@article{21481, abstract = {The Hα emission line in galaxies is a powerful tracer of their recent star formation activity. With the advent of JWST, we are now able to routinely observe Hα in galaxies at high redshift (z ≳ 3) and thus measure their star formation rates (SFRs). However, using classical SFR(Hα) calibrations to derive the SFRs leads to biased results because high-redshift galaxies are commonly characterized by low metallicities and bursty star formation histories, affecting the conversion factor between the Hα luminosity (LHα) and the SFR. We developed a set of new SFR(Hα) calibrations that allowed us to predict the SFRs of Hα-emitters at z ≳ 3 with very little error. We used the SPHINX cosmological simulations to select a sample of star-forming galaxies representative of the Hα-emitter population observed with JWST. We then derived linear corrections to the classical SFR(Hα) calibrations that took variations in the physical properties (e.g., stellar metallicities) among individual galaxies into account. We obtained two new SFR(Hα) calibrations that compared to the classical calibrations reduce the root mean squared error (RMSE) in the predicted SFRs by ΔRMSE ≈ 0.04 dex and ΔRMSE ≈ 0.06 dex, respectively. Using the recent JWST NIRCam/grism observations of Hα-emitters at z ∼ 6, we show that the new calibrations affect the high-redshift galaxy population statistics: (i) the estimated cosmic SFR density decreases by ΔρSFR ≈ 12%, and (ii) the observed slope of the star formation main sequence increases by Δ∂logSFR/∂logM★ = 0.08 ± 0.02.}, author = {Kramarenko, Ivan and Rosdahl, J. and Blaizot, J. and Matthee, Jorryt J and Katz, H. and Di Cesare, Claudia}, issn = {1432-0746}, journal = {Astronomy & Astrophysics}, publisher = {EDP Sciences}, title = {{H α as a tracer of star formation in the SPHINX cosmological simulations}}, doi = {10.1051/0004-6361/202557114}, volume = {707}, year = {2026}, } @article{21482, abstract = {Controlling the size and shape of assembled structures is a fundamental challenge in self-assembly and is highly relevant in material design and biology. Here, we show that specific but promiscuous short-range binding interactions make it possible to economically assemble linear filaments of user-defined length. Our approach leads to independent control over the mean and width of the filament size distribution and allows us to smoothly explore design trade-offs between assembly quality (spread in size) and cost (number of particle species). We employ a simple hierarchical assembly protocol to minimize assembly times and show that multiple stages of hierarchy make it possible to extend our approach to the assembly of higher-dimensional structures. Our work provides a conceptually simple solution to size control that is applicable to a broad range of systems, from DNA nanoparticles to supramolecular polymers and beyond.}, author = {Hübl, Maximilian and Goodrich, Carl Peter}, issn = {2643-1564}, journal = {Physical Review Research}, publisher = {American Physical Society}, title = {{Entropic size control of self-assembled filaments}}, doi = {10.1103/68rs-3qgn}, volume = {8}, year = {2026}, } @article{21485, abstract = {Insulating oxides are among the most abundant solid materials in the universe1,2,3. Of the many ways in which they influence natural phenomena, perhaps the most consequential is their capacity to transfer electrical charge during contact4,5,6,7,8,9,10—which occurs even between samples of the same oxide—yet the symmetry-breaking parameter that causes this remains unidentified11,12. Here we show that adventitious carbonaceous molecules adsorbed from the environment are the symmetry-breaking factor in same-material oxide contact electrification (CE). We use acoustic levitation to measure charge exchange between a sphere and a plate composed of identical amorphous silicon dioxide (SiO2). Although charging polarity is random for co-prepared samples, we control it with baking or plasma treatment. Observing the charge-exchange relaxation afterwards, we see dynamics over a timescale of hours and connect this directly to the presence of adventitious carbon with time-of-flight mass spectrometry, low-energy ion scattering and infrared spectroscopy. Going further, we confirm that adventitious carbon can even determine charge exchange among different oxides. Our results identify the symmetry-breaking parameter that causes insulating oxides to exchange charge in settings ranging from desert sands4 to volcanic plumes5,6, while simultaneously highlighting an overlooked factor in CE more broadly.