Z. Liu, M. Piovarci, C. Hafner, R. Charrondiere, and B. Bickel, “Directionality-aware design of embroidery patterns,” Computer Graphics Forum, vol. 42, no. 2. Wiley, pp. 397–409, 2023.

K. Tojo, A. Shamir, B. Bickel, and N. Umetani, “Stealth shaper: Reflectivity optimization as surface stylization,” in SIGGRAPH 2023 Conference Proceedings, Los Angeles, CA, United States, 2023.

P. Rao et al., “A deeper analysis of volumetric relightiable faces,” International Journal of Computer Vision. Springer Nature, 2023.

L. Makatura et al., “Procedural metamaterials: A unified procedural graph for metamaterial design,” ACM Transactions on Graphics, vol. 42, no. 5. Association for Computing Machinery, 2023.

K. Liao, T. Tricard, M. Piovarci, H.-P. Seidel, and V. Babaei, “Learning deposition policies for fused multi-material 3D printing,” in 2023 IEEE International Conference on Robotics and Automation, London, United Kingdom, 2023, vol. 2023, pp. 12345–12352.

F. Zhong, Y. Xu, H. Zhao, and L. Lu, “As-Continuous-As-Possible extrusion-based fabrication of surface models,” ACM Transactions on Graphics, vol. 42, no. 3. Association for Computing Machinery, 2023.

P. Velicky et al., “Dense 4D nanoscale reconstruction of living brain tissue,” Nature Methods, vol. 20. Springer Nature, pp. 1256–1265, 2023.

B. Chen et al., “The effect of display capabilities on the gloss consistency between real and virtual objects,” in Proceedings of the SIGGRAPH Asia 2023 Conference, Sydney, Australia, 2023.

M. Freire, M. Bhargava, C. Schreck, P.-A. Hugron, B. Bickel, and S. Lefebvre, “PCBend: Light up your 3D shapes with foldable circuit boards,” Transactions on Graphics, vol. 42, no. 4. Association for Computing Machinery, 2023.

J. Condor, M. Piovarci, B. Bickel, and P. Didyk, “Gloss-aware color correction for 3D printing,” in SIGGRAPH ’23 Conference Proceedings, Los Angeles, CA, United States, 2023.

M. Piovarci, A. Chapiro, and B. Bickel, “Skin-Screen: A computational fabrication framework for color tattoos,” Transactions on Graphics, vol. 42, no. 4. Association for Computing Machinery, 2023.

C. Hafner, “Inverse shape design with parametric representations: Kirchhoff Rods and parametric surface models,” Institute of Science and Technology Austria, 2023.

C. Hafner and B. Bickel, “The design space of Kirchhoff rods,” ACM Transactions on Graphics, vol. 42, no. 5. Association for Computing Machinery, 2023.

B. Chen et al., “Gloss management for consistent reproduction of real and virtual objects,” in SIGGRAPH Asia 2022 Conference Papers, Daegu, South Korea, 2022, vol. 2022.

M. Piovarci et al., “Closed-loop control of direct ink writing via reinforcement learning,” ACM Transactions on Graphics, vol. 41, no. 4. Association for Computing Machinery, 2022.

Z. Liu et al., “Worst-case rigidity analysis and optimization for assemblies with mechanical joints,” Computer Graphics Forum, vol. 41, no. 2. Wiley, pp. 507–519, 2022.

R. Chen, Z. Wang, P. Song, and B. Bickel, “Computational design of high-level interlocking puzzles,” ACM Transactions on Graphics, vol. 41, no. 4. Association for Computing Machinery, 2022.

T. Alderighi, L. Malomo, T. Auzinger, B. Bickel, P. Cignoni, and N. Pietroni, “State of the art in computational mould design,” Computer Graphics Forum, vol. 41, no. 6. Wiley, pp. 435–452, 2022.

P. Rao et al., “VoRF: Volumetric Relightable Faces,” in 33rd British Machine Vision Conference, London, United Kingdom, 2022.

P. Velicky et al., “Saturated reconstruction of living brain tissue,” bioRxiv. Cold Spring Harbor Laboratory.

D. Degraen, M. Piovarci, B. Bickel, and A. Kruger, “Capturing tactile properties of real surfaces for haptic reproduction,” in 34th Annual ACM Symposium, Virtual, 2021, pp. 954–971.

O. Elek et al., “Robust and practical measurement of volume transport parameters in solid photo-polymer materials for 3D printing,” Optics Express, vol. 29, no. 5. The Optical Society, pp. 7568–7588, 2021.

R. Zhang, T. Auzinger, and B. Bickel, “Computational design of planar multistable compliant structures,” ACM Transactions on Graphics, vol. 40, no. 5. Association for Computing Machinery, 2021.

X. Feng et al., “Computational design of skinned Quad-Robots,” IEEE Transactions on Visualization and Computer Graphics, vol. 27, no. 6. IEEE, 2021.

