@inproceedings{7123, abstract = {Population protocols are a popular model of distributed computing, in which n agents with limited local state interact randomly, and cooperate to collectively compute global predicates. Inspired by recent developments in DNA programming, an extensive series of papers, across different communities, has examined the computability and complexity characteristics of this model. Majority, or consensus, is a central task in this model, in which agents need to collectively reach a decision as to which one of two states A or B had a higher initial count. Two metrics are important: the time that a protocol requires to stabilize to an output decision, and the state space size that each agent requires to do so. It is known that majority requires Ω(log log n) states per agent to allow for fast (poly-logarithmic time) stabilization, and that O(log2 n) states are sufficient. Thus, there is an exponential gap between the space upper and lower bounds for this problem. This paper addresses this question. On the negative side, we provide a new lower bound of Ω(log n) states for any protocol which stabilizes in O(n1–c) expected time, for any constant c > 0. This result is conditional on monotonicity and output assumptions, satisfied by all known protocols. Technically, it represents a departure from previous lower bounds, in that it does not rely on the existence of dense configurations. Instead, we introduce a new generalized surgery technique to prove the existence of incorrect executions for any algorithm which would contradict the lower bound. Subsequently, our lower bound also applies to general initial configurations, including ones with a leader. On the positive side, we give a new algorithm for majority which uses O(log n) states, and stabilizes in O(log2 n) expected time. Central to the algorithm is a new leaderless phase clock technique, which allows agents to synchronize in phases of Θ(n log n) consecutive interactions using O(log n) states per agent, exploiting a new connection between population protocols and power-of-two-choices load balancing mechanisms. We also employ our phase clock to build a leader election algorithm with a state space of size O(log n), which stabilizes in O(log2 n) expected time.}, author = {Alistarh, Dan-Adrian and Aspnes, James and Gelashvili, Rati}, booktitle = {Proceedings of the 29th Annual ACM-SIAM Symposium on Discrete Algorithms}, isbn = {9781611975031}, location = {New Orleans, LA, United States}, pages = {2221--2239}, publisher = {ACM}, title = {{Space-optimal majority in population protocols}}, doi = {10.1137/1.9781611975031.144}, year = {2018}, } @article{7126, abstract = {In the Minimum Description Length (MDL) principle, learning from the data is equivalent to an optimal coding problem. We show that the codes that achieve optimal compression in MDL are critical in a very precise sense. First, when they are taken as generative models of samples, they generate samples with broad empirical distributions and with a high value of the relevance, defined as the entropy of the empirical frequencies. These results are derived for different statistical models (Dirichlet model, independent and pairwise dependent spin models, and restricted Boltzmann machines). Second, MDL codes sit precisely at a second order phase transition point where the symmetry between the sampled outcomes is spontaneously broken. The order parameter controlling the phase transition is the coding cost of the samples. The phase transition is a manifestation of the optimality of MDL codes, and it arises because codes that achieve a higher compression do not exist. These results suggest a clear interpretation of the widespread occurrence of statistical criticality as a characterization of samples which are maximally informative on the underlying generative process.}, author = {Cubero, Ryan J and Marsili, Matteo and Roudi, Yasser}, issn = {1099-4300}, journal = {Entropy}, keywords = {Minimum Description Length, normalized maximum likelihood, statistical criticality, phase transitions, large deviations}, number = {10}, publisher = {MDPI}, title = {{Minimum description length codes are critical}}, doi = {10.3390/e20100755}, volume = {20}, year = {2018}, } @article{723, abstract = {Escaping local optima is one of the major obstacles to function optimisation. Using the metaphor of a fitness landscape, local optima correspond to hills separated by fitness valleys that have to be overcome. We define a class of fitness valleys of tunable difficulty by considering