@inproceedings{6740, abstract = {We describe coding techniques that achieve the capacity of a discrete memoryless asymmetric channel. To do so, we discuss how recent advances in coding for symmetric channels yield more efficient solutions also for the asymmetric case. In more detail, we consider three basic approaches. The first one is Gallager's scheme that concatenates a linear code with a non-linear mapper, in order to bias the input distribution. We explicitly show that both polar codes and spatially coupled codes can be employed in this scenario. Further, we derive a scaling law between the gap to capacity, the cardinality of channel input and output alphabets, and the required size of the mapper. The second one is an integrated approach in which the coding scheme is used both for source coding, in order to create codewords with the capacity-achieving distribution, and for channel coding, in order to provide error protection. Such a technique has been recently introduced by Honda and Yamamoto in the context of polar codes, and we show how to apply it also to the design of sparse graph codes. The third approach is based on an idea due to Böcherer and Mathar and separates completely the two tasks of source coding and channel coding by “chaining” together several codewords. We prove that we can combine any suitable source code with any suitable channel code in order to provide optimal schemes for asymmetric channels. In particular, polar codes and spatially coupled codes fulfill the required conditions.}, author = {Mondelli, Marco and Urbanke, Rudiger and Hassani, Hamed}, booktitle = {52nd Annual Allerton Conference on Communication, Control, and Computing}, location = {Monticello, IL, United States}, pages = {789--796}, publisher = {IEEE}, title = {{How to achieve the capacity of asymmetric channels}}, doi = {10.1109/allerton.2014.7028535}, year = {2014}, } @article{6744, abstract = {With the aim of extending the coverage and improving the performance of impulse radio ultra-wideband (UWB) systems, this paper focuses on developing a novel single differential encoded decode and forward (DF) non-cooperative relaying scheme (NCR). To favor simple receiver structures, differential noncoherent detection is employed which enables effective energy capture without any channel estimation. Putting emphasis on the general case of multi-hop relaying, we illustrate an original algorithm for the joint power allocation and path selection (JPAPS), minimizing an approximate expression of the overall bit error rate (BER). In particular, after deriving a closed-form power allocation strategy, the optimal path selection is reduced to a shortest path problem on a connected graph, which can be solved without any topology information with complexity O(N 3 ), N being the number of available relays of the network. An approximate scheme is also presented, which reduces the complexity to O(N 2 ) while showing a negligible performance loss, and for benchmarking purposes, an exhaustive-search based multi-hop DF cooperative strategy is derived. Simulation results for various network setups corroborate the effectiveness of the proposed low-complexity JPAPS algorithm, which favorably compares to existing AF and DF relaying methods.}, author = {Mondelli, Marco and Zhou, Qi and Lottici, Vincenzo and Ma, Xiaoli}, journal = {IEEE Transactions on Wireless Communications}, number = {3}, pages = {1397--1409}, publisher = {IEEE}, title = {{Joint power allocation and path selection for multi-hop noncoherent decode and forward UWB communications}}, doi = {10.1109/twc.2014.020914.130669}, volume = {13}, year = {2014}, } @book{6853, abstract = {This monograph presents a short course in computational geometry and topology. In the first part the book covers Voronoi diagrams and Delaunay triangulations, then it presents the theory of alpha complexes which play a crucial role in biology. The central part of the book is the homology theory and their computation, including the theory of persistence which is indispensable for applications, e.g. shape reconstruction. The target audience comprises researchers and practitioners in mathematics, biology, neuroscience and computer science, but the book may also be beneficial to graduate students of these fields.