---
_id: '12638'
abstract:
- lang: eng
text: Central Asian water resources largely depend on melt water generated in the
Pamir and Tien Shan mountain ranges. To estimate future water availability in
this region, it is necessary to use climate projections to estimate the future
glacier extent and volume. In this study, we evaluate the impact of uncertainty
in climate change projections on the future glacier extent in the Amu and Syr
Darya river basins. To this end we use the latest climate change projections generated
for the upcoming IPCC report (CMIP5) and, for comparison, projections used in
the fourth IPCC assessment (CMIP3). With these projections we force a regionalized
glacier mass balance model, and estimate changes in the basins' glacier extent
as a function of the glacier size distribution in the basins and projected temperature
and precipitation. This glacier mass balance model is specifically developed for
implementation in large scale hydrological models, where the spatial resolution
does not allow for simulating individual glaciers and data scarcity is an issue.
Although the CMIP5 ensemble results in greater regional warming than the CMIP3
ensemble and the range in projections for temperature as well as precipitation
is wider for the CMIP5 than for the CMIP3, the spread in projections of future
glacier extent in Central Asia is similar for both ensembles. This is because
differences in temperature rise are small during periods of maximum melt (July–September)
while differences in precipitation change are small during the period of maximum
accumulation (October–February). However, the model uncertainty due to parameter
uncertainty is high, and has roughly the same importance as uncertainty in the
climate projections. Uncertainty about the size of the decline in glacier extent
remains large, making estimates of future Central Asian glacier evolution and
downstream water availability uncertain.
article_processing_charge: No
article_type: original
author:
- first_name: A. F.
full_name: Lutz, A. F.
last_name: Lutz
- first_name: W. W.
full_name: Immerzeel, W. W.
last_name: Immerzeel
- first_name: A.
full_name: Gobiet, A.
last_name: Gobiet
- first_name: Francesca
full_name: Pellicciotti, Francesca
id: b28f055a-81ea-11ed-b70c-a9fe7f7b0e70
last_name: Pellicciotti
- first_name: M. F. P.
full_name: Bierkens, M. F. P.
last_name: Bierkens
citation:
ama: Lutz AF, Immerzeel WW, Gobiet A, Pellicciotti F, Bierkens MFP. Comparison of
climate change signals in CMIP3 and CMIP5 multi-model ensembles and implications
for Central Asian glaciers. Hydrology and Earth System Sciences. 2013;17(9):3661-3677.
doi:10.5194/hess-17-3661-2013
apa: Lutz, A. F., Immerzeel, W. W., Gobiet, A., Pellicciotti, F., & Bierkens,
M. F. P. (2013). Comparison of climate change signals in CMIP3 and CMIP5 multi-model
ensembles and implications for Central Asian glaciers. Hydrology and Earth
System Sciences. Copernicus GmbH. https://doi.org/10.5194/hess-17-3661-2013
chicago: Lutz, A. F., W. W. Immerzeel, A. Gobiet, Francesca Pellicciotti, and M.
F. P. Bierkens. “Comparison of Climate Change Signals in CMIP3 and CMIP5 Multi-Model
Ensembles and Implications for Central Asian Glaciers.” Hydrology and Earth
System Sciences. Copernicus GmbH, 2013. https://doi.org/10.5194/hess-17-3661-2013.
ieee: A. F. Lutz, W. W. Immerzeel, A. Gobiet, F. Pellicciotti, and M. F. P. Bierkens,
“Comparison of climate change signals in CMIP3 and CMIP5 multi-model ensembles
and implications for Central Asian glaciers,” Hydrology and Earth System Sciences,
vol. 17, no. 9. Copernicus GmbH, pp. 3661–3677, 2013.
ista: Lutz AF, Immerzeel WW, Gobiet A, Pellicciotti F, Bierkens MFP. 2013. Comparison
of climate change signals in CMIP3 and CMIP5 multi-model ensembles and implications
for Central Asian glaciers. Hydrology and Earth System Sciences. 17(9), 3661–3677.
mla: Lutz, A. F., et al. “Comparison of Climate Change Signals in CMIP3 and CMIP5
Multi-Model Ensembles and Implications for Central Asian Glaciers.” Hydrology
and Earth System Sciences, vol. 17, no. 9, Copernicus GmbH, 2013, pp. 3661–77,
doi:10.5194/hess-17-3661-2013.
short: A.F. Lutz, W.W. Immerzeel, A. Gobiet, F. Pellicciotti, M.F.P. Bierkens, Hydrology
and Earth System Sciences 17 (2013) 3661–3677.
date_created: 2023-02-20T08:17:05Z
date_published: 2013-09-01T00:00:00Z
date_updated: 2023-02-24T08:19:48Z
day: '01'
doi: 10.5194/hess-17-3661-2013
extern: '1'
intvolume: ' 17'
issue: '9'
keyword:
- General Earth and Planetary Sciences
- General Engineering
- General Environmental Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.5194/hess-17-3661-2013
month: '09'
oa: 1
oa_version: Published Version
page: 3661-3677
publication: Hydrology and Earth System Sciences
publication_identifier:
issn:
- 1607-7938
publication_status: published
publisher: Copernicus GmbH
quality_controlled: '1'
scopus_import: '1'
status: public
title: Comparison of climate change signals in CMIP3 and CMIP5 multi-model ensembles
and implications for Central Asian glaciers
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 17
year: '2013'
...
---
_id: '12639'
abstract:
- lang: eng
text: 'In the headwater catchments of the main Asian rivers, glaciohydrological
models are a useful tool to anticipate impacts of climatic changes. However, the
reliability of their projections strongly depends on the quality and quantity
of data that are available for parameter estimation, model calibration and validation,
as well as on the accuracy of climate change projections. In this study the physically
oriented, glaciohydrological model TOPKAPI-ETH is used to simulate future changes
in snow, glacier, and runoff from the Hunza River Basin in northern Pakistan.
Three key sources of model uncertainty in future runoff projections are compared:
model parameters, climate projections, and natural climate variability. A novel
approach, applicable also to ungauged catchments, is used to determine which model
parameters and model components significantly affect the overall model uncertainty.
We show that the model is capable of reproducing streamflow and glacier mass balances,
but that all analyzed sources of uncertainty significantly affect the reliability
of future projections, and that their effect is variable in time and in space.
The effect of parametric uncertainty often exceeds the impact of climate uncertainty
and natural climate variability, especially in heavily glacierized subcatchments.
The results of the uncertainty analysis allow detailed recommendations on network
design and the timing and location of field measurements, which could efficiently
help to reduce model uncertainty in the future.'
article_processing_charge: No
article_type: original
author:
- first_name: S.
full_name: Ragettli, S.
last_name: Ragettli
- first_name: Francesca
full_name: Pellicciotti, Francesca
id: b28f055a-81ea-11ed-b70c-a9fe7f7b0e70
last_name: Pellicciotti
- first_name: R.
full_name: Bordoy, R.
last_name: Bordoy
- first_name: W. W.
full_name: Immerzeel, W. W.
last_name: Immerzeel
citation:
ama: Ragettli S, Pellicciotti F, Bordoy R, Immerzeel WW. Sources of uncertainty
in modeling the glaciohydrological response of a Karakoram watershed to climate
change. Water Resources Research. 2013;49(9):6048-6066. doi:10.1002/wrcr.20450
apa: Ragettli, S., Pellicciotti, F., Bordoy, R., & Immerzeel, W. W. (2013).
Sources of uncertainty in modeling the glaciohydrological response of a Karakoram
watershed to climate change. Water Resources Research. American Geophysical
Union. https://doi.org/10.1002/wrcr.20450
chicago: Ragettli, S., Francesca Pellicciotti, R. Bordoy, and W. W. Immerzeel. “Sources
of Uncertainty in Modeling the Glaciohydrological Response of a Karakoram Watershed
to Climate Change.” Water Resources Research. American Geophysical Union,
2013. https://doi.org/10.1002/wrcr.20450.
ieee: S. Ragettli, F. Pellicciotti, R. Bordoy, and W. W. Immerzeel, “Sources of
uncertainty in modeling the glaciohydrological response of a Karakoram watershed
to climate change,” Water Resources Research, vol. 49, no. 9. American
Geophysical Union, pp. 6048–6066, 2013.
ista: Ragettli S, Pellicciotti F, Bordoy R, Immerzeel WW. 2013. Sources of uncertainty
in modeling the glaciohydrological response of a Karakoram watershed to climate
change. Water Resources Research. 49(9), 6048–6066.
mla: Ragettli, S., et al. “Sources of Uncertainty in Modeling the Glaciohydrological
Response of a Karakoram Watershed to Climate Change.” Water Resources Research,
vol. 49, no. 9, American Geophysical Union, 2013, pp. 6048–66, doi:10.1002/wrcr.20450.
short: S. Ragettli, F. Pellicciotti, R. Bordoy, W.W. Immerzeel, Water Resources
Research 49 (2013) 6048–6066.
date_created: 2023-02-20T08:17:12Z
date_published: 2013-03-01T00:00:00Z
date_updated: 2023-02-24T08:16:19Z
day: '01'
doi: 10.1002/wrcr.20450
extern: '1'
intvolume: ' 49'
issue: '9'
keyword:
- Water Science and Technology
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1002/wrcr.20450
month: '03'
oa: 1
oa_version: Published Version
page: 6048-6066
publication: Water Resources Research
publication_identifier:
issn:
- 0043-1397
publication_status: published
publisher: American Geophysical Union
quality_controlled: '1'
scopus_import: '1'
status: public
title: Sources of uncertainty in modeling the glaciohydrological response of a Karakoram
watershed to climate change
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 49
year: '2013'
...