their length, representing the Hamming path between the two optima and their depth, the drop in fitness. For this function class we present a runtime comparison between stochastic search algorithms using different search strategies. The (1+1) EA is a simple and well-studied evolutionary algorithm that has to jump across the valley to a point of higher fitness because it does not accept worsening moves (elitism). In contrast, the Metropolis algorithm and the Strong Selection Weak Mutation (SSWM) algorithm, a famous process in population genetics, are both able to cross the fitness valley by accepting worsening moves. We show that the runtime of the (1+1) EA depends critically on the length of the valley while the runtimes of the non-elitist algorithms depend crucially on the depth of the valley. Moreover, we show that both SSWM and Metropolis can also efficiently optimise a rugged function consisting of consecutive valleys.}, author = {Oliveto, Pietro and Paixao, Tiago and Pérez Heredia, Jorge and Sudholt, Dirk and Trubenova, Barbora}, journal = {Algorithmica}, number = {5}, pages = {1604 -- 1633}, publisher = {Springer}, title = {{How to escape local optima in black box optimisation when non elitism outperforms elitism}}, doi = {10.1007/s00453-017-0369-2}, volume = {80}, year = {2018}, } @article{7271, abstract = {The recent demand of multifunctional materials and devices for advanced applications in energy conversion and data storage resulted into a revival of multiferroics, that is, materials characterized by the coexistence of ferromagnetism and ferroelectricity. Despite intense efforts made in the past decade, single-phase room temperature multiferroics are yet to be discovered/fabricated. Nanostructured ferroic materials could potentially exhibit multiferroism since a high fraction of their atoms/ions are superficial, thereby altering significantly the properties of the bulk phase. Alternately, a magnetic order can be induced into ferroelectric materials upon aliovalent doping with magnetic ions. Here, we report on the synthesis of aggregate-free single-phase transition-metal-doped BaTiO3 quasi-monodisperse cuboidal nanocrystals (NC) which exhibit multiferroic properties at room temperature and can be suitable for applications in data storage. The proposed synthetic route allows the inclusion of a high concentration of magnetic ions such as Mn+ (M = Cr, Mn, Fe, Co) up to a nominal concentration of 4% without the formation of any secondary phase. The size of the nanocrystals was controlled in a wide range from ∼15 up to ∼70 nm by varying the reaction time from 48 to 144 h. The presence of unpaired electrons and their magnetic ordering have been probed by electron paramagnetic resonance spectroscopy (EPR), and a vibrating sample magnetometer (VSM). Likewise, an acentric structure, associated with the existence of a dielectric polarization, was observed by lattice dynamics analysis and piezoresponse force microscopy (PFM). These results show that high-quality titanium-containing perovskite nanocrystals which display multiferroic properties at room temperature can be fabricated via soft solution-based synthetic routes, and the properties of these materials can be modulated by changing the size of the nanocrystals and the concentration of the dopant thereby opening the door to the design and study of single-phase multiferroic materials.}, author = {Costanzo, Tommaso and McCracken, John and Rotaru, Aurelian and Caruntu, Gabriel}, issn = {2574-0970}, journal = {ACS Applied Nano Materials}, number = {9}, pages = {4863--4874}, publisher = {ACS}, title = {{Quasi-monodisperse transition-metal-doped BaTiO3 (M = Cr, Mn, Fe, Co) colloidal nanocrystals with multiferroic properties}}, doi = {10.1021/acsanm.8b01036}, volume = {1}, year = {2018}, } @article{7277, abstract = {Solid alkali metal carbonates are universal passivation layer components of intercalation battery materials and common side products in metal‐O2 batteries, and are believed to form and decompose reversibly in metal‐O2/CO2 cells. In these cathodes, Li2CO3 decomposes to CO2 when exposed to potentials above 3.8 V vs. Li/Li+. However, O2 evolution, as would be expected according to the decomposition reaction 2 Li2CO3→4 Li++4 e−+2 CO2+O2, is not detected. O atoms are thus unaccounted for, which was previously ascribed to unidentified parasitic reactions. Here, we show that highly reactive singlet oxygen (1O2) forms upon oxidizing Li2CO3 in an aprotic electrolyte and therefore does not evolve as O2. These results have substantial implications for the long‐term cyclability of batteries: they underpin the importance of avoiding 1O2 in metal‐O2 batteries, question the possibility of a reversible metal‐O2/CO2 battery based on a carbonate discharge product, and help explain the interfacial reactivity of transition‐metal cathodes with residual Li2CO3.