in the studies of diverse effects in non-Hermitian topological physics through an experimental observation of energy-band Riemann surfaces.},
  author       = {Cheng, Dali and Wang, Heming and Zhong, Janet and Lustig, Eran and Roques-Carmes, Charles and Fan, Shanhui},
  issn         = {2375-2548},
  journal      = {Science Advances},
  number       = {12},
  publisher    = {American Association for the Advancement of Science},
  title        = {{Experimental observation of energy-band Riemann surface}},
  doi          = {10.1126/sciadv.aec8239},
  volume       = {12},
  year         = {2026},
}

@unpublished{21699,
  abstract     = {Recent research in nanophotonics for scintillation-based imaging has demonstrated promising improvements in scintillator performance. In parallel, advances in nanophotonics have enabled wavefront control through metasurfaces, a capability that has transformed fields such as microscopy by allowing tailored control of optical propagation. This naturally raises the following question, which we address in this perspective: can wavefront-control strategies be leveraged to improve scintillation-based imaging? To answer this question, we explore nanophotonic- and metasurface-enabled wavefront control in scintillators to mitigate image blurring arising from their intrinsically diffuse light emission. While depth-of-field extension in scintillation faces fundamental limitations absent in microscopy, this approach reveals promising avenues, including stacked scintillators, selective spatial-frequency enhancement, and X-ray energy-dependent imaging. These results clarify the key distinctions in adapting wavefront engineering to scintillation and its potential to enable tailored detection strategies.},
  author       = {Chen, Joshua and Vaidya, Sachin and Pajovic, Simo and Choi, Seou and Michaels, William and Louis Martin-Monier, Louis Martin-Monier and Hu, Juejun and Cogswell, Carol and Roques-Carmes, Charles and Soljačić, Marin},
  booktitle    = {arXiv},
  title        = {{Wavefront engineering for scintillation-based imaging}},
  doi          = {10.48550/arXiv.2601.09830},
  year         = {2026},
}

@unpublished{21700,
  abstract     = {We provide a theoretical framework to describe the dynamics of a free-electron beam interacting with quantized bound systems in arbitrary electromagnetic environments. This expands the quantum optics toolbox to incorporate free-electron beams for applications in highly tunable quantum control, imaging, and spectroscopy at the nanoscale. The framework recovers previously studied results and shows that electromagnetic environments can amplify the intrinsically weak coupling between a free-electron and a bound electron to reach previously inaccessible interaction regimes. We leverage this enhanced coupling for experimentally feasible protocols in coherent qubit control and towards the nondestructive readout and projective control of the electron beam's quantum-number statistics. Our framework is broadly applicable to microwave-frequency qubits, optical nanophotonics, cavity quantum electrodynamics, and emerging platforms at the interface of electron microscopy and quantum information.},
  author       = {Grzesik, Jakob M. and Karnieli, Aviv and Roques-Carmes, Charles and Black, Dylan S. and Lê, Trung Kiên and Solgaard, Olav and Fan, Shanhui and Vučković, Jelena},
  booktitle    = {arXiv},
  title        = {{A general framework for interactions between electron beams and quantum optical systems}},
  doi          = {10.48550/arXiv.2601.21385},
  year         = {2026},
}

@unpublished{21701,
  abstract     = {Polarization-resolved control and measurement of the optical field are essential for a wide range of photonic systems, including coherent communication, polarimetric sensing, and quantum information processing. We present a photonic integrated circuit that enables the generation and analysis of arbitrary polarization states. The device provides reconfigurable access to the full polarization degree of freedom of coherent light within a single integrated platform. We experimentally demonstrate arbitrary polarization state generation spanning the Poincare sphere, as well as Stokes vector measurement on chip. Unlike conventional Stokes measurements that rely on direct detection, polarization analysis utilizing this architecture is intrinsically non-destructive, preserving the optical signal for further optical domain processing. The devices are fabricated in a commercial foundry using CMOS-compatible processes, enabling scalable and reproducible integration. By combining polarization generation and analysis in a compact and stable photonic circuit, this work eliminates the need for external polarization optics and provides a foundation for robust, polarization-enabled photonic integrated systems.},
  author       = {Valdez, Carson G. and Kroo, Anne R. and Miller, Anna J. and Roques-Carmes, Charles and Miller, David A. B. and Solgaard, Olav},
  booktitle    = {arXiv},
  title        = {{Integrated photonic polarization synthesizer and analyzer}},
  doi          = {10.48550/arXiv.2602.17024},
  year         = {2026},
}