}, author = {Grosjean, Galien M and Ostermann, Markus and Sauer, Markus and Hahn, Michael and Pichler, Christian M. and Fahrnberger, Florian and Pertl, Felix and Balazs, Daniel and Link, Mason M. and Kim, Seong H. and Schrader, Devin L. and Blanco, Adriana and Gracia, Francisco and Mujica, Nicolás and Waitukaitis, Scott R}, issn = {1476-4687}, journal = {Nature}, number = {8106}, pages = {626--631}, publisher = {Springer Nature}, title = {{Adventitious carbon breaks symmetry in oxide contact electrification}}, doi = {10.1038/s41586-025-10088-w}, volume = {651}, year = {2026}, } @article{21490, abstract = {Auxin canalization is a self-organizing process that governs the flexible formation of vasculature by reinforcing the formation of auxin transport channels. A key prerequisite is the feedback between auxin signaling and directional auxin transport, mediated by PIN transporters. Despite the developmental importance of canalization, the molecular components linking auxin perception to the regulation of PIN auxin transporters remain poorly understood. Here, we identify TOW, a novel and essential component of auxin canalization that links intracellular auxin signaling with cell surface auxin perception. TOW is regulated downstream of TIR1/AFB-Aux/IAA-WRKY23 transcriptional auxin signaling. tow mutants exhibit defects in regeneration and de novo vasculature formation, along with impaired formation of polarized, PIN-expressing auxin channels. At the subcellular level, these mutants display disrupted auxin-induced PIN polarization and altered PIN endocytic trafficking dynamics. TOW localizes predominantly to the plasma membrane, where it interacts with receptor-like kinases involved in auxin canalization, including the TMK1 auxin co-receptor and the CAMEL-CANAR complex. TOW promotes PIN interaction with these kinases and stabilizes PINs at the cell surface. Together, our findings identify TOW as a molecular link between intracellular and cell surface auxin signaling mechanisms that converge on PIN trafficking and polarity, providing new insights into how auxin signaling regulates directional auxin transport for the self-organizing formation of vasculature during flexible plant development.}, author = {Li, Mingyue and Rydza, Nikola and Mazur, Ewa and Molnar, Gergely and Nodzyński, Tomasz and Friml, Jiří}, issn = {0960-9822}, journal = {Current Biology}, number = {6}, pages = {1468--1480.e6}, publisher = {Elsevier}, title = {{Receptor-like-kinase-interacting protein TOW stabilizes PIN transporters for auxin canalization}}, doi = {10.1016/j.cub.2026.02.023}, volume = {36}, year = {2026}, } @article{21501, abstract = {Kinetically constrained models were originally introduced to capture slow relaxation in glassy systems, where dynamics are hindered by local constraints instead of energy barriers. Their quantum counterparts have recently drawn attention for exhibiting highly degenerate eigenstates at zero energy—known as zero modes—stemming from chiral symmetry. Yet, the structure and implications of these zero modes remain poorly understood. In this work, we focus on the properties of the zero mode subspace in quantum kinetically constrained models with a U(1) particle-conservation symmetry. We use the U(1) East, which lacks inversion symmetry, and the inversion-symmetric U(1) East-West models to illustrate our two main results. First, we observe that the simultaneous presence of constraints and chiral symmetry generally leads to a parametric increase in the number of zero modes due to the fragmentation of the many-body Hilbert space into disconnected sectors. Second, we generalize the concept of compact localized states from single-particle physics and introduce the notion of collective bound states, a special kind of nonergodic eigenstates that are robust to enlarging the system size. We formulate sufficient criteria for their existence, arguing that the degenerate zero mode subspace plays a central role, and demonstrate bound states in both example models and in a two-dimensional model, the U(1) North-East, and in the pairflip model, a system without particle conservation. Our results motivate a systematic study of bound states and their relation to ergodicity breaking, transport, and other properties of quantum kinetically constrained models. }, author = {Nicolau Jimenez, Eulalia and Ljubotina, Marko and Serbyn, Maksym}, issn = {2691-3399}, journal = {PRX Quantum}, publisher = {American Physical Society}, title = {{Fragmentation, zero modes, and collective bound states in constrained models}}, doi = {10.1103/sl79-1xgb}, volume = {7}, year = {2026}, } @article{21503, abstract = {Currently, pharmacogenetics relies on partially annotated star alleles, leaving novel variants and complex haplotypes uninterpretable. Computational scoring frameworks could overcome these limitations. Here, we comprehensively evaluated the ability of existing (CADD, FATHMM-XF, PROVEAN, MutationAssessor, SIFT, PhyloP100, APF, APF2) and novel (PharmGScore and PharmMLScore) variant effect predictors to assess pharmacogenetic