}, author = {Mahne, Nika and Renfrew, Sara E. and McCloskey, Bryan D. and Freunberger, Stefan Alexander}, issn = {1433-7851}, journal = {Angewandte Chemie International Edition}, number = {19}, pages = {5529--5533}, publisher = {Wiley}, title = {{Electrochemical oxidation of Lithium Carbonate generates singlet oxygen}}, doi = {10.1002/anie.201802277}, volume = {57}, year = {2018}, } @article{7285, abstract = {Hydrogelation, the self-assembly of molecules into soft, water-loaded networks, is one way to bridge the structural gap between single molecules and functional materials. The potential of hydrogels, such as those based on perylene bisimides, lies in their chemical, physical, optical, and electronic properties, which are governed by the supramolecular structure of the gel. However, the structural motifs and their precise role for long-range conductivity are yet to be explored. Here, we present a comprehensive structural picture of a perylene bisimide hydrogel, suggesting that its long-range conductivity is limited by charge transfer between electronic backbones. We reveal nanocrystalline ribbon-like structures as the electronic and structural backbone units between which charge transfer is mediated by polar solvent bridges. We exemplify this effect with sensing, where exposure to polar vapor enhances conductivity by 5 orders of magnitude, emphasizing the crucial role of the interplay between structural motif and surrounding medium for the rational design of devices based on nanocrystalline hydrogels.}, author = {Burian, Max and Rigodanza, Francesco and Demitri, Nicola and D̵ord̵ević, Luka and Marchesan, Silvia and Steinhartova, Tereza and Letofsky-Papst, Ilse and Khalakhan, Ivan and Mourad, Eléonore and Freunberger, Stefan Alexander and Amenitsch, Heinz and Prato, Maurizio and Syrgiannis, Zois}, issn = {1936-0851}, journal = {ACS Nano}, number = {6}, pages = {5800--5806}, publisher = {ACS}, title = {{Inter-backbone charge transfer as prerequisite for long-range conductivity in perylene bisimide hydrogels}}, doi = {10.1021/acsnano.8b01689}, volume = {12}, year = {2018}, } @article{7286, abstract = {The solid electrolyte interphase (SEI) in Li and Na ion batteries forms when highly reducing or oxidizing electrode materials come into contact with a liquid organic electrolyte. Its ability to form a mechanically robust, ion-conducting, and electron-insulating layer critically determines performance, cycle life, and safety. Li or Na alkyl carbonates (LiAC and NaAC, respectively) are lead SEI components in state-of-the-art carbonate based electrolytes, and our fundamental understanding of their charge transport and mechanical properties may hold the key to designing electrolytes forming an improved SEI. We synthesized a homologous series of LiACs and NaACs from methyl to octyl analogues and characterized them with respect to structure, ionic conductivity, and stiffness. The compounds assume layered structures except for the lithium methyl carbonate. Room-temperature conductivities were found to be ∼10–9 S cm–1 for lithium methyl carbonate, <10–12 S cm–1 for the other LiACs, and <10–12 S cm–1 for the NaACs with ion transport mostly attributed to grain boundaries. While LiACs show stiffnesses of ∼1 GPa, NaACs become significantly softer with increasing chain lengths. These findings will help to more precisely interpret the complex results from charge transport and mechanical characterization of real SEIs and can give a rationale for influencing the SEI’s mechanical properties via the electrolyte.