@article{21798,
  abstract     = {Phase singularities—points carrying quantized topological charge—are universal features found across diverse wave systems from superfluids and superconductors to acoustic and optical fields1,2,3,4. Ensembles of these singularities exhibit distance correlations resembling particles in liquids5,6,7,8, extensively studied for their role in exotic material phases9,10,11. By contrast, the full correlations in phase space that govern the system evolution have remained unexplored and experimentally inaccessible. Here we directly measure the ultrafast dynamics of optical singularity ensembles, capturing their full phase-space correlations, presenting the joint distance–velocity distribution. Our observations show a breakdown of the particle-singularity analogy12: phase singularities accelerate towards formally divergent velocities in the moment before annihilation7,13,14, indicated by measurements of velocities exceeding the speed of light. These apparent superluminal velocities are paradoxically amplified by the slow group velocity of hyperbolic phonon polaritons in our material platform, hexagonal boron nitride membranes15,16,17,18,19. We demonstrate these phenomena using combined hardware and algorithmic advances in ultrafast electron microscopy18,20,21,22,23,24,25, achieving spatial and temporal resolutions, each an order of magnitude below the polaritonic wavelength and cycle period. Our findings deepen our understanding of phase singularities and their universality, enabling to probe topological defect dynamics at previously unattainable timescales.},
  author       = {Bucher, T. and Gorlach, A. and Niedermayr, A. and Yan, Q. and Nahari, H. and Wang, K. and Ruimy, R. and Adiv, Y. and Yannai, M. and Abudi, T. L. and Janzen, E. and Spaegele, C. and Roques-Carmes, Charles and Edgar, J. H. and Koppens, F. H. L. and Vanacore, G. M. and H. Sheinfux, H. and Tsesses, S. and Kaminer, I.},
  issn         = {1476-4687},
  journal      = {Nature},
  number       = {8107},
  pages        = {920--926},
  publisher    = {Springer Nature},
  title        = {{Superluminal correlations in ensembles of optical phase singularities}},
  doi          = {10.1038/s41586-026-10209-z},
  volume       = {651},
  year         = {2026},
}

@inproceedings{23197,
  abstract     = {We develop a quantum theory of light-matter interactions in 229Th nanophotonic resonators pumped via the optonuclear quadrupolar effect, predicting detectable photon fluxes with realistic platforms and revealing how collective dynamics shape the future nuclear clock performance.},
  author       = {Mamian, Karen and De Haan, Jan and Bi, Toby and Dubey, Swadheen and Kazakov, Georgy A. and Beeks, Kjeld and Marquardt, Christoph and Kraemer, Sandro and Pereira, Lino M.C. and Del’Haye, Pascal and Van Gasse, Kasper and Schumm, Thorsten and Roques-Carmes, Charles},
  booktitle    = {CLEO Fundamental Science Proceedings},
  isbn         = {9781957171586},
  location     = {Long Beach, CA, United States},
  publisher    = {Optica Publishing Group},
  title        = {{Collective optonuclear cavity quantum electrodynamics in 229Th nanophotonic resonators}},
  doi          = {10.1364/CLEO_FS.2026.FTU1B.4},
  year         = {2026},
}