B. R. Mallikarjun et al., “PhotoApp: Photorealistic appearance editing of head portraits,” ACM Transactions on Graphics, vol. 40, no. 4. Association for Computing Machinery, 2021.

A. Serrano et al., “The effect of shape and illumination on material perception: Model and applications,” ACM Transactions on Graphics, vol. 40, no. 4. Association for Computing Machinery, 2021.

M. B R et al., “Monocular reconstruction of neural face reflectance fields,” in Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition, Nashville, TN, United States; Virtual, 2021, pp. 4791–4800.

T. Rittig et al., “Neural acceleration of scattering-aware color 3D printing,” Computer Graphics Forum, vol. 40, no. 2. Wiley, pp. 205–219, 2021.

B. Chen et al., “The effect of geometry and illumination on appearance perception of different material categories,” Visual Computer, vol. 37, no. 12. Springer Nature, pp. 2975–2987, 2021.

T. Alderighi, L. Malomo, B. Bickel, P. Cignoni, and N. Pietroni, “Volume decomposition for two-piece rigid casting,” ACM Transactions on Graphics, vol. 40, no. 6. Association for Computing Machinery, 2021.

C. Hafner and B. Bickel, “The design space of plane elastic curves,” ACM Transactions on Graphics, vol. 40, no. 4. Association for Computing Machinery, 2021.

F. Laccone et al., “A bending-active twisted-arch plywood structure: Computational design and fabrication of the FlexMaps Pavilion,” SN Applied Sciences, vol. 2, no. 9. Springer Nature, 2020.

P. Dodier et al., “Novel software-derived workflow in extracranial–intracranial bypass surgery validated by transdural indocyanine green videoangiography,” World Neurosurgery, vol. 134, no. 2. Elsevier, pp. e892–e902, 2020.

P. Dodier et al., “Single-stage bone resection and cranioplastic reconstruction: Comparison of a novel software-derived PEEK workflow with the standard reconstructive method,” International Journal of Oral and Maxillofacial Surgery, vol. 49, no. 8. Elsevier, pp. 07-1015, 2020.

R. Zhang, “Structure-aware computational design and its application to 3D printable volume scattering, mechanism, and multistability,” Institute of Science and Technology Austria, 2020.

R. Guseinov, “Computational design of curved thin shells: From glass façades to programmable matter,” Institute of Science and Technology Austria, 2020.

K. Gavriil et al., “Computational design of cold bent glass façades,” ACM Transactions on Graphics, vol. 39, no. 6. Association for Computing Machinery, 2020.

R. Guseinov, “Supplementary data for ‘Computational design of curved thin shells: from glass façades to programmable matter.’” Institute of Science and Technology Austria, 2020.

R. Guseinov, “Supplementary data for ‘Computational design of cold bent glass façades.’” Institute of Science and Technology Austria, 2020.

R. Guseinov, C. McMahan, J. Perez Rodriguez, C. Daraio, and B. Bickel, “Programming temporal morphing of self-actuated shells,” Nature Communications, vol. 11. Springer Nature, 2020.

S. Jeschke, C. Hafner, N. Chentanez, M. Macklin, M. Müller-Fischer, and C. Wojtan, “Making procedural water waves boundary-aware,” Computer Graphics forum, vol. 39, no. 8. Wiley, pp. 47–54, 2020.

D. Sumin et al., “Geometry-aware scattering compensation for 3D printing,” ACM Transactions on Graphics, vol. 38, no. 4. ACM, 2019.

T. Alderighi, L. Malomo, D. Giorgi, B. Bickel, P. Cignoni, and N. Pietroni, “Volume-aware design of composite molds,” ACM Transactions on Graphics, vol. 38, no. 4. ACM, 2019.

F. Laccone et al., “FlexMaps Pavilion: A twisted arc made of mesostructured flat flexible panels,” in IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures; Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures, FORM and FORCE, Barcelona, Spain, 2019, pp. 509–515.

R. Guseinov, “Supplementary data for ‘Programming temporal morphing of self-actuated shells.’” Institute of Science and Technology Austria, 2019.

C. Hafner, C. Schumacher, E. Knoop, T. Auzinger, B. Bickel, and M. Bächer, “X-CAD: Optimizing CAD Models with Extended Finite Elements,” ACM Transactions on Graphics, vol. 38, no. 6. ACM, 2019.

T. Auzinger, W. Heidrich, and B. Bickel, “Computational design of nanostructural color for additive manufacturing,” ACM Transactions on Graphics, vol. 37, no. 4. ACM, 2018.

K. Nakashima, T. Auzinger, E. Iarussi, R. Zhang, T. Igarashi, and B. Bickel, “CoreCavity: Interactive shell decomposition for fabrication with two-piece rigid molds,” ACM Transaction on Graphics, vol. 37, no. 4. ACM, 2018.

P. Dodier et al., “Immediate flow disruption as a prognostic factor after flow diverter treatment long term experience with the pipeline embolization device,” World Neurosurgery, vol. 13. Elsevier, pp. e568–e578, 2018.