}, author = {Schafzahl, Lukas and Ehmann, Heike and Kriechbaum, Manfred and Sattelkow, Jürgen and Ganner, Thomas and Plank, Harald and Wilkening, Martin and Freunberger, Stefan Alexander}, issn = {1520-5002}, journal = {Chemistry of Materials}, number = {10}, pages = {3338--3345}, publisher = {ACS}, title = {{Long-chain Li and Na alkyl carbonates as solid electrolyte interphase components: Structure, ion transport, and mechanical properties}}, doi = {10.1021/acs.chemmater.8b00750}, volume = {30}, year = {2018}, } @article{7287, abstract = {Passivation layers on electrode materials are ubiquitous in nonaqueous battery chemistries and strongly govern performance and lifetime. They comprise breakdown products of the electrolyte including carbonate, alkyl carbonates, alkoxides, carboxylates, and polymers. Parasitic chemistry in metal–O2 batteries forms similar products and is tied to the deviation of the O2 balance from the ideal stoichiometry during formation/decomposition of alkaline peroxides or superoxides. Accurate and integral quantification of carbonaceous species and peroxides or superoxides in battery electrodes remains, however, elusive. We present a refined procedure to quantify them accurately and sensitively by pointing out and rectifying pitfalls of previous procedures. Carbonaceous compounds are differentiated into inorganic and organic ones. We combine mass and UV–vis spectrometry to quantify evolved O2 and complexed peroxide and CO2 evolved from carbonaceous compounds by acid treatment and Fenton’s reaction. The capabilities of the method are exemplified by means of Li–O2 and Na–O2 cathodes, graphite anodes, and LiNi0.8Co0.15Al0.05O2 cathodes.}, author = {Schafzahl, Bettina and Mourad, Eléonore and Schafzahl, Lukas and Petit, Yann K. and Raju, Anjana R. and Thotiyl, Musthafa Ottakam and Wilkening, Martin and Slugovc, Christian and Freunberger, Stefan Alexander}, issn = {2380-8195}, journal = {ACS Energy Letters}, number = {1}, pages = {170--176}, publisher = {ACS}, title = {{Quantifying total superoxide, peroxide, and carbonaceous compounds in metal–O2 batteries and the solid electrolyte interphase}}, doi = {10.1021/acsenergylett.7b01111}, volume = {3}, year = {2018}, } @article{738, abstract = {This paper is devoted to automatic competitive analysis of real-time scheduling algorithms for firm-deadline tasksets, where only completed tasks con- tribute some utility to the system. Given such a taskset T , the competitive ratio of an on-line scheduling algorithm A for T is the worst-case utility ratio of A over the utility achieved by a clairvoyant algorithm. We leverage the theory of quantitative graph games to address the competitive analysis and competitive synthesis problems. For the competitive analysis case, given any taskset T and any finite-memory on- line scheduling algorithm A , we show that the competitive ratio of A in T can be computed in polynomial time in the size of the state space of A . Our approach is flexible as it also provides ways to model meaningful constraints on the released task sequences that determine the competitive ratio. We provide an experimental study of many well-known on-line scheduling algorithms, which demonstrates the feasibility of our competitive analysis approach that effectively replaces human ingenuity (required Preliminary versions of this paper have appeared in Chatterjee et al. ( 2013 , 2014 ). B Andreas Pavlogiannis pavlogiannis@ist.ac.at Krishnendu Chatterjee krish.chat@ist.ac.at Alexander Kößler koe@ecs.tuwien.ac.at Ulrich Schmid s@ecs.tuwien.ac.at 1 IST Austria (Institute of Science and Technology Austria), Am Campus 1, 3400 Klosterneuburg, Austria 2 Embedded Computing Systems Group, Vienna University of Technology, Treitlstrasse 3, 1040 Vienna, Austria 123 Real-Time Syst for finding worst-case scenarios) by computing power. For the competitive synthesis case, we are just given a taskset T , and the goal is to automatically synthesize an opti- mal on-line scheduling algorithm A , i.e., one that guarantees the largest competitive ratio possible for T . We show how the competitive synthesis problem can be reduced to a two-player graph game with partial information, and establish that the compu- tational complexity of solving this game is Np -complete. The competitive synthesis problem is hence in Np in the size of the state space of the non-deterministic labeled transition system encoding the taskset. Overall, the proposed framework assists in the selection of suitable scheduling algorithms for a given taskset, which is in fact the most common situation in real-time systems design. }, author = {Chatterjee, Krishnendu and Pavlogiannis, Andreas and Kößler, Alexander and Schmid, Ulrich}, journal = {Real-Time Systems}, number = {1}, pages = {166 -- 207}, publisher = {Springer}, title = {{Automated competitive analysis of real time scheduling with graph games}}, doi = {10.1007/s11241-017-9293-4}, volume = {54}, year = {2018}, } @inproceedings{7407, abstract = {Proofs of space (PoS) [Dziembowski et al., CRYPTO'15] are proof systems where a prover can convince a verifier that he "wastes" disk space. PoS were introduced as a more ecological and economical replacement for proofs of work which are