---
_id: '12640'
abstract:
- lang: eng
text: Greater Himalayan glaciers are retreating and losing mass at rates comparable
to glaciers in other regions of the world1,2,3,4,5. Assessments of future changes
and their associated hydrological impacts are scarce, oversimplify glacier dynamics
or include a limited number of climate models6,7,8,9. Here, we use results from
the latest ensemble of climate models in combination with a high-resolution glacio-hydrological
model to assess the hydrological impact of climate change on two climatically
contrasting watersheds in the Greater Himalaya, the Baltoro and Langtang watersheds
that drain into the Indus and Ganges rivers, respectively. We show that the largest
uncertainty in future runoff is a result of variations in projected precipitation
between climate models. In both watersheds, strong, but highly variable, increases
in future runoff are projected and, despite the different characteristics of the
watersheds, their responses are surprisingly similar. In both cases, glaciers
will recede but net glacier melt runoff is on a rising limb at least until 2050.
In combination with a positive change in precipitation, water availability during
this century is not likely to decline. We conclude that river basins that depend
on monsoon rains and glacier melt will continue to sustain the increasing water
demands expected in these areas10.
article_processing_charge: No
article_type: letter_note
author:
- first_name: W. W.
full_name: Immerzeel, W. W.
last_name: Immerzeel
- first_name: Francesca
full_name: Pellicciotti, Francesca
id: b28f055a-81ea-11ed-b70c-a9fe7f7b0e70
last_name: Pellicciotti
- first_name: M. F. P.
full_name: Bierkens, M. F. P.
last_name: Bierkens
citation:
ama: Immerzeel WW, Pellicciotti F, Bierkens MFP. Rising river flows throughout the
twenty-first century in two Himalayan glacierized watersheds. Nature Geoscience.
2013;6(9):742-745. doi:10.1038/ngeo1896
apa: Immerzeel, W. W., Pellicciotti, F., & Bierkens, M. F. P. (2013). Rising
river flows throughout the twenty-first century in two Himalayan glacierized watersheds.
Nature Geoscience. Springer Nature. https://doi.org/10.1038/ngeo1896
chicago: Immerzeel, W. W., Francesca Pellicciotti, and M. F. P. Bierkens. “Rising
River Flows throughout the Twenty-First Century in Two Himalayan Glacierized Watersheds.”
Nature Geoscience. Springer Nature, 2013. https://doi.org/10.1038/ngeo1896.
ieee: W. W. Immerzeel, F. Pellicciotti, and M. F. P. Bierkens, “Rising river flows
throughout the twenty-first century in two Himalayan glacierized watersheds,”
Nature Geoscience, vol. 6, no. 9. Springer Nature, pp. 742–745, 2013.
ista: Immerzeel WW, Pellicciotti F, Bierkens MFP. 2013. Rising river flows throughout
the twenty-first century in two Himalayan glacierized watersheds. Nature Geoscience.
6(9), 742–745.
mla: Immerzeel, W. W., et al. “Rising River Flows throughout the Twenty-First Century
in Two Himalayan Glacierized Watersheds.” Nature Geoscience, vol. 6, no.
9, Springer Nature, 2013, pp. 742–45, doi:10.1038/ngeo1896.
short: W.W. Immerzeel, F. Pellicciotti, M.F.P. Bierkens, Nature Geoscience 6 (2013)
742–745.
date_created: 2023-02-20T08:17:17Z
date_published: 2013-09-13T00:00:00Z
date_updated: 2023-02-21T10:46:37Z
day: '13'
doi: 10.1038/ngeo1896
extern: '1'
intvolume: ' 6'
issue: '9'
keyword:
- General Earth and Planetary Sciences
language:
- iso: eng
month: '09'
oa_version: None
page: 742-745
publication: Nature Geoscience
publication_identifier:
eissn:
- 1752-0908
issn:
- 1752-0894
publication_status: published
publisher: Springer Nature
quality_controlled: '1'
scopus_import: '1'
status: public
title: Rising river flows throughout the twenty-first century in two Himalayan glacierized
watersheds
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 6
year: '2013'
...
---
_id: '12641'
abstract:
- lang: eng
text: We investigate the sensitivity of a distributed enhanced temperature-index
(ETI) melt model, in order to understand which parameters have the largest influence
on model outputs and thus need to be accurately known. We use melt and meteorological
data from two Alpine glaciers and one glacier in the Andes of Chile. Sensitivity
analysis is conducted in a systematic way in terms of parameters and the different
conditions (day, night, clear-sky, overcast), melt seasons and glaciers examined.
The sensitivity of total melt to changes in individual parameters is calculated
using a local method around the optimal value of the parameters. We verify that
the parameters are optimal at the distributed scale and assess the model uncertainty
induced by uncertainty in the parameters using a Monte Carlo technique. Model
sensitivity to parameters is consistent across melt seasons, glaciers, different
conditions and the daily statistics examined. The parameters to which the model
is most sensitive are the shortwave-radiation factor, the temperature lapse rate
for extrapolation of air temperature, the albedo parameters, the temperature threshold
and the cloud transmittance factor parameters. A parameter uncertainty of 5% results
in a model uncertainty of 5.6% of mean melt on Haut Glacier d’Arolla, Switzerland.
article_processing_charge: No
article_type: original
author:
- first_name: Martin
full_name: Heynen, Martin
last_name: Heynen
- first_name: Francesca
full_name: Pellicciotti, Francesca
id: b28f055a-81ea-11ed-b70c-a9fe7f7b0e70
last_name: Pellicciotti
- first_name: Marco
full_name: Carenzo, Marco
last_name: Carenzo
citation:
ama: Heynen M, Pellicciotti F, Carenzo M. Parameter sensitivity of a distributed
enhanced temperature-index melt model. Annals of Glaciology. 2013;54(63):311-321.
doi:10.3189/2013aog63a537
apa: Heynen, M., Pellicciotti, F., & Carenzo, M. (2013). Parameter sensitivity
of a distributed enhanced temperature-index melt model. Annals of Glaciology.
International Glaciological Society. https://doi.org/10.3189/2013aog63a537
chicago: Heynen, Martin, Francesca Pellicciotti, and Marco Carenzo. “Parameter Sensitivity
of a Distributed Enhanced Temperature-Index Melt Model.” Annals of Glaciology.
International Glaciological Society, 2013. https://doi.org/10.3189/2013aog63a537.
ieee: M. Heynen, F. Pellicciotti, and M. Carenzo, “Parameter sensitivity of a distributed
enhanced temperature-index melt model,” Annals of Glaciology, vol. 54,
no. 63. International Glaciological Society, pp. 311–321, 2013.
ista: Heynen M, Pellicciotti F, Carenzo M. 2013. Parameter sensitivity of a distributed
enhanced temperature-index melt model. Annals of Glaciology. 54(63), 311–321.
mla: Heynen, Martin, et al. “Parameter Sensitivity of a Distributed Enhanced Temperature-Index
Melt Model.” Annals of Glaciology, vol. 54, no. 63, International Glaciological
Society, 2013, pp. 311–21, doi:10.3189/2013aog63a537.
short: M. Heynen, F. Pellicciotti, M. Carenzo, Annals of Glaciology 54 (2013) 311–321.
date_created: 2023-02-20T08:17:21Z
date_published: 2013-08-01T00:00:00Z
date_updated: 2023-02-21T10:43:42Z
day: '01'
doi: 10.3189/2013aog63a537
extern: '1'
intvolume: ' 54'
issue: '63'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.3189/2013aog63a537
month: '08'
oa: 1
oa_version: Published Version
page: 311-321
publication: Annals of Glaciology
publication_identifier:
eissn:
- 1727-5644
issn:
- 0260-3055
publication_status: published
publisher: International Glaciological Society
quality_controlled: '1'
scopus_import: '1'
status: public
title: Parameter sensitivity of a distributed enhanced temperature-index melt model
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 54
year: '2013'
...
---
_id: '12642'
abstract:
- lang: eng
text: Near-surface air temperature, typically measured at a height of 2 m, is the
most important control on the energy exchange and the melt rate at a snow or ice
surface. It is distributed in a simplistic manner in most glacier melt models
by using constant linear lapse rates, which poorly represent the actual spatial
and temporal variability of air temperature. In this paper, we test a simple thermodynamic
model proposed by Greuell and Böhm in 1998 as an alternative, using a new dataset
of air temperature measurements from along the flowline of Haut Glacier d’Arolla,
Switzerland. The unmodified model performs little better than assuming a constant
linear lapse rate. When modified to allow the ratio of the boundary layer height
to the bulk heat transfer coefficient to vary along the flowline, the model matches
measured air temperatures better, and a further reduction of the root-mean-square
error is obtained, although there is still considerable scope for improvement.