N. Umetani and B. Bickel, “Learning three-dimensional flow for interactive aerodynamic design,” ACM Trans. Graph., vol. 37, no. 4. ACM, 2018.

T. Alderighi, L. Malomo, D. Giorgi, N. Pietroni, B. Bickel, and P. Cignoni, “Metamolds: Computational design of silicone molds,” ACM Trans. Graph., vol. 37, no. 4. ACM, 2018.

L. Malomo et al., “FlexMaps: Computational design of flat flexible shells for shaping 3D objects,” ACM Transactions on Graphics, vol. 37, no. 6. Association for Computing Machinery (ACM), 2018.

B. Bickel, P. Cignoni, L. Malomo, and N. Pietroni, “State of the art on stylized fabrication,” Computer Graphics Forum, vol. 37, no. 6. Wiley, pp. 325–342, 2018.

M. Pozzi et al., “Efficient FEM-based simulation of soft robots modeled as kinematic chains,” presented at the ICRA: International Conference on Robotics and Automation, Brisbane, Australia, 2018.

O. Elek et al., “Scattering-aware texture reproduction for 3D printing,” ACM Transactions on Graphics, vol. 36, no. 6. ACM, 2017.

R. Zhang, T. Auzinger, D. Ceylan, W. Li, and B. Bickel, “Functionality-aware retargeting of mechanisms to 3D shapes,” presented at the SIGGRAPH: Computer Graphics and Interactive Techniques, Los Angeles, CA, United States , 2017, vol. 36, no. 4.

R. Guseinov, E. Miguel, and B. Bickel, “CurveUps: Shaping objects from flat plates with tension-actuated curvature,” presented at the SIGGRAPH: Special Interest Group on Computer Graphics and Interactive Techniques, Los Angeles, CA, United States, 2017, vol. 36, no. 4.

T. Du, A. Schulz, B. Zhu, B. Bickel, and W. Matusik, “Computational multicopter design,” presented at the SIGGRAPH Asia: Conference and Exhibition on Computer Graphics and Interactive Techniques in Asia, Macao, China, 2016, vol. 35, no. 6.

L. Malomo, N. Pietroni, B. Bickel, and P. Cignoni, “FlexMolds: Automatic design of flexible shells for molding,” presented at the SIGGRAPH Asia: Conference and Exhibition on Computer Graphics and Interactive Techniques in Asia, Macao, China, 2016, vol. 35, no. 6.

M. Bächer et al., “DefSense: computational design of customized deformable input devices,” presented at the CHI: Conference on Human Factors in Computing Systems, San Jose, California, USA, 2016, pp. 3806–3816.

E. Miguel Villalba, M. Lepoutre, and B. Bickel, “Computational design of stable planar-rod structures,” presented at the ACM SIGGRAPH, Anaheim, CA, USA, 2016, vol. 35, no. 4.

E. Miguel Villalba, D. Miraut, and M. Otaduy, “Modeling and estimation of energy-based hyperelastic objects,” Computer Graphics Forum, vol. 35, no. 2. Wiley-Blackwell, pp. 385–396, 2016.

M. Calatrava Moreno, T. Auzinger, and H. Werthner, “On the uncertainty of interdisciplinarity measurements due to incomplete bibliographic data,” Scientometrics, vol. 107, no. 1. Springer, pp. 213–232, 2016.

G. Bharaj, S. Coros, B. Thomaszewski, J. Tompkin, B. Bickel, and H. Pfister, “Computational design of walking automata,” presented at the SCA: ACM SIGGRAPH/Eurographics Symposium on Computer animation, Los Angeles, CA, United States, 2015, pp. 93–100.

A. Bermano, T. Beeler, Y. Kozlov, D. Bradley, B. Bickel, and M. Gross, “Detailed spatio-temporal reconstruction of eyelids,” presented at the SIGGRAPH: Special Interest Group on Computer Graphics and Interactive Techniques, Los Angeles, CA, United States, 2015, vol. 34, no. 4.

T. Martin, N. Umetani, and B. Bickel, “OmniAD: Data-driven omni-directional aerodynamics,” presented at the SIGGRAPH: Special Interest Group on Computer Graphics and Interactive Techniques, Los Angeles, CA, United States, 2015, vol. 34, no. 4.

C. Schumacher, B. Bickel, J. Rys, S. Marschner, C. Daraio, and M. Gross, “Microstructures to control elasticity in 3D printing,” presented at the SIGGRAPH: Special Interest Group on Computer Graphics and Interactive Techniques, Los Angeles, CA, USA, 2015, vol. 34, no. 4.

J. Pérez et al., “Design and fabrication of flexible rod meshes,” presented at the SIGGRAPH: Special Interest Group on Computer Graphics and Interactive Techniques, Los Angeles, CA, United States, 2015, vol. 34, no. 4.

O. Klehm et al., “Recent advances in facial appearance capture,” Computer Graphics Forum, vol. 34, no. 2. Wiley-Blackwell, pp. 709–733, 2015.