currently used to secure blockchains like Bitcoin. In this work we investigate extensions of PoS which allow the prover to embed useful data into the dedicated space, which later can be recovered. Our first contribution is a security proof for the original PoS from CRYPTO'15 in the random oracle model (the original proof only applied to a restricted class of adversaries which can store a subset of the data an honest prover would store). When this PoS is instantiated with recent constructions of maximally depth robust graphs, our proof implies basically optimal security. As a second contribution we show three different extensions of this PoS where useful data can be embedded into the space required by the prover. Our security proof for the PoS extends (non-trivially) to these constructions. We discuss how some of these variants can be used as proofs of catalytic space (PoCS), a notion we put forward in this work, and which basically is a PoS where most of the space required by the prover can be used to backup useful data. Finally we discuss how one of the extensions is a candidate construction for a proof of replication (PoR), a proof system recently suggested in the Filecoin whitepaper. }, author = {Pietrzak, Krzysztof Z}, booktitle = {10th Innovations in Theoretical Computer Science Conference}, isbn = {978-3-95977-095-8}, issn = {1868-8969}, location = {San Diego, CA, United States}, pages = {59:1--59:25}, publisher = {Schloss Dagstuhl - Leibniz-Zentrum für Informatik}, title = {{Proofs of catalytic space}}, doi = {10.4230/LIPICS.ITCS.2019.59}, volume = {124}, year = {2018}, } @article{742, abstract = {We give a detailed and easily accessible proof of Gromov’s Topological Overlap Theorem. Let X be a finite simplicial complex or, more generally, a finite polyhedral cell complex of dimension d. Informally, the theorem states that if X has sufficiently strong higher-dimensional expansion properties (which generalize edge expansion of graphs and are defined in terms of cellular cochains of X) then X has the following topological overlap property: for every continuous map (Formula presented.) there exists a point (Formula presented.) that is contained in the images of a positive fraction (Formula presented.) of the d-cells of X. More generally, the conclusion holds if (Formula presented.) is replaced by any d-dimensional piecewise-linear manifold M, with a constant (Formula presented.) that depends only on d and on the expansion properties of X, but not on M.}, author = {Dotterrer, Dominic and Kaufman, Tali and Wagner, Uli}, journal = {Geometriae Dedicata}, number = {1}, pages = {307–317}, publisher = {Springer}, title = {{On expansion and topological overlap}}, doi = {10.1007/s10711-017-0291-4}, volume = {195}, year = {2018}, } @article{7458, abstract = {The coupling between magnetic and electric subsystems in composites of ferromagnetic and ferroelectric phases is a product property that is facilitated by mechanical strain that arises due to magnetostriction and the piezoelectric effect in the constituent phases. Such multiferroic composites are of immense interests for studies on the physics of electromagnetic coupling and for use in a variety of applications. Here, we focus on magneto-electric (ME) coupling in nanocomposites. Particular emphasis is on core-shell particles and coaxial fibers, thin film heterostructures, and planar structures with a variety of mechanical connectivity. A brief review of models that predict strong ME effects in nanostructures is followed by synthesis and characterization. Core-shell particulate composites can be prepared by hydrothermal processes and chemical or deoxyribonucleic acid-assisted assembly. Electrospinning techniques have been utilized to prepare defect free core-shell nanofibers. Core-shell particles and fibers can be assembled into superstructures with the aid of magnetic and electric fields and characterized for possible use in advanced technologies. Chemical-vapor deposition techniques have been shown to be effective for the preparation of heterostructures of ferrites and ferroelectrics. Exotic planar multiferroic structures with potential for enhancing ME coupling strengths are also considered. Scanning probe microscopy techniques are ideal for probing the nature of direct- and converse-ME coupling in individual nanostructures. Magnetoelectric characterization of assemblies of nanocomposites can be done by ME voltage coefficient, magnetic field induced polarization, and magneto-dielectric effects. We conclude with a brief discussion on possible avenues for strengthening the product properties in the nanocomposites.