@phdthesis{20415,
  abstract     = {Well-defined powder precursors are important for the rational design of crystalline inorganic 
materials with controlled defects and functional properties. Such powders can be prepared from 
dried nanoparticles synthesized using a surfactant-assisted/colloidal method that provides 
precise control over size, shape, composition, and surface chemistry of nanoparticles. These 
tailored nanoparticles further act as building blocks for three-dimensional assemblies, 
exhibiting collective nanoscale properties and enabling tailored microstructures of crystalline 
inorganic materials. However, the programmable engineering of such materials using 
nanoparticle-based precursors remains limited, due to a lack of fundamental understanding of 
both the synthesis of nanoparticles and their conversion into macroscopic solids. Furthermore, 
the formation of three-dimensional assemblies often requires multi-step post-synthetic 
treatments, which can limit reproducibility and the production of the bulk inorganic materials. 
In this thesis, I demonstrate a key synthetic parameter governing the formation of desired 
nanostructures, especially metal/semiconductor core–shell nanoparticles which are potential 
precursors for engineering composition, crystal structure, and defects of final materials. Then, 
I investigate their transformative pathways to unveil structural and chemical changes that occur 
during heat treatment of the nanoparticle-based precursors. Building on understanding of 
atomic-scale interactions during nanoparticle-based precursor formation, I further demonstrate 
the possibility of synthesizing the nanoparticle assembly directly in the nanoparticle synthesis 
reaction and rationalize the process of in situ self-assembly of nanoparticles. Finally, the impact 
of NP-based precursors on the formation and properties of crystalline inorganic materials is 
evaluated, demonstrating the potential of employing NP-based precursors for the rational 
design of functional inorganic materials. },
  author       = {Lee, Seungho},
  issn         = {2663-337X},
  pages        = {144},
  publisher    = {Institute of Science and Technology Austria},
  title        = {{Nanoparticle-based precursors toward advanced crystalline inorganic solids}},
  doi          = {10.15479/AT-ISTA-20415},
  year         = {2025},
}

@phdthesis{20607,
  abstract     = {Oxygen (O) and sulfur (S) redox reactions are at the core of energy storage and biological systems.
Being one of the light, cheap, abundant and most versatile redox active elements, the O and S redox
chemistry is complex, and the practical realization of energy storage systems utilizing these redox
systems is still very far. For O redox, the oxygen evolution from superoxide is a critical aspect, and the
factors that govern the formation of triplet (3O2) and harmful singlet (1O2) oxygen are unclear. My
project on O redox began by setting up a spectroscopic tool to detect singlet oxygen. Then I explored
the governing factors for its formation in both aqueous and non-aqueous solutions through
heterogeneous electron transfer and disproportionation and found out that the release of triplet or
singlet oxygen is governed by individual Marcus normal and inverted region behaviour. For S redox in
non-aqueous media in the context of the Li-S battery, the understanding of the intermediate sulfur
reduction species, known as polysulfides, is incomplete. In the Li-S battery, S8 (the most oxidized form)
is converted to Li2S (the most reduced form) in multiple steps, via first long-chain polysulfides Li2Sx (6
< x < 8), short-chain LiPSs (x < 6) and finally solid Li2S. However, the question of which polysulfides
coexist at any state-of-charge, how they are interconverted, and what the rate and potential limiting
steps are has been entirely open and equally, the solubility of shorter chain LiPSs are unknown. My
PhD project on S redox explores accessing individual polysulfides through different ways to understand
their equilibria in the solution and solid phase and the conversion dynamics. The results from O and S
redox afford detailed insights into kinetics, thermodynamics, and reaction mechanisms, allowing them
to be influenced in an informed way.},
  author       = {Mondal, Soumyadip},
  isbn         = {978-3-99078-071-8},
  issn         = {2663-337X},
  pages        = {71},
  publisher    = {Institute of Science and Technology Austria},
  title        = {{Oxygen and sulfur redox: Conversion kinetics and phase equilibria}},
  doi          = {10.15479/AT-ISTA-20607},
  year         = {2025},
}