The modified model is shown to perform best under conditions favourable to the
development of katabatic winds – few clouds, positive ambient air temperature,
limited influence of synoptic or valley winds and a long fetch – but its performance
is poor under cloudy conditions.
article_processing_charge: No
article_type: original
author:
- first_name: Lene
full_name: Petersen, Lene
last_name: Petersen
- first_name: Francesca
full_name: Pellicciotti, Francesca
id: b28f055a-81ea-11ed-b70c-a9fe7f7b0e70
last_name: Pellicciotti
- first_name: Inge
full_name: Juszak, Inge
last_name: Juszak
- first_name: Marco
full_name: Carenzo, Marco
last_name: Carenzo
- first_name: Ben
full_name: Brock, Ben
last_name: Brock
citation:
ama: 'Petersen L, Pellicciotti F, Juszak I, Carenzo M, Brock B. Suitability of a
constant air temperature lapse rate over an Alpine glacier: Testing the Greuell
and Böhm model as an alternative. Annals of Glaciology. 2013;54(63):120-130.
doi:10.3189/2013aog63a477'
apa: 'Petersen, L., Pellicciotti, F., Juszak, I., Carenzo, M., & Brock, B. (2013).
Suitability of a constant air temperature lapse rate over an Alpine glacier: Testing
the Greuell and Böhm model as an alternative. Annals of Glaciology. International
Glaciological Society. https://doi.org/10.3189/2013aog63a477'
chicago: 'Petersen, Lene, Francesca Pellicciotti, Inge Juszak, Marco Carenzo, and
Ben Brock. “Suitability of a Constant Air Temperature Lapse Rate over an Alpine
Glacier: Testing the Greuell and Böhm Model as an Alternative.” Annals of Glaciology.
International Glaciological Society, 2013. https://doi.org/10.3189/2013aog63a477.'
ieee: 'L. Petersen, F. Pellicciotti, I. Juszak, M. Carenzo, and B. Brock, “Suitability
of a constant air temperature lapse rate over an Alpine glacier: Testing the Greuell
and Böhm model as an alternative,” Annals of Glaciology, vol. 54, no. 63.
International Glaciological Society, pp. 120–130, 2013.'
ista: 'Petersen L, Pellicciotti F, Juszak I, Carenzo M, Brock B. 2013. Suitability
of a constant air temperature lapse rate over an Alpine glacier: Testing the Greuell
and Böhm model as an alternative. Annals of Glaciology. 54(63), 120–130.'
mla: 'Petersen, Lene, et al. “Suitability of a Constant Air Temperature Lapse Rate
over an Alpine Glacier: Testing the Greuell and Böhm Model as an Alternative.”
Annals of Glaciology, vol. 54, no. 63, International Glaciological Society,
2013, pp. 120–30, doi:10.3189/2013aog63a477.'
short: L. Petersen, F. Pellicciotti, I. Juszak, M. Carenzo, B. Brock, Annals of
Glaciology 54 (2013) 120–130.
date_created: 2023-02-20T08:17:29Z
date_published: 2013-08-01T00:00:00Z
date_updated: 2023-02-21T10:18:24Z
day: '01'
doi: 10.3189/2013aog63a477
extern: '1'
intvolume: ' 54'
issue: '63'
keyword:
- Earth-Surface Processes
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.3189/2013aog63a477
month: '08'
oa: 1
oa_version: Published Version
page: 120-130
publication: Annals of Glaciology
publication_identifier:
eissn:
- 1727-5644
issn:
- 0260-3055
publication_status: published
publisher: International Glaciological Society
quality_controlled: '1'
scopus_import: '1'
status: public
title: 'Suitability of a constant air temperature lapse rate over an Alpine glacier:
Testing the Greuell and Böhm model as an alternative'
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 54
year: '2013'
...
---
_id: '12643'
abstract:
- lang: eng
text: Parameterizations of incoming longwave radiation are increasingly receiving
attention for both low and high elevation glacierized sites. In this paper, we
test 13 clear-sky parameterizations combined with seven cloud corrections for
all-sky atmospheric emissivity at one location on Haut Glacier d'Arolla. We also
analyze the four seasons separately and conduct a cross-validation to test the
parameters’ robustness. The best parameterization is the one by Dilley and O'Brien,
B for clear-sky conditions combined with Unsworth and Monteith cloud correction.
This model is also the most robust when tested in cross-validation. When validated
at different sites in the southern Alps of Switzerland and north-western Italian
Alps, all parameterizations show a substantial decrease in performance, except
for one site, thus suggesting that it is important to recalibrate parameterizations
of incoming longwave radiation for different locations. We argue that this is
due to differences in the structure of the atmosphere at the sites. We also quantify
the effect that the incoming longwave radiation parameterizations have on energy-balance
melt modeling, and show that recalibration of model parameters is needed. Using
parameters from other sites leads to a significant underestimation of melt and
to an error that is larger than that associated with using different parameterizations.
Once recalibrated, however, the parameters of most models seem to be stable over
seasons and years at the location on Haut Glacier d'Arolla.
article_processing_charge: No
article_type: original
author:
- first_name: I.
full_name: Juszak, I.
last_name: Juszak
- first_name: Francesca
full_name: Pellicciotti, Francesca
id: b28f055a-81ea-11ed-b70c-a9fe7f7b0e70
last_name: Pellicciotti
citation:
ama: 'Juszak I, Pellicciotti F. A comparison of parameterizations of incoming longwave
radiation over melting glaciers: Model robustness and seasonal variability. Journal
of Geophysical Research: Atmospheres. 2013;118(8):3066-3084. doi:10.1002/jgrd.50277'
apa: 'Juszak, I., & Pellicciotti, F. (2013). A comparison of parameterizations
of incoming longwave radiation over melting glaciers: Model robustness and seasonal
variability. Journal of Geophysical Research: Atmospheres. American Geophysical
Union. https://doi.org/10.1002/jgrd.50277'
chicago: 'Juszak, I., and Francesca Pellicciotti. “A Comparison of Parameterizations
of Incoming Longwave Radiation over Melting Glaciers: Model Robustness and Seasonal
Variability.” Journal of Geophysical Research: Atmospheres. American Geophysical
Union, 2013. https://doi.org/10.1002/jgrd.50277.'
ieee: 'I. Juszak and F. Pellicciotti, “A comparison of parameterizations of incoming
longwave radiation over melting glaciers: Model robustness and seasonal variability,”
Journal of Geophysical Research: Atmospheres, vol. 118, no. 8. American
Geophysical Union, pp. 3066–3084, 2013.'
ista: 'Juszak I, Pellicciotti F. 2013. A comparison of parameterizations of incoming
longwave radiation over melting glaciers: Model robustness and seasonal variability.
Journal of Geophysical Research: Atmospheres. 118(8), 3066–3084.'
mla: 'Juszak, I., and Francesca Pellicciotti. “A Comparison of Parameterizations
of Incoming Longwave Radiation over Melting Glaciers: Model Robustness and Seasonal
Variability.” Journal of Geophysical Research: Atmospheres, vol. 118, no.
8, American Geophysical Union, 2013, pp. 3066–84, doi:10.1002/jgrd.50277.'
short: 'I. Juszak, F. Pellicciotti, Journal of Geophysical Research: Atmospheres
118 (2013) 3066–3084.'
date_created: 2023-02-20T08:17:34Z
date_published: 2013-04-27T00:00:00Z
date_updated: 2023-02-21T10:10:46Z
day: '27'
doi: 10.1002/jgrd.50277
extern: '1'
intvolume: ' 118'
issue: '8'
keyword:
- Space and Planetary Science
- Earth and Planetary Sciences (miscellaneous)
- Atmospheric Science
- Geophysics
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1002/jgrd.50277
month: '04'
oa: 1
oa_version: Published Version
page: 3066-3084
publication: 'Journal of Geophysical Research: Atmospheres'
publication_identifier:
issn:
- 2169-897X
publication_status: published
publisher: American Geophysical Union
quality_controlled: '1'
scopus_import: '1'
status: public
title: 'A comparison of parameterizations of incoming longwave radiation over melting
glaciers: Model robustness and seasonal variability'
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 118
year: '2013'
...
---
_id: '1304'
abstract:
- lang: eng
text: When confronted with a large-field stimulus rotating around the vertical body
axis, flies display a following behavior called "optomotor response."
As neural control elements, the large tangential horizontal system (HS) cells
of the lobula plate have been prime candidates for long. Here, we applied optogenetic
stimulation of HS cells to evaluate their behavioral role in Drosophila. To minimize
interference of the optical activation of channelrhodopsin-2 with the visual perception
of the flies, we used a bistable variant called ChR2-C128S. By applying pulses
of blue and yellow light, we first demonstrate electrophysiologically that lobula
plate tangential cells can be activated and deactivated repeatedly with no evident
change in depolarization strength over trials. We next show that selective optogenetic
activation of HS cells elicits robust yaw head movements and yaw turning responses
in fixed and tethered flying flies, respectively.
acknowledgement: 'This work was supported by the Max Planck Society. '
author:
- first_name: Väinö
full_name: Haikala, Väinö
last_name: Haikala
- first_name: Maximilian A
full_name: Maximilian Jösch
id: 2BD278E6-F248-11E8-B48F-1D18A9856A87
last_name: Jösch
orcid: 0000-0002-3937-1330
- first_name: Alexander
full_name: Borst, Alexander
last_name: Borst
- first_name: Alex
full_name: Mauss, Alex S
last_name: Mauss
citation:
ama: Haikala V, Jösch MA, Borst A, Mauss A. Optogenetic control of fly optomotor
responses. Journal of Neuroscience. 2013;33(34):13927-13934. doi:10.1523/JNEUROSCI.0340-13.2013
apa: Haikala, V., Jösch, M. A., Borst, A., & Mauss, A. (2013). Optogenetic control
of fly optomotor responses. Journal of Neuroscience. Society for Neuroscience.