}, author = {Viehland, Dwight and Li, Jie Fang and Yang, Yaodong and Costanzo, Tommaso and Yourdkhani, Amin and Caruntu, Gabriel and Zhou, Peng and Zhang, Tianjin and Li, Tianqian and Gupta, Arunava and Popov, Maksym and Srinivasan, Gopalan}, issn = {0021-8979}, journal = {Journal of Applied Physics}, number = {6}, publisher = {AIP}, title = {{Tutorial: Product properties in multiferroic nanocomposites}}, doi = {10.1063/1.5038726}, volume = {124}, year = {2018}, } @article{76, abstract = {Consider a fully-connected synchronous distributed system consisting of n nodes, where up to f nodes may be faulty and every node starts in an arbitrary initial state. In the synchronous C-counting problem, all nodes need to eventually agree on a counter that is increased by one modulo C in each round for given C>1. In the self-stabilising firing squad problem, the task is to eventually guarantee that all non-faulty nodes have simultaneous responses to external inputs: if a subset of the correct nodes receive an external “go” signal as input, then all correct nodes should agree on a round (in the not-too-distant future) in which to jointly output a “fire” signal. Moreover, no node should generate a “fire” signal without some correct node having previously received a “go” signal as input. We present a framework reducing both tasks to binary consensus at very small cost. For example, we obtain a deterministic algorithm for self-stabilising Byzantine firing squads with optimal resilience f<n/3, asymptotically optimal stabilisation and response time O(f), and message size O(log f). As our framework does not restrict the type of consensus routines used, we also obtain efficient randomised solutions.}, author = {Lenzen, Christoph and Rybicki, Joel}, journal = {Distributed Computing}, publisher = {Springer}, title = {{Near-optimal self-stabilising counting and firing squads}}, doi = {10.1007/s00446-018-0342-6}, year = {2018}, } @misc{9831, abstract = {Implementation of the inference method in Matlab, including three applications of the method: The first one for the model of ant motion, the second one for bacterial chemotaxis, and the third one for the motion of fish.}, author = {Bod’Ová, Katarína and Mitchell, Gabriel and Harpaz, Roy and Schneidman, Elad and Tkačik, Gašper}, publisher = {Public Library of Science}, title = {{Implementation of the inference method in Matlab}}, doi = {10.1371/journal.pone.0193049.s001}, year = {2018}, } @misc{9837, abstract = {Both classical and recent studies suggest that chromosomal inversion polymorphisms are important in adaptation and speciation. However, biases in discovery and reporting of inversions make it difficult to assess their prevalence and biological importance. Here, we use an approach based on linkage disequilibrium among markers genotyped for samples collected across a transect between contrasting habitats to detect chromosomal rearrangements de novo. We report 17 polymorphic rearrangements in a single locality for the coastal marine snail, Littorina saxatilis. Patterns of diversity in the field and of recombination in controlled crosses provide strong evidence that at least the majority of these rearrangements are inversions. Most show clinal changes in frequency between habitats, suggestive of divergent selection, but only one appears to be fixed for different arrangements in the two habitats. Consistent with widespread evidence for balancing selection on inversion polymorphisms, we argue that a combination of heterosis and divergent selection can explain the observed patterns and should be considered in other systems spanning environmental gradients.}, author = {Faria, Rui and Chaube, Pragya and Morales, Hernán E. and Larsson, Tomas and Lemmon, Alan R. and Lemmon, Emily M. and Rafajlović, Marina and Panova, Marina and Ravinet, Mark and Johannesson, Kerstin and Westram, Anja M and Butlin, Roger K.