alleles in multiple scenarios. Altogether we analyzed 541 PharmVar alleles, high‑throughput CYP2C9 and CYP2C19 mutational maps, and 200 642 UK Biobank exomes linked with health records containing antidepressant treatment outcomes. Many evaluated tools, especially ensemble frameworks, matched or exceeded star allele classifications (ROC‑AUC up to 0.85 for allele definitions, 0.95 in vitro; TPR up to 0.99 for exomes) and accurately predicted severe antidepressant adverse events for carriers of deleterious variants in CYP2C19 (OR 1.20–1.35). Our findings show that computational predictors deliver star allele accuracy while overcoming their limitations. With additional validation, computational tools could enhance clinical decision frameworks by enabling continuous scoring, incorporating previously unknown variants, and providing genome-wide applicability.}, author = {Hajto, Jacek and Piechota, Marcin and Krätschmer, Ilse and Konowalska, Paula and Boyle, Gabriel E. and Fowler, Douglas M. and Borczyk, Malgorzata and Korostynski, Michal}, issn = {1473-1150}, journal = {Pharmacogenomics Journal}, number = {2}, publisher = {Springer Nature}, title = {{Computational variant predictors for pharmacogenomics: From evaluation of single alleles to assessment of adverse drug reactions to antidepressants}}, doi = {10.1038/s41397-026-00399-0}, volume = {26}, year = {2026}, } @article{21509, abstract = {Chromatin remodeling complexes mobilize nucleosomes and promote transcription factor (TF) binding. Using ensemble and single-molecule assays combined with cryo-electron microscopy (cryo-EM), we studied the interaction between pioneer TFs OCT4–SOX2 and the human BRG1/BRM-associated factor (BAF) complex on nucleosomes. BAF engages TF-bound substrates in two orientations, placing OCT4–SOX2 at either the remodeler ENTRY or EXIT site. At the ENTRY site, OCT4–SOX2 initially coexists with BAF without structural interference. However, continued DNA translocation is expected to cause collisions with bound TFs, which can trigger remodeling direction reversals or may induce TF dissociation. To accommodate TFs at the EXIT site, BAF undergoes structural rearrangements, and ensemble assays reveal a nucleosome subpopulation translocating away from TF-binding sites. Moreover, single-molecule experiments show that nucleosome-bound BAF frequently changes remodeling direction, and we identify an ADP-bound remodeler conformation as a potential intermediate. Together, these findings reveal key aspects of the conformational dynamics and remodeling outcomes underlying BAF processing of TF-bound nucleosomes.}, author = {Weiss, Joscha and Vecchia, Luca and Domjan, David and Cavadini, Simone and Sabantsev, Anton and Kempf, Georg and Pathare, Ganesh R. and Brackmann, Klaus and Michael, Alicia and Kater, Lukas and Hietter-Pfeiffer, Eric and Haddawi, Mina and Kuber, Urja P. and Mühlhäusser, Sandra and Grand, Ralph S. and Stadler, Michael B. and Deindl, Sebastian and Thomä, Nicolas H.}, issn = {1097-2765}, journal = {Molecular Cell}, number = {4}, pages = {625--639.e8}, publisher = {Elsevier}, title = {{The human BAF chromatin remodeler processes nucleosomes bound by pioneer transcription factors OCT4–SOX2}}, doi = {10.1016/j.molcel.2026.01.021}, volume = {86}, year = {2026}, } @article{21532, abstract = {Recent research in nanophotonics for scintillation-based imaging has demonstrated promising improvements in scintillator performance. In parallel, advances in nanophotonics have enabled wavefront control through metasurfaces, a capability that has transformed fields such as microscopy by allowing tailored control of optical propagation. This naturally raises the following question, which we address in this Perspective: can wavefront-control strategies be leveraged to improve scintillation-based imaging? To answer this question, we explore nanophotonic- and metasurface-enabled wavefront control in scintillators to mitigate image blurring arising from their intrinsically diffuse light emission. While depth-of-field extension in scintillation faces fundamental limitations absent in microscopy, this approach reveals promising avenues, including stacked scintillators, selective spatial-frequency enhancement, and X-ray energy-dependent imaging. These results clarify the key distinctions in adapting wavefront engineering to scintillation and its potential to enable tailored detection strategies.