@inproceedings{23196,
  abstract     = {We introduce an experimental realization of the measurement, processing, and generation of partially coherent light on a photonic chip. This device relies on self-configuring networks optimized sequentially to learn the coherency matrix of input light.},
  author       = {Mor, Paul Alexis and Kroo, Annie R. and Valdez, Carson G. and Šimić, Marko and Karnieli, Aviv and Cavicchioli, Gabriele and Sun, Zhanghao and Grimaldi, Vittorio and Fan, Shanhui and Solgaard, Olav and Miller, David A.B. and Roques-Carmes, Charles},
  booktitle    = {CLEO Science and Innovations Proceedings},
  isbn         = {9781957171586},
  location     = {Long Beach, CA, United States},
  publisher    = {Optica Publishing Group},
  title        = {{Variational processing of partially coherent light in a photonic integrated circuit}},
  doi          = {10.1364/CLEO_SI.2026.STU2F.1},
  year         = {2026},
}

@article{23241,
  abstract     = {While partial coherence often degrades interference and information transfer, its correlations can be engineered to enhance imaging and optical information processing. However, approaches based on tomography and numerical reconstruction do not physically separate unknown fields into their coherence modes—that is, their orthogonal and mutually incoherent components. Here we demonstrate the separation of partially coherent light into coherence modes. We use variational processing in layered self-configuring interferometers on a silicon photonic circuit. This process finds the eigenvectors and eigenvalues of the coherency matrix, characterizing the state while leaving it intact and separated after optimization. We show that spatially orthogonal, mutually incoherent beams can be routed to separate outputs even when their intensity profiles overlap. Our experiment separates the two strongest coherence modes from a nine-input sampling of overlapping fields from two independent lasers; operation beyond two modes is verified in a rank-3 experiment. The number of physical components scales linearly with the rank r of the coherency matrix, through r in situ gradient-based optimizations enabled by electronic drive-frequency multiplexing of the phase shifters. We benchmark performance against an on-chip mixture-based tomographic method. These results establish a scalable framework for programmable coherence analysis and control.},
  author       = {Mor, Paul-Alexis and Kroo, Anne R. and Valdez, Carson G. and Šimić, Marko and Karnieli, Aviv and Cavicchioli, Gabriele and Sun, Zhanghao and Grimaldi, Vittorio and Fan, Shanhui and Solgaard, Olav and Miller, David A.B. and Roques-Carmes, Charles},
  issn         = {1749-4893},
  journal      = {Nature Photonics},
  publisher    = {Springer Nature},
  title        = {{Automatic on-chip separation of partially coherent light into its mutually incoherent components}},
  doi          = {10.1038/s41566-026-02035-6},
  year         = {2026},
}

@article{23277,
  abstract     = {Topological quasiparticles of light, such as classical and quantum optical skyrmions, have so far relied on fully coherent or pure quantum states whose topology is encoded in the entanglement between polarization and two-dimensional spatial modes. Here, we show that skyrmionic topology can emerge directly within the density matrix of a mixed quantum state. We introduce a framework in which a coherence-Stokes vector defines a topological texture over the density matrix, enabling the realization of quantum skyrmions using only a pseudospin and a real or synthetic one-dimensional space of modes. For a single photon, the density matrix is analogous to the coherence matrix of classical light and can be encoded using partially coherent electromagnetic fields. We further analyze the topological texture encoded in a bipartite entangled photon pair, showing how skyrmions arise not only in the full biphoton system but also in its reduced subspaces with any pseudospin-mode combination simultaneously. We then explore the robustness of such skyrmions to environmental noise and discover their persistence in mixed-quantum states of multiple photons. Finally, we propose a feasible experimental route to generate and measure such skyrmions using integrated photonic networks and suggest avenues for similar implementations in other quantum systems. Our work paves the way for robustly encoding classical information on partially coherent light or on mixed quantum states and for encoding topological charges on many-body quantum systems.},
  author       = {Kam, Amit and Roques-Carmes, Charles and Tsesses, Shai and Karnieli, Aviv},
  issn         = {2330-4022},
  journal      = {ACS Photonics},
  keywords     = {quantum optical skyrmions, partially coherent light, mixed quantum states, quantum coherence, quantum state engineering, multipartite entanglement},
  number       = {18},
  pages        = {5425--5433},
  publisher    = {American Chemical Society},
  title        = {{Quantum skyrmions in mixed states of light and their nested topology}},
  doi          = {10.1021/acsphotonics.6c01382},
  volume       = {13},
  year         = {2026},
}