}, author = {Edelsbrunner, Herbert}, isbn = {9-783-3190-5956-3}, issn = {2191-5318}, pages = {IX, 110}, publisher = {Springer Nature}, title = {{A Short Course in Computational Geometry and Topology}}, doi = {10.1007/978-3-319-05957-0}, year = {2014}, } @techreport{7038, author = {Huszár, Kristóf and Rolinek, Michal}, pages = {5}, publisher = {IST Austria}, title = {{Playful Math - An introduction to mathematical games}}, year = {2014}, } @article{7071, abstract = {Spin and orbital quantum numbers play a key role in the physics of Mott insulators, but in most systems they are connected only indirectly—via the Pauli exclusion principle and the Coulomb interaction. Iridium-based oxides (iridates) introduce strong spin–orbit coupling directly, such that these numbers become entwined together and the Mott physics attains a strong orbital character. In the layered honeycomb iridates this is thought to generate highly spin–anisotropic magnetic interactions, coupling the spin to a given spatial direction of exchange and leading to strongly frustrated magnetism. Here we report a new iridate structure that has the same local connectivity as the layered honeycomb and exhibits striking evidence for highly spin–anisotropic exchange. The basic structural units of this material suggest that a new family of three-dimensional structures could exist, the ‘harmonic honeycomb’ iridates, of which the present compound is the first example.}, author = {Modic, Kimberly A and Smidt, Tess E. and Kimchi, Itamar and Breznay, Nicholas P. and Biffin, Alun and Choi, Sungkyun and Johnson, Roger D. and Coldea, Radu and Watkins-Curry, Pilanda and McCandless, Gregory T. and Chan, Julia Y. and Gandara, Felipe and Islam, Z. and Vishwanath, Ashvin and Shekhter, Arkady and McDonald, Ross D. and Analytis, James G.}, issn = {2041-1723}, journal = {Nature Communications}, publisher = {Springer Science and Business Media LLC}, title = {{Realization of a three-dimensional spin–anisotropic harmonic honeycomb iridate}}, doi = {10.1038/ncomms5203}, volume = {5}, year = {2014}, } @article{7072, abstract = {We investigate the structural and magnetic properties of two molecule-based magnets synthesized from the same starting components. Their different structural motifs promote contrasting exchange pathways and consequently lead to markedly different magnetic ground states. Through examination of their structural and magnetic properties we show that [Cu(pyz)(H2O)(gly)2](ClO4)2 may be considered a quasi-one-dimensional quantum Heisenberg antiferromagnet whereas the related compound [Cu(pyz)(gly)](ClO4), which is formed from dimers of antiferromagnetically interacting Cu2+ spins, remains disordered down to at least 0.03 K in zero field but shows a field-temperature phase diagram reminiscent of that seen in materials showing a Bose-Einstein condensation of magnons.}, author = {Lancaster, T. and Goddard, P. A. and Blundell, S. J. and Foronda, F. R. and Ghannadzadeh, S. and Möller, J. S. and Baker, P. J. and Pratt, F. L. and Baines, C. and Huang, L. and Wosnitza, J. and McDonald, R. D. and Modic, Kimberly A and Singleton, J. and Topping, C. V. and Beale, T. A. W. and Xiao, F. and Schlueter, J. A. and Barton, A. M. and Cabrera, R. D. and Carreiro, K. E. and Tran, H. E. and Manson, J. L.}, issn = {1079-7114}, journal = {Physical Review Letters}, number = {20}, publisher = {APS}, title = {{Controlling magnetic order and quantum disorder in molecule-based magnets}}, doi = {10.1103/physrevlett.112.207201}, volume = {112}, year = {2014}, } @article{7300, abstract = {Photoinduced electron transfer (PET), which causes pH-dependent quenching of fluorescent dyes, is more effectively introduced by phenolic groups than by amino groups which have been much more commonly used so far. That is demonstrated by fluorescence measurements involving several classes of fluorophores. Electrochemical measurements show that PET in several amino-modified dyes is thermodynamically favorable, even though it was not experimentally found, underlining the importance of kinetic aspects to the process. Consequently, the attachment of phenolic groups allows for fast and simple preparation of a wide selection of fluorescent pH-probes with tailor-made spectral properties, sensitive ranges, and individual advantages, so that a large number of applications can be realized. Fluorophores carrying phenolic groups may also be used for sensing analytes other than pH or molecular switching and signaling.}, author = {Aigner, Daniel and Freunberger, Stefan Alexander and Wilkening, Martin and Saf, Robert and Borisov, Sergey M. and Klimant, Ingo}, issn = {0003-2700}, journal = {Analytical Chemistry}, number = {18}, pages = {9293--9300}, publisher = {ACS}, title = {{Enhancing photoinduced electron transfer efficiency of fluorescent pH-probes with halogenated phenols}}, doi = {10.1021/ac502513g}, volume = {86}, year = {2014}, } @article{7301, abstract = {Several problems arise at the O2 (positive) electrode in the Li-air battery, including solvent/electrode decomposition and electrode passivation by insulating Li2O2. Progress partially depends on exploring the basic electrochemistry of O2 reduction. Here we describe the effect of complexing-cations on the electrochemical reduction of O2 in DMSO in the presence and absence of a Li salt. The solubility of alkaline peroxides in DMSO is enhanced by the complexing-cations, consistent with their strong interaction with reduced O2. The complexing-cations also increase the rate of the 1-electron O2 reduction to O2•– by up to six-fold (k° = 2.4 ×10–3 to 1.5 × 10–2 cm s–1) whether or not Li+ ions are present. In the absence of Li+, the complexing-cations also promote the reduction of O2•– to O22–. In the presence of Li+ and complexing-cations, and despite the interaction of the reduced O2 with the latter, SERS confirms that the product is still Li2O2.