}, publisher = {Dryad}, title = {{Data from: Multiple chromosomal rearrangements in a hybrid zone between Littorina saxatilis ecotypes}}, doi = {10.5061/dryad.72cg113}, year = {2018}, } @misc{9838, abstract = {Facial shape is the basis for facial recognition and categorization. Facial features reflect the underlying geometry of the skeletal structures. Here we reveal that cartilaginous nasal capsule (corresponding to upper jaw and face) is shaped by signals generated by neural structures: brain and olfactory epithelium. Brain-derived Sonic Hedgehog (SHH) enables the induction of nasal septum and posterior nasal capsule, whereas the formation of a capsule roof is controlled by signals from the olfactory epithelium. Unexpectedly, the cartilage of the nasal capsule turned out to be important for shaping membranous facial bones during development. This suggests that conserved neurosensory structures could benefit from protection and have evolved signals inducing cranial cartilages encasing them. Experiments with mutant mice revealed that the genomic regulatory regions controlling production of SHH in the nervous system contribute to facial cartilage morphogenesis, which might be a mechanism responsible for the adaptive evolution of animal faces and snouts.}, author = {Kaucka, Marketa and Petersen, Julian and Tesarova, Marketa and Szarowska, Bara and Kastriti, Maria Eleni and Xie, Meng and Kicheva, Anna and Annusver, Karl and Kasper, Maria and Symmons, Orsolya and Pan, Leslie and Spitz, Francois and Kaiser, Jozef and Hovorakova, Maria and Zikmund, Tomas and Sunadome, Kazunori and Matise, Michael P and Wang, Hui and Marklund, Ulrika and Abdo, Hind and Ernfors, Patrik and Maire, Pascal and Wurmser, Maud and Chagin, Andrei S and Fried, Kaj and Adameyko, Igor}, publisher = {Dryad}, title = {{Data from: Signals from the brain and olfactory epithelium control shaping of the mammalian nasal capsule cartilage}}, doi = {10.5061/dryad.f1s76f2}, year = {2018}, } @misc{9840, abstract = {Herd immunity, a process in which resistant individuals limit the spread of a pathogen among susceptible hosts has been extensively studied in eukaryotes. Even though bacteria have evolved multiple immune systems against their phage pathogens, herd immunity in bacteria remains unexplored. Here we experimentally demonstrate that herd immunity arises during phage epidemics in structured and unstructured Escherichia coli populations consisting of differing frequencies of susceptible and resistant cells harboring CRISPR immunity. In addition, we develop a mathematical model that quantifies how herd immunity is affected by spatial population structure, bacterial growth rate, and phage replication rate. Using our model we infer a general epidemiological rule describing the relative speed of an epidemic in partially resistant spatially structured populations. Our experimental and theoretical findings indicate that herd immunity may be important in bacterial communities, allowing for stable coexistence of bacteria and their phages and the maintenance of polymorphism in bacterial immunity.}, author = {Payne, Pavel and Geyrhofer, Lukas and Barton, Nicholas H and Bollback, Jonathan P}, publisher = {Dryad}, title = {{Data from: CRISPR-based herd immunity limits phage epidemics in bacterial populations}}, doi = {10.5061/dryad.42n44}, year = {2018}, } @misc{9841, abstract = {Around 150 million years ago, eusocial termites evolved from within the cockroaches, 50 million years before eusocial Hymenoptera, such as bees and ants, appeared. Here, we report the 2-Gb genome of the German cockroach, Blattella germanica, and the 1.3-Gb genome of the drywood termite Cryptotermes secundus. We show evolutionary signatures of termite eusociality by comparing the genomes and transcriptomes of three termites and the cockroach against the background of 16 other eusocial and non-eusocial insects. Dramatic adaptive changes in genes underlying the production and perception of pheromones confirm the importance of chemical communication in the termites. These are accompanied by major changes in gene regulation and the molecular evolution of caste determination. Many of these results parallel molecular mechanisms of eusocial evolution in Hymenoptera. However, the specific solutions are remarkably different, thus revealing a striking case of convergence in one of the major evolutionary transitions in biological complexity.}, author = {Harrison, Mark C. and Jongepier, Evelien and Robertson, Hugh M. and Arning, Nicolas and Bitard-Feildel, Tristan and Chao, Hsu and Childers, Christopher P. and Dinh, Huyen and Doddapaneni, Harshavardhan and Dugan, Shannon and Gowin, Johannes and Greiner, Carolin and Han, Yi and Hu, Haofu and Hughes, Daniel S. T. and Huylmans, Ann K and Kemena, Carsten and Kremer, Lukas P. M. and Lee, Sandra L. and Lopez-Ezquerra, Alberto and Mallet, Ludovic and Monroy-Kuhn, Jose M. and Moser, Annabell and Murali, Shwetha C. and Muzny, Donna M. and Otani, Saria and Piulachs, Maria-Dolors and Poelchau, Monica and Qu, Jiaxin and Schaub, Florentine and Wada-Katsumata, Ayako and Worley, Kim C. and Xie, Qiaolin and