}, author = {Chen, Joshua and Vaidya, Sachin and Pajovic, Simo and Choi, Seou and Michaels, William and Martin-Monier, Louis and Hu, Juejun and Cogswell, Carol and Roques-Carmes, Charles and Soljačić, Marin}, issn = {2330-4022}, journal = {ACS Photonics}, number = {7}, pages = {1757–1766}, publisher = {American Chemical Society}, title = {{Wavefront engineering for scintillation-based imaging}}, doi = {10.1021/acsphotonics.5c03124}, volume = {13}, year = {2026}, } @article{21537, abstract = {Nanophotonics has revolutionized the control of light-matter interactions in various fields of fundamental science and technology. In this work, we propose Implosion Fabrication (ImpFab) as a versatile nanophotonics fabrication platform providing the highest spatial resolution, material versatility, and full volumetric control. ImpFab uniquely combines top-down lithography with bottom-up nanoparticle assembly within a hydrogel scaffold, enabling precise control over optical material properties, such as refractive index, by adjusting printing parameters. We showcase the potential of ImpFab by fabricating three-dimensional photonic crystals and quasicrystals, as well as demonstrating optical structures with spatially modulated unit cell material properties. Our results highlight the potential of ImpFab in producing nanostructures with tailored optical functionalities, which are crucial for applications in sensing, imaging, and information processing, and opening new avenues in developing non-Hermitian photonic systems with spatially controlled gain and loss.}, author = {Salamin, Yannick and Yang, Gaojie and Mills, Brian and Grossi Fonseca, André and Roques-Carmes, Charles and Yang, Quansan and Beroz, Justin and Kooi, Steven E. and de Miguel Comella, Marc and Mak, Kiran and Vaidya, Sachin and Oran, Daniel and Swain, Corban and Sun, Yi and Maayani, Shai and Sloan, Jamison and Amin Elfadil Elawad, Amel and Lopez, Josue J. and Boyden, Edward S. and Soljačić, Marin}, issn = {2047-7538}, journal = {Light: Science & Applications}, publisher = {Springer Nature}, title = {{Three-dimensional nanophotonics with spatially modulated optical properties}}, doi = {10.1038/s41377-025-02166-5}, volume = {15}, year = {2026}, } @article{21555, abstract = {Spin-polarized electron beam sources enable studies of spin-dependent electric and magnetic effects at the nanoscale. We propose a method of creating spin-polarized electrons on an integrated photonics chip by laser-driven nanophotonic fields. A two-stage interaction separated by a free-space drift length is proposed, where the first stage and drift length introduces spin-dependent characteristics into the probability distribution of the electron wave function. The second stage uses an adjusted optical near field to rotate the spin states utilizing the spin-dependent wave-packet distribution to produce electrons with high ensemble average spin expectation values. This platform provides an integrated and compact method to generate spin-polarized electrons, implementable with millimeter scale chips and tabletop lasers.}, author = {Woodahl, Clarisse and Murillo, Melanie and Roques-Carmes, Charles and Karnieli, Aviv and Miller, David A. B. and Solgaard, Olav}, issn = {1079-7114}, journal = {Physical Review Letters}, number = {6}, publisher = {American Physical Society}, title = {{On-chip laser-driven free-electron spin polarizer}}, doi = {10.1103/3c1m-d3hh}, volume = {136}, year = {2026}, } @inproceedings{21581, abstract = {We demonstrate that nanophotonic scintillators based on three-dimensional (3D) photonic crystals can overcome the longstanding tradeoff between spatial resolution and light yield in X-ray imaging. By engineering supercollimation, which is light propagation without angular spreading, within the emission spectrum, we strongly shape the angular emission profile of the scintillator, dramatically reducing blurring at large thicknesses. Our theoretical and numerical results, using realistic scintillator and photonic crystal parameters, show that this improves the Detector Quantum Efficiency (DQE) by up to several orders of magnitude at high spatial frequencies, enabling sharper images and reduced X-ray dosages. This approach offers a new path toward high-resolution, low-dose X-ray imaging systems.}, author = {Vaidya, Sachin and Choi, Seou and Roques-Carmes, Charles and Soljačić, Marin}, booktitle = {High Contrast Metastructures XV}, location = {San Francisco, CA, United States}, publisher = {SPIE}, title = {{Supercollimating photonic crystal scintillators}}, doi = {10.1117/12.3079431}, volume = {PC13910}, year = {2026}, } @article{21583, abstract = {Non-Hermiticity naturally arises in physical systems that exchange energy with their environment. The presence of non-Hermiticity leads to many topological physics phenomena and device applications. In the non-Hermitian energy band theory, the foundation of these physics and applications, both energies and wave vectors take complex values. The energy bands thus become a Riemann surface, and such an energy-band Riemann surface underlies all important signatures of non-Hermitian topology. Despite a long history and recent theoretical interests, the energy-band Riemann surface has not been experimentally studied. Here, we provide a photonic observation of the energy-band Riemann surface of a non-Hermitian system. This is achieved by a tunable imaginary gauge transformation in photonic synthetic frequency dimensions. From measured topologies of the Riemann surface, we reveal the complex-energy winding, the open-boundary-condition spectrum, the generalized Brillouin zone, and the branch points. Our findings demonstrate a unified framework in the studies of diverse effects in non-Hermitian topological physics through an experimental observation of energy-band Riemann surfaces.