}, author = {Li, Chunmei and Fontaine, Olivier and Freunberger, Stefan Alexander and Johnson, Lee and Grugeon, Sylvie and Laruelle, Stéphane and Bruce, Peter G. and Armand, Michel}, issn = {1932-7447}, journal = {The Journal of Physical Chemistry C}, number = {7}, pages = {3393--3401}, publisher = {ACS}, title = {{Aprotic Li–O2 battery: Influence of complexing agents on oxygen reduction in an aprotic solvent}}, doi = {10.1021/jp4093805}, volume = {118}, year = {2014}, } @article{7302, abstract = {Understanding charge carrier transport in Li2O2, the storage material in the non-aqueous Li-O2 battery, is key to the development of this high-energy battery. Here, we studied ionic transport properties and Li self-diffusion in nanocrystalline Li2O2 by conductivity and temperature variable 7Li NMR spectroscopy. Nanostructured Li2O2, characterized by a mean crystallite size of less than 50 nm as estimated from X-ray diffraction peak broadening, was prepared by high-energy ball milling of microcrystalline lithium peroxide with μm sized crystallites. At room temperature the overall conductivity σ of the microcrystalline reference sample turned out to be very low (3.4 × 10−13 S cm−1) which is in agreement with results from temperature-variable 7Li NMR line shape measurements. Ball-milling, however, leads to an increase of σ by approximately two orders of magnitude (1.1 × 10−10 S cm−1); correspondingly, the activation energy decreases from 0.89 eV to 0.82 eV. The electronic contribution σeon, however, is in the order of 9 × 10−12 S cm−1 which makes less than 10% of the total value. Interestingly, 7Li NMR lines of nano-Li2O2 undergo pronounced heterogeneous motional narrowing which manifests in a two-component line shape emerging with increasing temperatures. Most likely, the enhancement in σ can be traced back to the generation of a spin reservoir with highly mobile Li ions; these are expected to reside in the nearest neighbourhood of defects generated or near the structurally disordered and defect-rich interfacial regions formed during mechanical treatment.}, author = {Dunst, A. and Epp, V. and Hanzu, I. and Freunberger, Stefan Alexander and Wilkening, M.}, issn = {1754-5692}, journal = {Energy & Environmental Science}, number = {8}, pages = {2739--2752}, publisher = {RSC}, title = {{Short-range Li diffusion vs. long-range ionic conduction in nanocrystalline lithium peroxide Li2O2—the discharge product in lithium-air batteries}}, doi = {10.1039/c4ee00496e}, volume = {7}, year = {2014}, } @inbook{7303, abstract = {The electrolyte in the non-aqueous (aprotic) lithium air battery has a profound influence on the reactions that occur at the anode and cathode, and hence its overall operation on discharge/charge. It must possess a wide range of attributes, exceeding the requirements of electrolytes for Lithium ion batteries by far. The most important additional issues are stability at both anode and cathode in the presence of O2. The known problems with cycling the Li metal/non-aqueous electrolyte interface are further complicated by O2. New and much less understood are the reactions at the O2 cathode/electrolyte interface where the highly reversible formation/decomposition of Li2O2 on discharge/charge is critical for the operation of the non-aqueous lithium air battery. Many aprotic electrolytes exhibit decomposition at the cathode during discharge and charge due to the presence of reactive reduced O2 species affecting potential, capacity and kinetics on discharge and charge, cyclability and calendar life. Identifying suitable electrolytes is one of the key challenges for the non-aqueous lithium air battery at the present time. Following the realisation that cyclability of such cells in the initially used organic carbonate electrolytes is due to back-to-back irreversible reactions the stability of the non-aqueous electrolytes became a major focus of research on rechargeable lithium air batteries. This realisation led to the establishment of a suite of experimental and computational methods capable of screening the stability of electrolytes. These allow for greater mechanistic