@article{21515,
  abstract     = {The property of a physical system is highly dependent on its dimensionality. Topological physics in three or more dimensions exhibits rich phenomena without lower-dimensional counterparts. In this paper, the authors propose a scheme to implement such high-dimensional topological physics in a single photonic ring resonator, where the model of interest can be arbitrarily high dimensional and arbitrarily multi-band. The frequency modes in the resonator, coupled via electro-optic modulation, are used to create a high-dimensional lattice, and the spatial modes are used as the pseudo-spin degree of freedom within each lattice site. The band structure of the model can be measured from the transmission spectrum of the ring resonator. The authors numerically demonstrate as examples a three-dimensional, two-band model and a five-dimensional, four-band model. This paper establishes a versatile and programmable platform for high-dimensional topological physics, paving the way for its experimental studies and future applications.},
  author       = {Cheng, Dali and Wang, Heming and Roques-Carmes, Charles and Zhong, Janet and Fan, Shanhui},
  issn         = {2950-6360},
  journal      = {Newton},
  number       = {7},
  publisher    = {Elsevier},
  title        = {{Creating high-dimensional topological physics using a single ring resonator}},
  doi          = {10.1016/j.newton.2025.100163},
  volume       = {1},
  year         = {2025},
}

@article{21521,
  abstract     = {Fast-emitting scintillators are essential for advanced diagnostic techniques, yet many suffer from low radiation attenuation. This trade-off is particularly pronounced in polymer scintillators, which, despite their fast emission, exhibit low density and low atomic numbers, limiting the radiation attenuation factor, resulting in low detection efficiency. Here, we overcome this limitation by creating a heterostructure scintillator of alternating nanometric layers, combining fast light-emitting polymer scintillator layers and transparent stopping layers with a high radiation attenuation factor. The nanolayer thicknesses are tuned to optimize the penetration depth of recoil electrons in active emissive layers, maximizing the conversion of X-rays to visible light. This design increases light output by up to 1.5 times and enhances imaging resolution by a factor of 2 compared to homogeneous polymer scintillators due to the ability to use thinner samples. These results demonstrate the potential of heterostructure scintillators as next-generation detector materials, overcoming the limitations of homogeneous scintillators.},
  author       = {Be’er, Orr and Shultzman, Avner and Strassberg, Rotem and Dosovitskiy, Georgy and Veber, Noam and Schuetz, Roman and Roques-Carmes, Charles and Kaminer, Ido and Bekenstein, Yehonadav},
  issn         = {1530-6992},
  journal      = {Nano Letters},
  keywords     = {Scintillator, Heterostructure, Thin film, X-ray imaging, X-ray detector},
  number       = {9},
  pages        = {3422--3429},
  publisher    = {American Chemical Society},
  title        = {{Heterostructure nanoscintillator for matching radiation absorbing layers with fast light-emitting layers}},
  doi          = {10.1021/acs.nanolett.4c05353},
  volume       = {25},
  year         = {2025},
}