}, author = {Cheng, Dali and Wang, Heming and Zhong, Janet and Lustig, Eran and Roques-Carmes, Charles and Fan, Shanhui}, issn = {2375-2548}, journal = {Science Advances}, number = {12}, publisher = {American Association for the Advancement of Science}, title = {{Experimental observation of energy-band Riemann surface}}, doi = {10.1126/sciadv.aec8239}, volume = {12}, year = {2026}, } @phdthesis{21651, abstract = {Blockchains enable distributed consensus in permissionless settings, where participants are unknown, dynamically changing, and do not trust each other. While Bitcoin, based on Proof-of-Work (PoW), was the first protocol in this model, significant research has focused on permissionless protocols using alternative physical resources, specifically Proof-of-Space (PoSpace) and Verifiable Delay Functions (VDFs). This thesis investigates the theoretical limits and design space of longest-chain protocols in the fully permissionless and dynamically available settings using these three resources. First, we address the feasibility of blockchains relying solely on storage as a resource. We prove a fundamental impossibility result: there exists no secure longest-chain protocol based exclusively on Proof-of-Space in the fully permissionless or dynamically available settings. Further, we quantify the adversarial capabilities required to execute a double-spend attack. Our result formally justifies the necessity of coupling PoSpace with time-dependent primitives (such as VDFs) or to move to less permissive settings (quasi-permissionless or permissioned) to ensure security. Second, we generalize Nakamoto-like heaviest chain consensus to protocols utilizing combinations of multiple physical resources. We analyze chain selection rules governed by a weight function Γ(S, V,W), which assigns weight to blocks based on recorded Space (S), VDF speed (V ), and Work (W). We provide a complete classification of secure weight functions, proving that a weight function is secure against private double-spend attacks if and only if it is homogeneous in the timed resources (V,W) and sub-homogeneous in S. This framework unifies existing protocols like Bitcoin and Chia under a single theoretical model and provides a powerful tool for designing new longest-chain blockchains from a mix of physical resources.}, author = {Baig, Mirza Ahad}, isbn = {978-3-99078-078-7}, issn = {2663-337X}, publisher = {Institute of Science and Technology Austria}, title = {{On secure chain selection rules from physical resources in a permissionless setting}}, doi = {10.15479/AT-ISTA-21651}, year = {2026}, } @article{21657, abstract = {We compare three global kilometer-scale models (ICON, IFS and NICAM) to clarify the advantages and challenges of high-resolution global weather and climate modeling, using different approaches to represent convection, from fully parameterized to fully explicit. Our analysis focuses on tropical precipitation characteristics spanning a wide range of spatio-temporal scales—including the diurnal cycle, extreme precipitation, convective organization, and the Madden-Julian Oscillation (MJO)—along with interactions between convection and the thermodynamic environment. All three models commonly show weaker convective organization with smaller precipitation cells than observed, though the strength of the bias varies by model. This diversity is introduced by differences in the representation of (a) convective initiation affected by the convective sensitivity to moisture and (b) tropospheric moistening associated with deep convection. Models with stronger thermodynamic-convection coupling increase environmental moisture near convection, thereby enhancing convective organization. This has important upscale effects on the MJO; while IFS and NICAM capture its eastward propagation well, ICON has difficulty reproducing it. The amplitudes and phases of precipitation diurnal cycles over land show much greater disagreement among the models than over ocean, influenced by how convection is initiated. Biases in rain evaporation and cold pool formation hinder the propagation of mesoscale convection, leading to errors such as the misrepresentation of nocturnal convection moving off the coast of Sumatra in IFS and ICON. These results highlight the importance of thermodynamic-convection coupling in realistically simulating tropical convection across scales. To improve this coupling, kilometer-scale models require better representation of the interaction between resolved convection and three-dimensional turbulent mixing.