understanding of the reactivity and guide the way towards designing more stable systems. A range of electrolytes based on ethers, amides, sulfones, ionic liquids and dimethyl sulfoxide have been investigated. All are more stable than the organic carbonates, but not all are equally stable. Even though it was soon realised, by a number of groups, that ethers exhibit side reactions on discharge and charge, they still remain the choice in many studies. To date dimethyl sulfoxide and dimethylacetamide were identified as the most stable electrolytes. In conjunction with the investigation of electrolyte stability the importance of electrode stability became more prominent. The stability of the electrolyte cannot be considered in isolation. Its stability depends on the synergy between electrolyte and electrode. Carbon based electrodes promote electrolyte decomposition and decompose on their own. Although great progress has been made in only a few years, future work on aprotic electrolytes for Li-O2 batteries will need to explore other electrolytes in the quest for yet lower cost, higher safety, stability and low volatility.}, author = {Freunberger, Stefan Alexander and Chen, Yuhui and Bardé, Fanny and Takechi, Kensuke and Mizuno, Fuminori and Bruce, Peter G.}, booktitle = {The Lithium Air Battery: Fundamentals}, editor = {Imanishi, Nobuyuki and Luntz, Alan C. and Bruce, Peter}, isbn = {9781489980618}, pages = {23--58}, publisher = {Springer Nature}, title = {{Nonaqueous Electrolytes}}, doi = {10.1007/978-1-4899-8062-5_2}, year = {2014}, } @article{7304, abstract = {Lithium-air batteries have received extraordinary attention recently owing to their theoretical gravimetric energies being considerably higher than those of Li-ion batteries. There are, however, significant challenges to practical implementation, including low energy efficiency, cycle life, and power capability. These are due primarily to the lack of fundamental understanding of oxygen reduction and evolution reaction kinetics and parasitic reactions between oxygen redox intermediate species and nominally inactive battery components such as carbon in the oxygen electrode and electrolytes. In this article, we discuss recent advances in the mechanistic understanding of oxygen redox reactions in nonaqueous electrolytes and the search for electrolytes and electrode materials that are chemically stable in the oxygen electrode. In addition, methods to protect lithium metal against corrosion by water and dendrite formation in aqueous lithium-air batteries are discussed. Further materials innovations lie at the heart of research and development efforts that are needed to enable the development of lithium-oxygen batteries with enhanced round-trip efficiency and cycle life.}, author = {Kwabi, D.G. and Ortiz-Vitoriano, N. and Freunberger, Stefan Alexander and Chen, Y. and Imanishi, N. and Bruce, P.G. and Shao-Horn, Y.}, issn = {0883-7694}, journal = {MRS Bulletin}, number = {5}, pages = {443--452}, publisher = {CUP}, title = {{Materials challenges in rechargeable lithium-air batteries}}, doi = {10.1557/mrs.2014.87}, volume = {39}, year = {2014}, } @article{7305, abstract = {When lithium–oxygen batteries discharge, O2 is reduced at the cathode to form solid Li2O2. Understanding the fundamental mechanism of O2 reduction in aprotic solvents is therefore essential to realizing their technological potential. Two different models have been proposed for Li2O2 formation, involving either solution or electrode surface routes. Here, we describe a single unified mechanism, which, unlike previous models, can explain O2 reduction across the whole range of solvents and for which the two previous models are limiting cases. We observe that the solvent influences O2 reduction through its effect on the solubility of LiO2, or, more precisely, the free energy of the reaction LiO2* ⇌ Li(sol)+ + O2−(sol) + ion pairs + higher aggregates (clusters). The unified mechanism shows that low-donor-number solvents are likely to lead to premature cell death, and that the future direction of research for lithium–oxygen batteries should focus on the search for new, stable, high-donor-number electrolytes, because they can support higher capacities and can better sustain discharge.}, author = {Johnson, Lee and Li, Chunmei and Liu, Zheng and Chen, Yuhui and Freunberger, Stefan Alexander and Ashok, Praveen C. and Praveen, Bavishna B. and Dholakia, Kishan and Tarascon, Jean-Marie and Bruce, Peter G.