https://doi.org/10.1523/JNEUROSCI.0340-13.2013
chicago: Haikala, Väinö, Maximilian A Jösch, Alexander Borst, and Alex Mauss. “Optogenetic
Control of Fly Optomotor Responses.” Journal of Neuroscience. Society for
Neuroscience, 2013. https://doi.org/10.1523/JNEUROSCI.0340-13.2013.
ieee: V. Haikala, M. A. Jösch, A. Borst, and A. Mauss, “Optogenetic control of fly
optomotor responses,” Journal of Neuroscience, vol. 33, no. 34. Society
for Neuroscience, pp. 13927–13934, 2013.
ista: Haikala V, Jösch MA, Borst A, Mauss A. 2013. Optogenetic control of fly optomotor
responses. Journal of Neuroscience. 33(34), 13927–13934.
mla: Haikala, Väinö, et al. “Optogenetic Control of Fly Optomotor Responses.” Journal
of Neuroscience, vol. 33, no. 34, Society for Neuroscience, 2013, pp. 13927–34,
doi:10.1523/JNEUROSCI.0340-13.2013.
short: V. Haikala, M.A. Jösch, A. Borst, A. Mauss, Journal of Neuroscience 33 (2013)
13927–13934.
date_created: 2018-12-11T11:51:16Z
date_published: 2013-01-01T00:00:00Z
date_updated: 2021-01-12T06:49:45Z
day: '01'
doi: 10.1523/JNEUROSCI.0340-13.2013
extern: 1
intvolume: ' 33'
issue: '34'
month: '01'
page: 13927 - 13934
publication: Journal of Neuroscience
publication_status: published
publisher: Society for Neuroscience
publist_id: '5967'
quality_controlled: 0
status: public
title: Optogenetic control of fly optomotor responses
type: journal_article
volume: 33
year: '2013'
...
---
_id: '1305'
abstract:
- lang: eng
text: In the fly Drosophila melanogaster, photoreceptor input to motion vision is
split into two parallel pathways as represented by first-order interneurons L1
and L2 (Rister et al., 2007; Joesch et al., 2010). However, how these pathways
are functionally specialized remains controversial. One study (Eichner et al.,
2011) proposed that the L1-pathway evaluates only sequences of brightness increments
(ON-ON), while the L2-pathway processes exclusively brightness decrements (OFF-OFF).
Another study (Clark et al., 2011) proposed that each of the two pathways evaluates
both ON-ON and OFF-OFF sequences. To decide between these alternatives, we recorded
from motionsensitive neurons in flies in which the output from either L1 or L2
was genetically blocked. We found that blocking L1 abolishes ON-ON responses but
leaves OFF-OFF responses intact. The opposite was true, when the output from L2
was blocked. We conclude that the L1 and L2 pathways are functionally specialized
to detect ON-ON and OFF-OFF sequences, respectively.
acknowledgement: This work was supported by the Max-Planck-Society and the SFB 870
of the Deutsche Forschungsgemeinschaft.
author:
- first_name: Maximilian A
full_name: Maximilian Jösch
id: 2BD278E6-F248-11E8-B48F-1D18A9856A87
last_name: Jösch
orcid: 0000-0002-3937-1330
- first_name: Franz
full_name: Weber, Franz
last_name: Weber
- first_name: Hubert
full_name: Eichner, Hubert
last_name: Eichner
- first_name: Alexander
full_name: Borst, Alexander
last_name: Borst
citation:
ama: Jösch MA, Weber F, Eichner H, Borst A. Functional specialization of parallel
motion detection circuits in the fly. Journal of Neuroscience. 2013;33(3):902-905.
doi:10.1523/JNEUROSCI.3374-12.2013
apa: Jösch, M. A., Weber, F., Eichner, H., & Borst, A. (2013). Functional specialization
of parallel motion detection circuits in the fly. Journal of Neuroscience.
Society for Neuroscience. https://doi.org/10.1523/JNEUROSCI.3374-12.2013
chicago: Jösch, Maximilian A, Franz Weber, Hubert Eichner, and Alexander Borst.
“Functional Specialization of Parallel Motion Detection Circuits in the Fly.”
Journal of Neuroscience. Society for Neuroscience, 2013. https://doi.org/10.1523/JNEUROSCI.3374-12.2013.
ieee: M. A. Jösch, F. Weber, H. Eichner, and A. Borst, “Functional specialization
of parallel motion detection circuits in the fly,” Journal of Neuroscience,
vol. 33, no. 3. Society for Neuroscience, pp. 902–905, 2013.
ista: Jösch MA, Weber F, Eichner H, Borst A. 2013. Functional specialization of
parallel motion detection circuits in the fly. Journal of Neuroscience. 33(3),
902–905.
mla: Jösch, Maximilian A., et al. “Functional Specialization of Parallel Motion
Detection Circuits in the Fly.” Journal of Neuroscience, vol. 33, no. 3,
Society for Neuroscience, 2013, pp. 902–05, doi:10.1523/JNEUROSCI.3374-12.2013.
short: M.A. Jösch, F. Weber, H. Eichner, A. Borst, Journal of Neuroscience 33 (2013)
902–905.
date_created: 2018-12-11T11:51:16Z
date_published: 2013-01-16T00:00:00Z
date_updated: 2021-01-12T06:49:45Z
day: '16'
doi: 10.1523/JNEUROSCI.3374-12.2013
extern: 1
intvolume: ' 33'
issue: '3'
month: '01'
page: 902 - 905
publication: Journal of Neuroscience
publication_status: published
publisher: Society for Neuroscience
publist_id: '5968'
quality_controlled: 0
status: public
title: Functional specialization of parallel motion detection circuits in the fly
type: journal_article
volume: 33
year: '2013'
...
---
_id: '1307'
abstract:
- lang: eng
text: We prove uniqueness of solutions of the DLSS equation in a class of sufficiently
regular functions. The global weak solutions of the DLSS equation constructed
by Jüngel and Matthes belong to this class of uniqueness. We also show uniqueness
of solutions for the quantum drift-diffusion equation, which contains additional
drift and second-order diffusion terms. The results hold in case of periodic or
Dirichlet-Neumann boundary conditions. Our proof is based on a monotonicity property
of the DLSS operator and sophisticated approximation arguments; we derive a PDE
satisfied by the pointwise square root of the solution, which enables us to exploit
the monotonicity property of the operator.
author:
- first_name: Julian L
full_name: Julian Fischer
id: 2C12A0B0-F248-11E8-B48F-1D18A9856A87
last_name: Fischer
orcid: 0000-0002-0479-558X
citation:
ama: Fischer JL. Uniqueness of solutions of the Derrida-Lebowitz-Speer-Spohn equation
and quantum drift diffusion models. Communications in Partial Differential
Equations. 2013;38(11):2004-2047. doi:10.1080/03605302.2013.823548
apa: Fischer, J. L. (2013). Uniqueness of solutions of the Derrida-Lebowitz-Speer-Spohn
equation and quantum drift diffusion models. Communications in Partial Differential
Equations. Taylor & Francis. https://doi.org/10.1080/03605302.2013.823548
chicago: Fischer, Julian L. “Uniqueness of Solutions of the Derrida-Lebowitz-Speer-Spohn
Equation and Quantum Drift Diffusion Models.” Communications in Partial Differential
Equations. Taylor & Francis, 2013. https://doi.org/10.1080/03605302.2013.823548.
ieee: J. L. Fischer, “Uniqueness of solutions of the Derrida-Lebowitz-Speer-Spohn
equation and quantum drift diffusion models,” Communications in Partial Differential
Equations, vol. 38, no. 11. Taylor & Francis, pp. 2004–2047, 2013.
ista: Fischer JL. 2013. Uniqueness of solutions of the Derrida-Lebowitz-Speer-Spohn
equation and quantum drift diffusion models. Communications in Partial Differential
Equations. 38(11), 2004–2047.
mla: Fischer, Julian L. “Uniqueness of Solutions of the Derrida-Lebowitz-Speer-Spohn
Equation and Quantum Drift Diffusion Models.” Communications in Partial Differential
Equations, vol. 38, no. 11, Taylor & Francis, 2013, pp. 2004–47, doi:10.1080/03605302.2013.823548.
short: J.L. Fischer, Communications in Partial Differential Equations 38 (2013)
2004–2047.
date_created: 2018-12-11T11:51:17Z
date_published: 2013-11-01T00:00:00Z
date_updated: 2021-01-12T06:49:46Z
day: '01'
doi: 10.1080/03605302.2013.823548
extern: 1
intvolume: ' 38'
issue: '11'
month: '11'
page: 2004 - 2047
publication: Communications in Partial Differential Equations
publication_status: published
publisher: Taylor & Francis
publist_id: '5962'
quality_controlled: 0
status: public
title: Uniqueness of solutions of the Derrida-Lebowitz-Speer-Spohn equation and quantum
drift diffusion models
type: journal_article
volume: 38
year: '2013'
...