}, author = {Takasuka, Daisuke and Becker, Tobias and Bao, Jiawei}, issn = {1942-2466}, journal = {Journal of Advances in Modeling Earth Systems}, number = {3}, publisher = {Wiley}, title = {{Precipitation characteristics and thermodynamic-convection coupling in global kilometer-scale simulations}}, doi = {10.1029/2025MS005343}, volume = {18}, year = {2026}, } @article{21660, abstract = {Kapitza-Dirac scattering, the diffraction of matter waves from a standing light field, is widely utilized in ultracold gases, but its behavior in the strongly interacting regime is an open question. Here, we develop a numerically exact two-body description of Kapitza-Dirac scattering for two contact-interacting atoms in a one-dimensional harmonic trap subjected to a pulsed optical lattice, enabling us to obtain the numerically exact dynamics. We map how interaction strength, lattice depth, lattice wave number, and pulse duration reshape the diffraction pattern, leading to an interaction-dependent population redistribution in real and momentum space. By comparing the exact dynamics to an impulsive sudden-approximation description, we delineate the parameter regimes where it remains accurate and those, notably at strong attraction and small lattice wave number, where it fails. Our results provide a controlled few-body benchmark for interacting Kapitza-Dirac scattering and quantitative guidance for Kapitza-Dirac-based probes of ultracold atomic systems.}, author = {Becker, A. and Koutentakis, Georgios and Schmelcher, P.}, issn = {2643-1564}, journal = {Physical Review Research}, publisher = {American Physical Society}, title = {{Two-body Kapitza-Dirac scattering of one-dimensional ultracold atoms}}, doi = {10.1103/rdsn-stlq}, volume = {8}, year = {2026}, } @article{21661, abstract = {Model checking undiscounted reachability and expected-reward properties on Markov decision processes (MDPs) are key for the verification of systems that act under uncertainty. Popular algorithms are policy iteration and variants of value iteration; in tool competitions, most participants rely on the latter. These algorithms generally need worst-case exponential time. However, the problem can equally be formulated as a linear programme, solvable in polynomial time. In this paper, we give a detailed overview of today’s state-of-the-art algorithms for MDP model checking with a focus on performance and correctness. We highlight their fundamental differences, and describe various optimizations and implementation variants. We experimentally compare floating-point and exact-arithmetic implementations of all algorithms on three benchmark sets using two probabilistic model checkers. Our results show that (optimistic) value iteration is a sensible default, but other algorithms are preferable in specific settings. This paper thereby provides a guide for MDP verification practitioners—tool builders and users alike.}, author = {Hartmanns, Arnd and Junges, Sebastian and Quatmann, Tim and Weininger, Maximilian}, issn = {1433-2787}, journal = {International Journal on Software Tools for Technology Transfer}, keywords = {Quantitative model checking, Markov decision process, Linear programming, Value iteration, Policy iteration}, publisher = {Springer Nature}, title = {{The revised practitioner’s guide to MDP model checking algorithms}}, doi = {10.1007/s10009-026-00848-y}, year = {2026}, } @unpublished{21699, abstract = {Recent research in nanophotonics for scintillation-based imaging has demonstrated promising improvements in scintillator performance. In parallel, advances in nanophotonics have enabled wavefront control through metasurfaces, a capability that has transformed fields such as microscopy by allowing tailored control of optical propagation. This naturally raises the following question, which we address in this perspective: can wavefront-control strategies be leveraged to improve scintillation-based imaging? To answer this question, we explore nanophotonic- and metasurface-enabled wavefront control in scintillators to mitigate image blurring arising from their intrinsically diffuse light emission. While depth-of-field extension in scintillation faces fundamental limitations absent in microscopy, this approach reveals promising avenues, including stacked scintillators, selective spatial-frequency enhancement, and X-ray energy-dependent imaging. These results clarify the key distinctions in adapting wavefront engineering to scintillation and its potential to enable tailored detection strategies.