}, issn = {1755-4330}, journal = {Nature Chemistry}, number = {12}, pages = {1091--1099}, publisher = {Springer Nature}, title = {{The role of LiO2 solubility in O2 reduction in aprotic solvents and its consequences for Li–O2 batteries}}, doi = {10.1038/nchem.2101}, volume = {6}, year = {2014}, } @article{7361, abstract = {Bistable switches are fundamental regulatory elements of complex systems, ranging from electronics to living cells. Designed genetic toggle switches have been constructed from pairs of natural transcriptional repressors wired to inhibit one another. The complexity of the engineered regulatory circuits can be increased using orthogonal transcriptional regulators based on designed DNA-binding domains. However, a mutual repressor-based toggle switch comprising DNA-binding domains of transcription-activator-like effectors (TALEs) did not support bistability in mammalian cells. Here, the challenge of engineering a bistable switch based on monomeric DNA-binding domains is solved via the introduction of a positive feedback loop composed of activators based on the same TALE domains as their opposing repressors and competition for the same DNA operator site. This design introduces nonlinearity and results in epigenetic bistability. This principle could be used to employ other monomeric DNA-binding domains such as CRISPR for applications ranging from reprogramming cells to building digital biological memory.}, author = {Lebar, Tina and Bezeljak, Urban and Golob, Anja and Jerala, Miha and Kadunc, Lucija and Pirš, Boštjan and Stražar, Martin and Vučko, Dušan and Zupančič, Uroš and Benčina, Mojca and Forstnerič, Vida and Gaber, Rok and Lonzarić, Jan and Majerle, Andreja and Oblak, Alja and Smole, Anže and Jerala, Roman}, issn = {2041-1723}, journal = {Nature Communications}, number = {1}, publisher = {Springer Nature}, title = {{A bistable genetic switch based on designable DNA-binding domains}}, doi = {10.1038/ncomms6007}, volume = {5}, year = {2014}, } @article{7455, abstract = {The reaction between NiO and (0001)- and ([1\bar102])-oriented Al2O3 single crystals has been investigated on model experimental systems by using the ReflEXAFS technique. Depth-sensitive information is obtained by collecting data above and below the critical angle for total reflection. A systematic protocol for data analysis, based on the recently developed CARD code, was implemented, and a detailed description of the reactive systems was obtained. In particular, for ([1\bar102])-oriented Al2O3, the reaction with NiO is almost complete after heating for 6 h at 1273 K, and an almost uniform layer of spinel is found below a mixed (NiO + spinel) layer at the very upmost part of the sample. In the case of the (0001)-oriented Al2O3, for the same temperature and heating time, the reaction shows a lower advancement degree and a residual fraction of at least 30% NiO is detected in the ReflEXAFS spectra. }, author = {Costanzo, Tommaso and Benzi, Federico and Ghigna, Paolo and Pin, Sonia and Spinolo, Giorgio and d'Acapito, Francesco}, issn = {1600-5775}, journal = {Journal of Synchrotron Radiation}, number = {2}, pages = {395--400}, publisher = {International Union of Crystallography}, title = {{Studying the surface reaction between NiO and Al2O3viatotal reflection EXAFS (ReflEXAFS)}}, doi = {10.1107/s1600577513031299}, volume = {21}, year = {2014}, } @article{7598, author = {Tan, Shutang and Xue, Hong-Wei}, issn = {2211-1247}, journal = {Cell Reports}, number = {5}, pages = {1692--1702}, publisher = {Elsevier}, title = {{Casein kinase 1 regulates ethylene synthesis by phosphorylating and promoting the turnover of ACS5}}, doi = {10.1016/j.celrep.2014.10.047}, volume = {9}, year = {2014}, } @misc{9888, abstract = {Detailed description of the experimental prodedures, data analyses and additional statistical analyses of the results.}, author = {Wolf, Stephan and Mcmahon, Dino and Lim, Ka and Pull, Christopher and Clark, Suzanne and Paxton, Robert and Osborne, Juliet}, publisher = {Public Library of Science}, title = {{Supporting information}}, doi = {10.1371/journal.pone.0103989.s003}, year = {2014}, } @article{9931, abstract = {Gene duplication is important in evolution, because it provides new raw material for evolutionary adaptations. Several existing hypotheses about the causes of duplicate retention and diversification differ in their emphasis on gene dosage, subfunctionalization, and neofunctionalization. Little experimental data exist on the relative importance of gene expression changes and changes in coding regions for the evolution of duplicate genes. Furthermore, we do not know how strongly the environment could affect this importance. To address these questions, we performed evolution experiments with the TEM-1 beta lactamase gene in Escherichia coli to study the initial stages of duplicate gene evolution in the laboratory. We mimicked tandem duplication by inserting two copies of the TEM-1 gene on the same plasmid. We then subjected these copies to repeated cycles of mutagenesis and selection in various environments that contained antibiotics in different combinations and concentrations. Our experiments showed that gene dosage is the most important factor in the initial stages of duplicate gene evolution, and overshadows the importance of point mutations in the coding region.