---
_id: '1308'
abstract:
- lang: eng
text: We derive sufficient conditions for advection-driven backward motion of the
free boundary in a chemotaxis model with degenerate mobility. In this model, a
porous-medium-type diffusive term and an advection term are in competition. The
former induces forward motion, the latter may induce backward motion of the free
boundary depending on the direction of advection. We deduce conditions on the
growth of the initial data at the free boundary which ensure that at least initially
the advection term is dominant. This implies local backward motion of the free
boundary provided the advection is (locally) directed appropriately. Our result
is based on a new class of moving test functions and Stampacchia's lemma. As a
by-product of our estimates, we obtain quantitative bounds on the spreading of
the support of solutions for the chemotaxis model and provide a proof for the
finite speed of the support propagation property of solutions.
author:
- first_name: Julian L
full_name: Julian Fischer
id: 2C12A0B0-F248-11E8-B48F-1D18A9856A87
last_name: Fischer
orcid: 0000-0002-0479-558X
citation:
ama: Fischer JL. Advection-driven support shrinking in a chemotaxis model with degenerate
mobility. SIAM Journal on Mathematical Analysis. 2013;45(3):1585-1615.
doi:10.1137/120874291
apa: Fischer, J. L. (2013). Advection-driven support shrinking in a chemotaxis model
with degenerate mobility. SIAM Journal on Mathematical Analysis. Society
for Industrial and Applied Mathematics . https://doi.org/10.1137/120874291
chicago: Fischer, Julian L. “Advection-Driven Support Shrinking in a Chemotaxis
Model with Degenerate Mobility.” SIAM Journal on Mathematical Analysis.
Society for Industrial and Applied Mathematics , 2013. https://doi.org/10.1137/120874291.
ieee: J. L. Fischer, “Advection-driven support shrinking in a chemotaxis model with
degenerate mobility,” SIAM Journal on Mathematical Analysis, vol. 45, no.
3. Society for Industrial and Applied Mathematics , pp. 1585–1615, 2013.
ista: Fischer JL. 2013. Advection-driven support shrinking in a chemotaxis model
with degenerate mobility. SIAM Journal on Mathematical Analysis. 45(3), 1585–1615.
mla: Fischer, Julian L. “Advection-Driven Support Shrinking in a Chemotaxis Model
with Degenerate Mobility.” SIAM Journal on Mathematical Analysis, vol.
45, no. 3, Society for Industrial and Applied Mathematics , 2013, pp. 1585–615,
doi:10.1137/120874291.
short: J.L. Fischer, SIAM Journal on Mathematical Analysis 45 (2013) 1585–1615.
date_created: 2018-12-11T11:51:17Z
date_published: 2013-01-01T00:00:00Z
date_updated: 2021-01-12T06:49:46Z
day: '01'
doi: 10.1137/120874291
extern: 1
intvolume: ' 45'
issue: '3'
month: '01'
page: 1585 - 1615
publication: SIAM Journal on Mathematical Analysis
publication_status: published
publisher: 'Society for Industrial and Applied Mathematics '
publist_id: '5963'
quality_controlled: 0
status: public
title: Advection-driven support shrinking in a chemotaxis model with degenerate mobility
type: journal_article
volume: 45
year: '2013'
...
---
_id: '1310'
abstract:
- lang: eng
text: We derive lower bounds on asymptotic support propagation rates for strong
solutions of the Cauchy problem for the thin-film equation. The bounds coincide
up to a constant factor with the previously known upper bounds and thus are sharp.
Our results hold in case of at most three spatial dimensions and n∈. (1, 2.92).
The result is established using weighted backward entropy inequalities with singular
weight functions to yield a differential inequality; combined with some entropy
production estimates, the optimal rate of propagation is obtained. To the best
of our knowledge, these are the first lower bounds on asymptotic support propagation
rates for higher-order nonnegativity-preserving parabolic equations.
author:
- first_name: Julian L
full_name: Julian Fischer
id: 2C12A0B0-F248-11E8-B48F-1D18A9856A87
last_name: Fischer
orcid: 0000-0002-0479-558X
citation:
ama: Fischer JL. Optimal lower bounds on asymptotic support propagation rates for
the thin-film equation. Journal of Differential Equations. 2013;255(10):3127-3149.
doi:10.1016/j.jde.2013.07.028
apa: Fischer, J. L. (2013). Optimal lower bounds on asymptotic support propagation
rates for the thin-film equation. Journal of Differential Equations. Academic
Press. https://doi.org/10.1016/j.jde.2013.07.028
chicago: Fischer, Julian L. “Optimal Lower Bounds on Asymptotic Support Propagation
Rates for the Thin-Film Equation.” Journal of Differential Equations. Academic
Press, 2013. https://doi.org/10.1016/j.jde.2013.07.028.
ieee: J. L. Fischer, “Optimal lower bounds on asymptotic support propagation rates
for the thin-film equation,” Journal of Differential Equations, vol. 255,
no. 10. Academic Press, pp. 3127–3149, 2013.
ista: Fischer JL. 2013. Optimal lower bounds on asymptotic support propagation rates
for the thin-film equation. Journal of Differential Equations. 255(10), 3127–3149.
mla: Fischer, Julian L. “Optimal Lower Bounds on Asymptotic Support Propagation
Rates for the Thin-Film Equation.” Journal of Differential Equations, vol.
255, no. 10, Academic Press, 2013, pp. 3127–49, doi:10.1016/j.jde.2013.07.028.
short: J.L. Fischer, Journal of Differential Equations 255 (2013) 3127–3149.
date_created: 2018-12-11T11:51:18Z
date_published: 2013-11-15T00:00:00Z
date_updated: 2021-01-12T06:49:47Z
day: '15'
doi: 10.1016/j.jde.2013.07.028
extern: 1
intvolume: ' 255'
issue: '10'
month: '11'
page: 3127 - 3149
publication: Journal of Differential Equations
publication_status: published
publisher: Academic Press
publist_id: '5961'
quality_controlled: 0
status: public
title: Optimal lower bounds on asymptotic support propagation rates for the thin-film
equation
type: journal_article
volume: 255
year: '2013'
...
---
_id: '2107'
abstract:
- lang: eng
text: We present a method for fabrication-oriented design of actuated deformable
characters that allows a user to automatically create physical replicas of digitally
designed characters using rapid manufacturing technologies. Given a deformable
character and a set of target poses as input, our method computes a small set
of actuators along with their locations on the surface and optimizes the internal
material distribution such that the resulting character exhibits the desired deformation
behavior. We approach this problem with a dedicated algorithm that combines finite-element
analysis, sparse regularization, and constrained optimization. We validate our
pipeline on a set of two- and three-dimensional example characters and present
results in simulation and physically-fabricated prototypes.
acknowledgement: This work was partly funded by the NCCR Co-Me of the Swiss NSF
article_number: '82'
article_processing_charge: No
author:
- first_name: Mélina
full_name: Skouras, Mélina
last_name: Skouras
- first_name: Bernhard
full_name: Thomaszewski, Bernhard
last_name: Thomaszewski
- first_name: Stelian
full_name: Coros, Stelian
last_name: Coros
- first_name: Bernd
full_name: Bickel, Bernd
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
- first_name: Markus
full_name: Groß, Markus
last_name: Groß
citation:
ama: Skouras M, Thomaszewski B, Coros S, Bickel B, Groß M. Computational design
of actuated deformable characters. ACM Transactions on Graphics. 2013;32(4).
doi:10.1145/2461912.2461979
apa: Skouras, M., Thomaszewski, B., Coros, S., Bickel, B., & Groß, M. (2013).
Computational design of actuated deformable characters. ACM Transactions on
Graphics. ACM. https://doi.org/10.1145/2461912.2461979
chicago: Skouras, Mélina, Bernhard Thomaszewski, Stelian Coros, Bernd Bickel, and
Markus Groß. “Computational Design of Actuated Deformable Characters.” ACM
Transactions on Graphics. ACM, 2013. https://doi.org/10.1145/2461912.2461979.
ieee: M. Skouras, B. Thomaszewski, S. Coros, B. Bickel, and M. Groß, “Computational
design of actuated deformable characters,” ACM Transactions on Graphics,
vol. 32, no. 4. ACM, 2013.
ista: Skouras M, Thomaszewski B, Coros S, Bickel B, Groß M. 2013. Computational
design of actuated deformable characters. ACM Transactions on Graphics. 32(4),
82.
mla: Skouras, Mélina, et al. “Computational Design of Actuated Deformable Characters.”
ACM Transactions on Graphics, vol. 32, no. 4, 82, ACM, 2013, doi:10.1145/2461912.2461979.
short: M. Skouras, B. Thomaszewski, S. Coros, B. Bickel, M. Groß, ACM Transactions
on Graphics 32 (2013).
date_created: 2018-12-11T11:55:45Z
date_published: 2013-07-01T00:00:00Z
date_updated: 2025-10-01T08:08:25Z
day: '01'
doi: 10.1145/2461912.2461979
extern: '1'
intvolume: ' 32'
issue: '4'
language:
- iso: eng
month: '07'
oa_version: None
publication: ACM Transactions on Graphics
publication_status: published
publisher: ACM
publist_id: '4926'
status: public
title: Computational design of actuated deformable characters
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 32
year: '2013'
...