Ylla, Guillem and Poulsen, Michael and Gibbs, Richard A. and Schal, Coby and Richards, Stephen and Belles, Xavier and Korb, Judith and Bornberg-Bauer, Erich}, publisher = {Dryad}, title = {{Data from: Hemimetabolous genomes reveal molecular basis of termite eusociality}}, doi = {10.5061/dryad.51d4r}, year = {2018}, } @article{9915, abstract = {The evolution of assortative mating is a key part of the speciation process. Stronger assortment, or greater divergence in mating traits, between species pairs with overlapping ranges is commonly observed, but possible causes of this pattern of reproductive character displacement are difficult to distinguish. We use a multidisciplinary approach to provide a rare example where it is possible to distinguish among hypotheses concerning the evolution of reproductive character displacement. We build on an earlier comparative analysis that illustrated a strong pattern of greater divergence in penis form between pairs of sister species with overlapping ranges than between allopatric sister-species pairs, in a large clade of marine gastropods (Littorinidae). We investigate both assortative mating and divergence in male genitalia in one of the sister-species pairs, discriminating among three contrasting processes each of which can generate a pattern of reproductive character displacement: reinforcement, reproductive interference and the Templeton effect. We demonstrate reproductive character displacement in assortative mating, but not in genital form between this pair of sister species and use demographic models to distinguish among the different processes. Our results support a model with no gene flow since secondary contact and thus favor reproductive interference as the cause of reproductive character displacement for mate choice, rather than reinforcement. High gene flow within species argues against the Templeton effect. Secondary contact appears to have had little impact on genital divergence.}, author = {Hollander, Johan and Montaño-Rendón, Mauricio and Bianco, Giuseppe and Yang, Xi and Westram, Anja M and Duvaux, Ludovic and Reid, David G. and Butlin, Roger K.}, issn = {2056-3744}, journal = {Evolution Letters}, number = {6}, pages = {557--566}, publisher = {Wiley}, title = {{Are assortative mating and genital divergence driven by reinforcement?}}, doi = {10.1002/evl3.85}, volume = {2}, year = {2018}, } @article{9917, abstract = {Adaptive divergence and speciation may happen despite opposition by gene flow. Identifying the genomic basis underlying divergence with gene flow is a major task in evolutionary genomics. Most approaches (e.g., outlier scans) focus on genomic regions of high differentiation. However, not all genomic architectures potentially underlying divergence are expected to show extreme differentiation. Here, we develop an approach that combines hybrid zone analysis (i.e., focuses on spatial patterns of allele frequency change) with system-specific simulations to identify loci inconsistent with neutral evolution. We apply this to a genome-wide SNP set from an ideally suited study organism, the intertidal snail Littorina saxatilis, which shows primary divergence between ecotypes associated with different shore habitats. We detect many SNPs with clinal patterns, most of which are consistent with neutrality. Among non-neutral SNPs, most are located within three large putative inversions differentiating ecotypes. Many non-neutral SNPs show relatively low levels of differentiation. We discuss potential reasons for this pattern, including loose linkage to selected variants, polygenic adaptation and a component of balancing selection within populations (which may be expected for inversions). Our work is in line with theory predicting a role for inversions in divergence, and emphasizes that genomic regions contributing to divergence may not always be accessible with methods purely based on allele frequency differences. These conclusions call for approaches that take spatial patterns of allele frequency change into account in other systems.}, author = {Westram, Anja M and Rafajlović, Marina and Chaube, Pragya and Faria, Rui and Larsson, Tomas and Panova, Marina and Ravinet, Mark and Blomberg, Anders and Mehlig, Bernhard and Johannesson, Kerstin and Butlin, Roger}, issn = {2056-3744}, journal = {Evolution Letters}, number = {4}, pages = {297--309}, publisher = {Wiley}, title = {{Clines on the seashore: The genomic architecture underlying rapid divergence in the face of gene flow}}, doi = {10.1002/evl3.74}, volume = {2}, year = {2018}, }