}, author = {Dhar, Riddhiman and Bergmiller, Tobias and Wagner, Andreas}, issn = {1558-5646}, journal = {Evolution}, number = {6}, pages = {1775--1791}, publisher = {Wiley}, title = {{Increased gene dosage plays a predominant role in the initial stages of evolution of duplicate TEM-1 beta lactamase genes}}, doi = {10.1111/evo.12373}, volume = {68}, year = {2014}, } @misc{9932, abstract = {Gene duplication is important in evolution, because it provides new raw material for evolutionary adaptations. Several existing hypotheses about the causes of duplicate retention and diversification differ in their emphasis on gene dosage, sub-functionalization, and neo-functionalization. Little experimental data exists on the relative importance of gene expression changes and changes in coding regions for the evolution of duplicate genes. Furthermore, we do not know how strongly the environment could affect this importance. To address these questions, we performed evolution experiments with the TEM-1 beta lactamase gene in E. coli to study the initial stages of duplicate gene evolution in the laboratory. We mimicked tandem duplication by inserting two copies of the TEM-1 gene on the same plasmid. We then subjected these copies to repeated cycles of mutagenesis and selection in various environments that contained antibiotics in different combinations and concentrations. Our experiments showed that gene dosage is the most important factor in the initial stages of duplicate gene evolution, and overshadows the importance of point mutations in the coding region.}, author = {Dhar, Riddhiman and Bergmiller, Tobias and Wagner, Andreas}, publisher = {Dryad}, title = {{Data from: Increased gene dosage plays a predominant role in the initial stages of evolution of duplicate TEM-1 beta lactamase genes}}, doi = {10.5061/dryad.jc402}, year = {2014}, } @article{348, abstract = {Bi2S3-xTex bulk nanocomposites with crystal domain sizes in the range from 50 nm to 100 nm were obtained from the reaction of Bi2S3 nanorods with Te powder. The thermoelectric properties of the obtained nanocomposites were analysed in the temperature range from 0°C to 300°C. We observed how the thermoelectric properties of the material improved with the annealing temperature, being a spark plasma sintering process needed to maintain the material nanostructuration while maximising its electrical properties. Finally thermoelectric dimensionless figures of merit ZT up to 0.42 were obtained before any charge carrier concentration optimisation. Copyright © 2014 Inderscience Enterprises Ltd. }, author = {Cadavid, Doris and Ibáñez, Maria and Anselmi Tamburini, Umberto and Durá, Oscar and De La Torre, Marco and Cabot, Andreu}, journal = {International Journal of Nanotechnology}, number = {9-11}, pages = {773 -- 784}, publisher = {Inderscience Enterprises Limited }, title = {{Thermoelectric properties of bottom up assembled Bi2S 3-xTex nanocomposites}}, doi = {10.1504/IJNT.2014.063787}, volume = {11}, year = {2014}, } @article{349, abstract = {Thermoelectricity is a key technology with the potential to improve the efficiency of energy conversion processes, which may strongly benefit from advances in the field of nanotechnology. Nanostructured materials are very appealing for thermoelectric applications, but the full development of their potential requires precise control of their properties at the nanoscale. Bottom-up assembly of nanoparticles provides access to a three-dimensional composition control at the nanoscale not attainable in any other technology. In particular, colloidal nanoheterostructures are especially interesting building blocks for the bottom-up production of functional nanomaterials. In the present work, we use PbTe@PbS core-shell nanoparticles as building blocks for the bottom-up production of PbTe-PbS nanocomposites. We used a ligand exchange strategy and a hot press process to promote the electrical conductivity of the nanocomposite and to increase its density. These two approaches allowed us to improve the performance of bottom-up assembled PbTe-PbS bulk nanostructured materials. }, author = {Ortega, Silvia and Ibáñez, Maria and Cadavid, Doris and Cabot, Andreu}, journal = {International Journal of Nanotechnology}, number = {9-11}, pages = {955 -- 970}, publisher = {Inderscience Enterprises Limited }, title = {{Bottom up processing of PbTe PbS thermoelectric nanocomposites}}, doi = {10.1504/IJNT.2014.063802}, volume = {11}, year = {2014}, }