---
_id: '2108'
abstract:
- lang: eng
text: 'We present an interactive design system that allows non-expert users to create
animated mechanical characters. Given an articulated character as input, the user
iteratively creates an animation by sketching motion curves indicating how different
parts of the character should move. For each motion curve, our framework creates
an optimized mechanism that reproduces it as closely as possible. The resulting
mechanisms are attached to the character and then connected to each other using
gear trains, which are created in a semi-automated fashion. The mechanical assemblies
generated with our system can be driven with a single input driver, such as a
hand-operated crank or an electric motor, and they can be fabricated using rapid
prototyping devices. We demonstrate the versatility of our approach by designing
a wide range of mechanical characters, several of which we manufactured using
3D printing. While our pipeline is designed for characters driven by planar mechanisms,
significant parts of it extend directly to non-planar mechanisms, allowing us
to create characters with compelling 3D motions. '
author:
- first_name: Stelian
full_name: Coros, Stelian
last_name: Coros
- first_name: Bernhard
full_name: Thomaszewski, Bernhard
last_name: Thomaszewski
- first_name: Gioacchino
full_name: Noris, Gioacchino
last_name: Noris
- first_name: Shinjiro
full_name: Sueda, Shinjiro
last_name: Sueda
- first_name: Moira
full_name: Forberg, Moira
last_name: Forberg
- first_name: Robert
full_name: Sumner, Robert W
last_name: Sumner
- first_name: Wojciech
full_name: Matusik, Wojciech
last_name: Matusik
- first_name: Bernd
full_name: Bernd Bickel
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
citation:
ama: Coros S, Thomaszewski B, Noris G, et al. Computational design of mechanical
characters. ACM Transactions on Graphics. 2013;32(4). doi:10.1145/2461912.2461953
apa: Coros, S., Thomaszewski, B., Noris, G., Sueda, S., Forberg, M., Sumner, R.,
… Bickel, B. (2013). Computational design of mechanical characters. ACM Transactions
on Graphics. ACM. https://doi.org/10.1145/2461912.2461953
chicago: Coros, Stelian, Bernhard Thomaszewski, Gioacchino Noris, Shinjiro Sueda,
Moira Forberg, Robert Sumner, Wojciech Matusik, and Bernd Bickel. “Computational
Design of Mechanical Characters.” ACM Transactions on Graphics. ACM, 2013.
https://doi.org/10.1145/2461912.2461953.
ieee: S. Coros et al., “Computational design of mechanical characters,” ACM
Transactions on Graphics, vol. 32, no. 4. ACM, 2013.
ista: Coros S, Thomaszewski B, Noris G, Sueda S, Forberg M, Sumner R, Matusik W,
Bickel B. 2013. Computational design of mechanical characters. ACM Transactions
on Graphics. 32(4).
mla: Coros, Stelian, et al. “Computational Design of Mechanical Characters.” ACM
Transactions on Graphics, vol. 32, no. 4, ACM, 2013, doi:10.1145/2461912.2461953.
short: S. Coros, B. Thomaszewski, G. Noris, S. Sueda, M. Forberg, R. Sumner, W.
Matusik, B. Bickel, ACM Transactions on Graphics 32 (2013).
date_created: 2018-12-11T11:55:46Z
date_published: 2013-07-01T00:00:00Z
date_updated: 2021-01-12T06:55:21Z
day: '01'
doi: 10.1145/2461912.2461953
extern: 1
intvolume: ' 32'
issue: '4'
month: '07'
publication: ACM Transactions on Graphics
publication_status: published
publisher: ACM
publist_id: '4927'
quality_controlled: 0
status: public
title: Computational design of mechanical characters
type: journal_article
volume: 32
year: '2013'
...
---
_id: '2109'
abstract:
- lang: eng
text: Most additive manufacturing technologies work by layering, i.e. slicing the
shape and then generating each slice independently. This introduces an anisotropy
into the process, often as different accuracies in the tangential and normal directions,
but also in terms of other parameters such as build speed or tensile strength
and strain. We model this as an anisotropic cubic element. Our approach then finds
a compromise between modeling each part of the shape individually in the best
possible direction and using one direction for the whole shape part. In particular,
we compute an orthogonal basis and consider only the three basis vectors as slice
normals (i.e. fabrication directions). Then we optimize a decomposition of the
shape along this basis so that each part can be consistently sliced along one
of the basis vectors. In simulation, we show that this approach is superior to
slicing the whole shape in one direction, only. It also has clear benefits if
the shape is larger than the build volume of the available equipment.
author:
- first_name: Kristian
full_name: Hildebrand, Kristian
last_name: Hildebrand
- first_name: Bernd
full_name: Bernd Bickel
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
- first_name: Marc
full_name: Alexa, Marc
last_name: Alexa
citation:
ama: Hildebrand K, Bickel B, Alexa M. Orthogonal slicing for additive manufacturing.
Computers and Graphics (Pergamon). 2013;37(6):669-675. doi:10.1016/j.cag.2013.05.011
apa: Hildebrand, K., Bickel, B., & Alexa, M. (2013). Orthogonal slicing for
additive manufacturing. Computers and Graphics (Pergamon). Elsevier. https://doi.org/10.1016/j.cag.2013.05.011
chicago: Hildebrand, Kristian, Bernd Bickel, and Marc Alexa. “Orthogonal Slicing
for Additive Manufacturing.” Computers and Graphics (Pergamon). Elsevier,
2013. https://doi.org/10.1016/j.cag.2013.05.011.
ieee: K. Hildebrand, B. Bickel, and M. Alexa, “Orthogonal slicing for additive manufacturing,”
Computers and Graphics (Pergamon), vol. 37, no. 6. Elsevier, pp. 669–675,
2013.
ista: Hildebrand K, Bickel B, Alexa M. 2013. Orthogonal slicing for additive manufacturing.
Computers and Graphics (Pergamon). 37(6), 669–675.
mla: Hildebrand, Kristian, et al. “Orthogonal Slicing for Additive Manufacturing.”
Computers and Graphics (Pergamon), vol. 37, no. 6, Elsevier, 2013, pp.
669–75, doi:10.1016/j.cag.2013.05.011.
short: K. Hildebrand, B. Bickel, M. Alexa, Computers and Graphics (Pergamon) 37
(2013) 669–675.
date_created: 2018-12-11T11:55:46Z
date_published: 2013-10-01T00:00:00Z
date_updated: 2021-01-12T06:55:22Z
day: '01'
doi: 10.1016/j.cag.2013.05.011
extern: 1
intvolume: ' 37'
issue: '6'
month: '10'
page: 669 - 675
publication: Computers and Graphics (Pergamon)
publication_status: published
publisher: Elsevier
publist_id: '4924'
quality_controlled: 0
status: public
title: Orthogonal slicing for additive manufacturing
type: journal_article
volume: 37
year: '2013'
...
---
_id: '2110'
abstract:
- lang: eng
text: 'We present a method for practical physical reproduction and design of homogeneous
materials with desired subsurface scattering. Our process uses a collection of
different pigments that can be suspended in a clear base material. Our goal is
to determine pigment concentrations that best reproduce the appearance and subsurface
scattering of a given target material. In order to achieve this task we first
fabricate a collection of material samples composed of known mixtures of the available
pigments with the base material. We then acquire their reflectance profiles using
a custom-built measurement device. We use the same device to measure the reflectance
profile of a target material. Based on the database of mappings from pigment concentrations
to reflectance profiles, we use an optimization process to compute the concentration
of pigments to best replicate the target material appearance. We demonstrate the
practicality of our method by reproducing a variety of different translucent materials.
We also present a tool that allows the user to explore the range of achievable
appearances for a given set of pigments. '
author:
- first_name: Marios
full_name: Papas, Marios
last_name: Papas
- first_name: Christian
full_name: Regg, Christian
last_name: Regg
- first_name: Wojciech
full_name: Jarosz, Wojciech
last_name: Jarosz
- first_name: Bernd
full_name: Bernd Bickel
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
- first_name: Philip
full_name: Jackson, Philip V
last_name: Jackson
- first_name: Wojciech
full_name: Matusik, Wojciech
last_name: Matusik
- first_name: Steve
full_name: Marschner, Steve
last_name: Marschner
- first_name: Markus
full_name: Groß, Markus S
last_name: Groß
citation:
ama: Papas M, Regg C, Jarosz W, et al. Fabricating translucent materials using continuous
pigment mixtures. ACM Transactions on Graphics. 2013;32(4). doi:10.1145/2461912.2461974
apa: Papas, M., Regg, C., Jarosz, W., Bickel, B., Jackson, P., Matusik, W., … Groß,
M. (2013). Fabricating translucent materials using continuous pigment mixtures.
ACM Transactions on Graphics. ACM. https://doi.org/10.1145/2461912.2461974
chicago: Papas, Marios, Christian Regg, Wojciech Jarosz, Bernd Bickel, Philip Jackson,
Wojciech Matusik, Steve Marschner, and Markus Groß. “Fabricating Translucent Materials
Using Continuous Pigment Mixtures.” ACM Transactions on Graphics. ACM,
2013. https://doi.org/10.1145/2461912.2461974.
ieee: M. Papas et al., “Fabricating translucent materials using continuous
pigment mixtures,” ACM Transactions on Graphics, vol. 32, no. 4. ACM, 2013.
ista: Papas M, Regg C, Jarosz W, Bickel B, Jackson P, Matusik W, Marschner S, Groß
M. 2013. Fabricating translucent materials using continuous pigment mixtures.
ACM Transactions on Graphics. 32(4).
mla: Papas, Marios, et al. “Fabricating Translucent Materials Using Continuous Pigment
Mixtures.” ACM Transactions on Graphics, vol. 32, no. 4, ACM, 2013, doi:10.1145/2461912.2461974.
short: M. Papas, C. Regg, W. Jarosz, B. Bickel, P. Jackson, W. Matusik, S. Marschner,
M. Groß, ACM Transactions on Graphics 32 (2013).
date_created: 2018-12-11T11:55:46Z
date_published: 2013-07-01T00:00:00Z
date_updated: 2021-01-12T06:55:22Z
day: '01'
doi: 10.1145/2461912.2461974
extern: 1
intvolume: ' 32'
issue: '4'
month: '07'
publication: ACM Transactions on Graphics
publication_status: published
publisher: ACM
publist_id: '4925'
quality_controlled: 0
status: public
title: Fabricating translucent materials using continuous pigment mixtures
type: journal_article
volume: 32
year: '2013'
...