@article{21524,
  abstract     = {In X-ray tubes, more than 99% of the kilowatts of power supplied to generate X-rays via bremsstrahlung is lost as heat in the anode. Therefore, thermal management is a critical barrier to the development of more powerful X-ray tubes with higher brightness and spatial coherence, which are needed to translate imaging modalities such as phase-contrast imaging to the clinic. In rotating anode X-ray tubes, the most common design, thermal radiation is a bottleneck that prevents efficient cooling of the anode─the hottest part of the device by far. We predict that nanophotonic patterning of the anode of an X-ray tube enhances heat dissipation via thermal radiation, enabling it to operate at higher powers without an increase in temperature. The focal spot size, which is related to the spatial coherence of generated X-rays, can also be reduced at a constant temperature. A major advantage of our “nanophotonic thermal management” approach is that in principle, it allows complete control over the spectrum and direction of thermal radiation, which can lead to optimal thermal routing and improved performance.},
  author       = {Pajovic, Simo and Roques-Carmes, Charles and Choi, Seou and Kooi, Steven E. and Gupta, Rajiv and Zalis, Michael E. and Čelanović, Ivan and Soljačić, Marin},
  issn         = {1936-086X},
  journal      = {ACS Nano},
  keywords     = {X-ray tubes, thermal management, nanophotonics, thermal radiation, X-ray imaging, high-temperature},
  number       = {35},
  pages        = {31363--31370},
  publisher    = {American Chemical Society},
  title        = {{Nanophotonic thermal management in X-ray tubes}},
  doi          = {10.1021/acsnano.5c05186},
  volume       = {19},
  year         = {2025},
}

@article{21530,
  abstract     = {Metasurfaces, ultrathin structures composed of subwavelength optical elements, have revolutionized light manipulation by enabling precise control over electromagnetic waves’ amplitude, phase, polarization, and spectral properties. Concurrently, computational imaging leverages algorithms to reconstruct images from optically processed signals, overcoming the limitations of traditional imaging systems. This Perspective explores the synergistic integration of metaoptics and computational imaging, “metaoptic computational imaging”, which combines the physical wavefront shaping ability of metasurfaces with advanced computational algorithms to enhance imaging performance beyond conventional limits. We discuss how metaoptic computational imaging addresses the inherent limitations of single-layer metasurfaces in achieving multifunctionality without compromising efficiency. By treating metasurfaces as physical preconditioners and codesigning them with reconstruction algorithms through end-to-end (inverse) design, it is possible to jointly optimize the optical hardware and computational software. Advanced applications and new frontiers in the field enabled by metaoptic computational imaging are highlighted, including phase imaging and quantum state measurement.},
  author       = {Roques-Carmes, Charles and Wang, Kai and Yang, Yuanmu and Majumdar, Arka and Lin, Zin},
  issn         = {2330-4022},
  journal      = {ACS Photonics},
  keywords     = {nanophotonics, metasurfaces, computational imaging, inverse design},
  number       = {4},
  pages        = {1722--1733},
  publisher    = {American Chemical Society},
  title        = {{Metaoptic computational imaging}},
  doi          = {10.1021/acsphotonics.4c02266},
  volume       = {12},
  year         = {2025},
}

@article{21531,
  abstract     = {Entanglement is a unique feature of quantum mechanics. In coupled systems of light and matter, entanglement manifests itself in the linear superposition of multipartite quantum states (e.g., parametrized by the multiple spatial, spectral, or temporal degrees of freedom of a light field). In bipartite systems, the Schmidt decomposition provides a modal decomposition of the entanglement structure over independent, separable states. Although ubiquitous as a mathematical tool to describe and measure entanglement, there exists no general efficient experimental method to decompose a bipartite quantum state onto its Schmidt modes. Here, we propose a method that relies on bipartite self-configuring optics that automatically ``learns'' the Schmidt decomposition of an arbitrary pure quantum state. Our method is agnostic to the degrees of freedom over which quantum entanglement is distributed and can reconstruct the Schmidt modes and values by variational optimization of the network's output powers or coincidences. We illustrate our method with numerical examples of spectral entanglement analysis for biphotons generated via spontaneous parametric down conversion and provide experimental guidelines for its realization, including the influence of losses and impurities. Our method provides a versatile and scalable way of analyzing entanglement in bipartite integrated quantum photonic systems. },
  author       = {Roques-Carmes, Charles and Karnieli, Aviv and Miller, David A. B. and Fan, Shanhui},
  issn         = {2330-4022},
  journal      = {ACS Photonics},
  keywords     = {integrated photonics, spontaneous parametric down conversion, entanglement, quantum teleportation, reconfigurable optics},
  number       = {6},
  pages        = {3285--3294},
  publisher    = {American Chemical Society},
  title        = {{Automated modal analysis of entanglement with bipartite self-configuring optics}},
  doi          = {10.1021/acsphotonics.5c00813},
  volume       = {12},
  year         = {2025},
}