}, author = {Chen, Joshua and Vaidya, Sachin and Pajovic, Simo and Choi, Seou and Michaels, William and Louis Martin-Monier, Louis Martin-Monier and Hu, Juejun and Cogswell, Carol and Roques-Carmes, Charles and Soljačić, Marin}, booktitle = {arXiv}, title = {{Wavefront engineering for scintillation-based imaging}}, doi = {10.48550/arXiv.2601.09830}, year = {2026}, } @unpublished{21700, abstract = {We provide a theoretical framework to describe the dynamics of a free-electron beam interacting with quantized bound systems in arbitrary electromagnetic environments. This expands the quantum optics toolbox to incorporate free-electron beams for applications in highly tunable quantum control, imaging, and spectroscopy at the nanoscale. The framework recovers previously studied results and shows that electromagnetic environments can amplify the intrinsically weak coupling between a free-electron and a bound electron to reach previously inaccessible interaction regimes. We leverage this enhanced coupling for experimentally feasible protocols in coherent qubit control and towards the nondestructive readout and projective control of the electron beam's quantum-number statistics. Our framework is broadly applicable to microwave-frequency qubits, optical nanophotonics, cavity quantum electrodynamics, and emerging platforms at the interface of electron microscopy and quantum information.}, author = {Grzesik, Jakob M. and Karnieli, Aviv and Roques-Carmes, Charles and Black, Dylan S. and Lê, Trung Kiên and Solgaard, Olav and Fan, Shanhui and Vučković, Jelena}, booktitle = {arXiv}, title = {{A general framework for interactions between electron beams and quantum optical systems}}, doi = {10.48550/arXiv.2601.21385}, year = {2026}, } @unpublished{21701, abstract = {Polarization-resolved control and measurement of the optical field are essential for a wide range of photonic systems, including coherent communication, polarimetric sensing, and quantum information processing. We present a photonic integrated circuit that enables the generation and analysis of arbitrary polarization states. The device provides reconfigurable access to the full polarization degree of freedom of coherent light within a single integrated platform. We experimentally demonstrate arbitrary polarization state generation spanning the Poincare sphere, as well as Stokes vector measurement on chip. Unlike conventional Stokes measurements that rely on direct detection, polarization analysis utilizing this architecture is intrinsically non-destructive, preserving the optical signal for further optical domain processing. The devices are fabricated in a commercial foundry using CMOS-compatible processes, enabling scalable and reproducible integration. By combining polarization generation and analysis in a compact and stable photonic circuit, this work eliminates the need for external polarization optics and provides a foundation for robust, polarization-enabled photonic integrated systems.}, author = {Valdez, Carson G. and Kroo, Anne R. and Miller, Anna J. and Roques-Carmes, Charles and Miller, David A. B. and Solgaard, Olav}, booktitle = {arXiv}, title = {{Integrated photonic polarization synthesizer and analyzer}}, doi = {10.48550/arXiv.2602.17024}, year = {2026}, } @unpublished{21703, abstract = {Altermagnetism has recently emerged as a distinct class of collinear antiferromagnets that break time-reversal symmetry, exhibiting a host of novel properties. Applied strain has attracted particular attention as a key tuning parameter for altermagnets. Although several experimental studies have demonstrated the preparation of single-domain states through a combination of applied strain and magnetic field, the route to such states remains unclear. Here, we use magneto-optical measurements on single crystals of MnTe under applied strain to show that, in contrast to previous reports, strain acts primarily to rotate the Néel vector L continuously. Since the orientation of L determines the magnetic point group symmetry, this continuous rotation effectively tunes the symmetry and its associated physical properties. Furthermore, we demonstrate that built-in strain in free-standing crystals is sufficient to pin L into continuous textures over millimeter length scales. Together, these results provide guidance for future device design and open the door to leveraging the Néel vector orientation as a tunable degree of freedom in spintronic applications.}, author = {Alex Liebman-Peláez, Alex Liebman-Peláez and Kruppe, Jon and Regmi, Resham Babu and Ghimire, Nirmal J. and Sun, Yue and Mazin, Igor I. and Noad, Hilary M. L. and Analytis, James and Sunko, Veronika and Orenstein, Joseph}, booktitle = {arXiv}, title = {{Strain continuously rotates the Néel vector in altermagnetic MnTe}}, doi = {10.48550/arXiv.2604.07653}, year = {2026}, }