---
_id: '2111'
abstract:
- lang: eng
text: Animated animatronic figures are a unique way to give physical presence to
a character. However, their movement and expressions are often limited due to
mechanical constraints. In this paper, we propose a complete process for augmenting
physical avatars using projector-based illumination, significantly increasing
their expressiveness. Given an input animation, the system decomposes the motion
into low-frequency motion that can be physically reproduced by the animatronic
head and high-frequency details that are added using projected shading. At the
core is a spatio-temporal optimization process that compresses the motion in gradient
space, ensuring faithful motion replay while respecting the physical limitations
of the system. We also propose a complete multi-camera and projection system,
including a novel defocused projection and subsurface scattering compensation
scheme. The result of our system is a highly expressive physical avatar that features
facial details and motion otherwise unattainable due to physical constraints.
author:
- first_name: Amit
full_name: Bermano, Amit H
last_name: Bermano
- first_name: Philipp
full_name: Bruschweiler, Philipp
last_name: Bruschweiler
- first_name: Anselm
full_name: Grundhöfer, Anselm
last_name: Grundhöfer
- first_name: Daisuke
full_name: Iwai, Daisuke
last_name: Iwai
- first_name: Bernd
full_name: Bernd Bickel
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
- first_name: Markus
full_name: Groß, Markus S
last_name: Groß
citation:
ama: Bermano A, Bruschweiler P, Grundhöfer A, Iwai D, Bickel B, Groß M. Augmenting
physical avatars using projector-based illumination. ACM Transactions on Graphics.
2013;32(6). doi:10.1145/2508363.2508416
apa: Bermano, A., Bruschweiler, P., Grundhöfer, A., Iwai, D., Bickel, B., &
Groß, M. (2013). Augmenting physical avatars using projector-based illumination.
ACM Transactions on Graphics. ACM. https://doi.org/10.1145/2508363.2508416
chicago: Bermano, Amit, Philipp Bruschweiler, Anselm Grundhöfer, Daisuke Iwai, Bernd
Bickel, and Markus Groß. “Augmenting Physical Avatars Using Projector-Based Illumination.”
ACM Transactions on Graphics. ACM, 2013. https://doi.org/10.1145/2508363.2508416.
ieee: A. Bermano, P. Bruschweiler, A. Grundhöfer, D. Iwai, B. Bickel, and M. Groß,
“Augmenting physical avatars using projector-based illumination,” ACM Transactions
on Graphics, vol. 32, no. 6. ACM, 2013.
ista: Bermano A, Bruschweiler P, Grundhöfer A, Iwai D, Bickel B, Groß M. 2013. Augmenting
physical avatars using projector-based illumination. ACM Transactions on Graphics.
32(6).
mla: Bermano, Amit, et al. “Augmenting Physical Avatars Using Projector-Based Illumination.”
ACM Transactions on Graphics, vol. 32, no. 6, ACM, 2013, doi:10.1145/2508363.2508416.
short: A. Bermano, P. Bruschweiler, A. Grundhöfer, D. Iwai, B. Bickel, M. Groß,
ACM Transactions on Graphics 32 (2013).
date_created: 2018-12-11T11:55:47Z
date_published: 2013-11-01T00:00:00Z
date_updated: 2021-01-12T06:55:23Z
day: '01'
doi: 10.1145/2508363.2508416
extern: 1
intvolume: ' 32'
issue: '6'
month: '11'
publication: ACM Transactions on Graphics
publication_status: published
publisher: ACM
publist_id: '4922'
quality_controlled: 0
status: public
title: Augmenting physical avatars using projector-based illumination
type: journal_article
volume: 32
year: '2013'
...
---
OA_type: closed access
_id: '21110'
abstract:
- lang: eng
text: The NAD(P)H-dependent carbonyl reductase from Candida parapsilosis ATCC 7330
catalyses the asymmetric reduction of ethyl 4-phenyl-2-oxobutanoate to ethyl (R)-4-phenyl-2-hydroxybutanoate,
a precursor of angiotensin-converting enzyme inhibitors such as Cilazapril and
Benazepril. The carbonyl reductase was expressed in Escherichia coli and purified
by GST-affinity and size-exclusion chromatography. Crystals were obtained by the
hanging-drop vapour-diffusion method and diffracted to 1.86 Å resolution. The
asymmetric unit contained two molecules of carbonyl reductase, with a solvent
content of 48%. The structure was solved by molecular replacement using cinnamyl
alcohol dehydrogenase from Saccharomyces cerevisiae as a search model.
article_processing_charge: No
article_type: original
author:
- first_name: Nidhi
full_name: Aggarwal, Nidhi
last_name: Aggarwal
- first_name: Pradeep K
full_name: Mandal, Pradeep K
id: 6a3def15-d4b4-11ef-9fa9-a24c1f545ec3
last_name: Mandal
orcid: 0000-0001-5996-956X
- first_name: Namasivayam
full_name: Gautham, Namasivayam
last_name: Gautham
- first_name: Anju
full_name: Chadha, Anju
last_name: Chadha
citation:
ama: Aggarwal N, Mandal PK, Gautham N, Chadha A. Expression, purification, crystallization
and preliminary X-ray diffraction analysis of carbonyl reductase from Candida
parapsilosis ATCC 7330. Acta Crystallographica Section F Structural Biology
Communications. 2013;69(3):313-315. doi:10.1107/s1744309113003667
apa: Aggarwal, N., Mandal, P. K., Gautham, N., & Chadha, A. (2013). Expression,
purification, crystallization and preliminary X-ray diffraction analysis of carbonyl
reductase from Candida parapsilosis ATCC 7330. Acta Crystallographica Section
F Structural Biology Communications. International Union of Crystallography.
https://doi.org/10.1107/s1744309113003667
chicago: Aggarwal, Nidhi, Pradeep K Mandal, Namasivayam Gautham, and Anju Chadha.
“Expression, Purification, Crystallization and Preliminary X-Ray Diffraction Analysis
of Carbonyl Reductase from Candida Parapsilosis ATCC 7330.” Acta Crystallographica
Section F Structural Biology Communications. International Union of Crystallography,
2013. https://doi.org/10.1107/s1744309113003667.
ieee: N. Aggarwal, P. K. Mandal, N. Gautham, and A. Chadha, “Expression, purification,
crystallization and preliminary X-ray diffraction analysis of carbonyl reductase
from Candida parapsilosis ATCC 7330,” Acta Crystallographica Section F Structural
Biology Communications, vol. 69, no. 3. International Union of Crystallography,
pp. 313–315, 2013.
ista: Aggarwal N, Mandal PK, Gautham N, Chadha A. 2013. Expression, purification,
crystallization and preliminary X-ray diffraction analysis of carbonyl reductase
from Candida parapsilosis ATCC 7330. Acta Crystallographica Section F Structural
Biology Communications. 69(3), 313–315.
mla: Aggarwal, Nidhi, et al. “Expression, Purification, Crystallization and Preliminary
X-Ray Diffraction Analysis of Carbonyl Reductase from Candida Parapsilosis ATCC
7330.” Acta Crystallographica Section F Structural Biology Communications,
vol. 69, no. 3, International Union of Crystallography, 2013, pp. 313–15, doi:10.1107/s1744309113003667.
short: N. Aggarwal, P.K. Mandal, N. Gautham, A. Chadha, Acta Crystallographica Section
F Structural Biology Communications 69 (2013) 313–315.
date_created: 2026-01-29T22:11:18Z
date_published: 2013-03-01T00:00:00Z
date_updated: 2026-02-23T08:56:25Z
day: '01'
doi: 10.1107/s1744309113003667
extern: '1'
has_accepted_license: '1'
intvolume: ' 69'
issue: '3'
language:
- iso: eng
month: '03'
oa_version: None
page: 313-315
publication: Acta Crystallographica Section F Structural Biology Communications
publication_identifier:
issn:
- 1744-3091
publication_status: published
publisher: International Union of Crystallography
quality_controlled: '1'
status: public
title: Expression, purification, crystallization and preliminary X-ray diffraction
analysis of carbonyl reductase from Candida parapsilosis ATCC 7330
type: journal_article
user_id: 2DF688A6-F248-11E8-B48F-1D18A9856A87
volume: 69
year: '2013'
...
---
_id: '2112'
abstract:
- lang: eng
text: Force-deformation measurements of cloth exhibit significant hysteresis, and
many researchers have identified internal friction as the source of this effect.
However, it has not been incorporated into computer animation models of cloth.
In this paper, we propose a model of internal friction based on an augmented reparameterization
of Dahl's model, and we show that this model provides a good match to several
important features of cloth hysteresis even with a minimal set of parameters.