@article{21536,
  abstract     = {Scintillators have been widely used in X-ray imaging due to their ability to convert high-energy radiation into visible light, making them essential for applications such as medical imaging and high-energy physics. Recent advances in the artificial structuring of scintillators offer new opportunities for improving the energy resolution of scintillator-based X-ray detectors. Here, we present a three-bin energy-resolved X-ray imaging framework based on a three-layer multicolor scintillator used in conjunction with a physics-aware image postprocessing algorithm. The multicolor scintillator is able to preserve X-ray energy information through the combination of emission wavelength multiplexing and energy-dependent isolation of X-ray absorption in specific layers. The dominant emission color and the radius of the spot measured by the detector are used to infer the incident X-ray energy based on prior knowledge of the energy-dependent absorption profiles of the scintillator stack. Through ab initio Monte Carlo simulations, we show that our approach can achieve an energy reconstruction accuracy of 49.7%, which is only 2% below the maximum accuracy achievable with realistic scintillators. We apply our framework to medical phantom imaging simulations where we demonstrate that it can effectively differentiate iodine and gadolinium-based contrast agents from bone, muscle, and soft tissue.},
  author       = {Min, Seokhwan and Choi, Seou and Pajovic, Simo and Vaidya, Sachin and Rivera, Nicholas and Fan, Shanhui and Soljačić, Marin and Roques-Carmes, Charles},
  issn         = {2047-7538},
  journal      = {Light: Science & Applications},
  publisher    = {Springer Nature},
  title        = {{End-to-end design of multicolor scintillators for enhanced energy resolution in X-ray imaging}},
  doi          = {10.1038/s41377-025-01836-8},
  volume       = {14},
  year         = {2025},
}

@article{21541,
  abstract     = {Scintillators convert X-ray energy into visible light and are critical for imaging technologies. Their widespread use relies on scalable, high-quality manufacturing methods. Nanophotonic scintillators, featuring wavelength-scale nanostructures, can offer improved emission properties such as higher light yield, shorter decay times, and enhanced directionality. However, achieving scalable fabrication of these structures remains challenging. Here, we present a scalable fabrication method for large-area nanophotonic scintillators based on the self-assembly of chalcogenide glass photonic crystals. This technique enables the production of nanophotonic scintillators over wafer-scale areas, achieving a six-fold enhancement in light yield compared to unpatterned scintillators. By studying surface nanofabrication disorder, we show its impact on imaging performance and provide a route towards scintillation enhancements without compromising resolution. We demonstrate the practical applicability of our nanophotonic scintillators through X-ray imaging of biological and inorganic specimens. Our results could enable the industrial implementation of a new generation of nanophotonic-enhanced scintillators.},
  author       = {Martin-Monier, Louis and Pajovic, Simo and Abebe, Muluneh G. and Chen, Joshua and Vaidya, Sachin and Min, Seokhwan and Choi, Seou and Kooi, Steven E. and Maes, Bjorn and Hu, Juejun and Soljačić, Marin and Roques-Carmes, Charles},
  issn         = {2041-1723},
  journal      = {Nature Communications},
  publisher    = {Springer Nature},
  title        = {{Large-scale self-assembled nanophotonic scintillators for X-ray imaging}},
  doi          = {10.1038/s41467-025-60953-5},
  volume       = {16},
  year         = {2025},
}