We also propose novel parameter estimation procedures that are based on simple
and inexpensive setups and need only sparse data, as opposed to the complex hardware
and dense data acquisition of previous methods. Finally, we provide an algorithm
for the efficient simulation of internal friction, and we demonstrate it on simulation
examples that show disparate behavior with and without internal friction.
acknowledgement: This work was supported in part by the European Research Council
(ERC-2011-StG-280135 Animetrics) and the Spanish Ministry of Economy (TIN2012-35840).
author:
- first_name: Eder
full_name: Miguel, Eder
last_name: Miguel
- first_name: Rasmus
full_name: Tamstorf, Rasmus
last_name: Tamstorf
- first_name: Derek
full_name: Bradley, Derek J
last_name: Bradley
- first_name: Sara
full_name: Schvartzman, Sara C
last_name: Schvartzman
- first_name: Bernhard
full_name: Thomaszewski, Bernhard
last_name: Thomaszewski
- first_name: Bernd
full_name: Bernd Bickel
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
- first_name: Wojciech
full_name: Matusik, Wojciech
last_name: Matusik
- first_name: Steve
full_name: Marschner, Steve
last_name: Marschner
- first_name: Miguel
full_name: Otaduy, Miguel A
last_name: Otaduy
citation:
ama: Miguel E, Tamstorf R, Bradley D, et al. Modeling and estimation of internal
friction in cloth. ACM Transactions on Graphics. 2013;32(6). doi:10.1145/2508363.2508389
apa: Miguel, E., Tamstorf, R., Bradley, D., Schvartzman, S., Thomaszewski, B., Bickel,
B., … Otaduy, M. (2013). Modeling and estimation of internal friction in cloth.
ACM Transactions on Graphics. ACM. https://doi.org/10.1145/2508363.2508389
chicago: Miguel, Eder, Rasmus Tamstorf, Derek Bradley, Sara Schvartzman, Bernhard
Thomaszewski, Bernd Bickel, Wojciech Matusik, Steve Marschner, and Miguel Otaduy.
“Modeling and Estimation of Internal Friction in Cloth.” ACM Transactions on
Graphics. ACM, 2013. https://doi.org/10.1145/2508363.2508389
.
ieee: E. Miguel et al., “Modeling and estimation of internal friction in
cloth,” ACM Transactions on Graphics, vol. 32, no. 6. ACM, 2013.
ista: Miguel E, Tamstorf R, Bradley D, Schvartzman S, Thomaszewski B, Bickel B,
Matusik W, Marschner S, Otaduy M. 2013. Modeling and estimation of internal friction
in cloth. ACM Transactions on Graphics. 32(6).
mla: Miguel, Eder, et al. “Modeling and Estimation of Internal Friction in Cloth.”
ACM Transactions on Graphics, vol. 32, no. 6, ACM, 2013, doi:10.1145/2508363.2508389 .
short: E. Miguel, R. Tamstorf, D. Bradley, S. Schvartzman, B. Thomaszewski, B. Bickel,
W. Matusik, S. Marschner, M. Otaduy, ACM Transactions on Graphics 32 (2013).
date_created: 2018-12-11T11:55:47Z
date_published: 2013-11-01T00:00:00Z
date_updated: 2021-01-12T06:55:23Z
day: '01'
doi: '10.1145/2508363.2508389 '
extern: 1
intvolume: ' 32'
issue: '6'
month: '11'
publication: ACM Transactions on Graphics
publication_status: published
publisher: ACM
publist_id: '4923'
quality_controlled: 0
status: public
title: Modeling and estimation of internal friction in cloth
type: journal_article
volume: 32
year: '2013'
...
---
_id: '2113'
abstract:
- lang: eng
text: A new method fabricates custom surface reflectance and spatially varying bidirectional
reflectance distribution functions (svBRDFs). Researchers optimize a microgeometry
for a range of normal distribution functions and simulate the resulting surface's
effective reflectance. Using the simulation's results, they reproduce an input
svBRDF's appearance by distributing the microgeometry on the printed material's
surface. This method lets people print svBRDFs on planar samples with current
3D printing technology, even with a limited set of printing materials. It extends
naturally to printing svBRDFs on arbitrary shapes.
author:
- first_name: Olivier
full_name: Rouiller, Olivier
last_name: Rouiller
- first_name: Bernd
full_name: Bernd Bickel
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
- first_name: Jan
full_name: Kautz, Jan
last_name: Kautz
- first_name: Wojciech
full_name: Matusik, Wojciech
last_name: Matusik
- first_name: Marc
full_name: Alexa, Marc
last_name: Alexa
citation:
ama: Rouiller O, Bickel B, Kautz J, Matusik W, Alexa M. 3D printing spatially varying
BRDFs. IEEE Computer Graphics and Applications. 2013;33(6):48-57. doi:10.1109/MCG.2013.82
apa: Rouiller, O., Bickel, B., Kautz, J., Matusik, W., & Alexa, M. (2013). 3D
printing spatially varying BRDFs. IEEE Computer Graphics and Applications.
IEEE. https://doi.org/10.1109/MCG.2013.82
chicago: Rouiller, Olivier, Bernd Bickel, Jan Kautz, Wojciech Matusik, and Marc
Alexa. “3D Printing Spatially Varying BRDFs.” IEEE Computer Graphics and Applications.
IEEE, 2013. https://doi.org/10.1109/MCG.2013.82
.
ieee: O. Rouiller, B. Bickel, J. Kautz, W. Matusik, and M. Alexa, “3D printing spatially
varying BRDFs,” IEEE Computer Graphics and Applications, vol. 33, no. 6.
IEEE, pp. 48–57, 2013.
ista: Rouiller O, Bickel B, Kautz J, Matusik W, Alexa M. 2013. 3D printing spatially
varying BRDFs. IEEE Computer Graphics and Applications. 33(6), 48–57.
mla: Rouiller, Olivier, et al. “3D Printing Spatially Varying BRDFs.” IEEE Computer
Graphics and Applications, vol. 33, no. 6, IEEE, 2013, pp. 48–57, doi:10.1109/MCG.2013.82 .
short: O. Rouiller, B. Bickel, J. Kautz, W. Matusik, M. Alexa, IEEE Computer Graphics
and Applications 33 (2013) 48–57.
date_created: 2018-12-11T11:55:47Z
date_published: 2013-09-23T00:00:00Z
date_updated: 2021-01-12T06:55:23Z
day: '23'
doi: '10.1109/MCG.2013.82 '
extern: 1
intvolume: ' 33'
issue: '6'
month: '09'
page: 48 - 57
publication: IEEE Computer Graphics and Applications
publication_status: published
publisher: IEEE
publist_id: '4920'
quality_controlled: 0
status: public
title: 3D printing spatially varying BRDFs
type: journal_article
volume: 33
year: '2013'
...
---
_id: '2114'
abstract:
- lang: eng
text: 3D printing is considered a disruptive technology with a potentially tremendous
socioeconomic impact. The three articles in this special issue illustrate how
novel computer graphics approaches are advancing such digital fabrication.
author:
- first_name: Bernd
full_name: Bernd Bickel
id: 49876194-F248-11E8-B48F-1D18A9856A87
last_name: Bickel
orcid: 0000-0001-6511-9385
- first_name: Marc
full_name: Alexa, Marc
last_name: Alexa
citation:
ama: 'Bickel B, Alexa M. Computational aspects of fabrication: Modeling, design
and 3d printing. IEEE Computer Graphics and Applications. 2013;33(6):24-25.
doi:10.1109/MCG.2013.89'
apa: 'Bickel, B., & Alexa, M. (2013). Computational aspects of fabrication:
Modeling, design and 3d printing. IEEE Computer Graphics and Applications.
IEEE. https://doi.org/10.1109/MCG.2013.89'
chicago: 'Bickel, Bernd, and Marc Alexa. “Computational Aspects of Fabrication:
Modeling, Design and 3d Printing.” IEEE Computer Graphics and Applications.
IEEE, 2013. https://doi.org/10.1109/MCG.2013.89.'
ieee: 'B. Bickel and M. Alexa, “Computational aspects of fabrication: Modeling,
design and 3d printing,” IEEE Computer Graphics and Applications, vol.
33, no. 6. IEEE, pp. 24–25, 2013.'
ista: 'Bickel B, Alexa M. 2013. Computational aspects of fabrication: Modeling,
design and 3d printing. IEEE Computer Graphics and Applications. 33(6), 24–25.'
mla: 'Bickel, Bernd, and Marc Alexa. “Computational Aspects of Fabrication: Modeling,
Design and 3d Printing.” IEEE Computer Graphics and Applications, vol.
33, no. 6, IEEE, 2013, pp. 24–25, doi:10.1109/MCG.2013.89.'
short: B. Bickel, M. Alexa, IEEE Computer Graphics and Applications 33 (2013) 24–25.
date_created: 2018-12-11T11:55:48Z
date_published: 2013-12-01T00:00:00Z
date_updated: 2021-01-12T06:55:24Z
day: '01'
doi: 10.1109/MCG.2013.89
extern: 1
intvolume: ' 33'
issue: '6'
month: '12'
page: 24 - 25
publication: IEEE Computer Graphics and Applications
publication_status: published
publisher: IEEE
publist_id: '4921'
quality_controlled: 0
status: public
title: 'Computational aspects of fabrication: Modeling, design and 3d printing'
type: journal_article
volume: 33
year: '2013'
...