@article{18305,
  abstract     = {Motor circuits represent the main output of the central nervous system and produce dynamic behaviors ranging from relatively simple rhythmic activities like swimming in fish and breathing in mammals to highly sophisticated dexterous movements in humans. Despite decades of research, the development and function of motor circuits remain poorly understood. Breakthroughs in the field recently provided new tools and tractable model systems that set the stage to discover the molecular mechanisms and circuit logic underlying motor control. Here, we describe recent advances from both vertebrate (mouse, frog) and invertebrate (nematode, fruit fly) systems on cellular and molecular mechanisms that enable motor circuits to develop and function and highlight conserved and divergent mechanisms necessary for motor circuit development.},
  author       = {Kratsios, Paschalis and Zampieri, Niccolò and Carrillo, Robert and Mizumoto, Kota and Sweeney, Lora Beatrice Jaeger and Philippidou, Polyxeni},
  issn         = {1529-2401},
  journal      = {The Journal of Neuroscience},
  number       = {40},
  publisher    = {Society for Neuroscience},
  title        = {{Molecular and cellular mechanisms of motor circuit development}},
  doi          = {10.1523/JNEUROSCI.1238-24.2024},
  volume       = {44},
  year         = {2024},
}

@article{17189,
  abstract     = {Supergranules, which are solar flow features with a lateral scale of 30,000–40,000 km and a lifetime of ~24 h, form a prominent component of the Sun’s convective spectrum. However, their internal flows, which can be probed only by helioseismology, are not well understood. We analyse dopplergrams recorded by the Solar Dynamics Observatory satellite to identify and characterize ~23,000 supergranules. We find that the vertical flows peak at a depth of ~10,000 km, and remain invariant over the full range of lateral supergranular scales, contrary to numerical predictions. We also infer that, within the local seismic resolution (≳5,000 km), downflows are ~40% weaker than upflows, indicating an apparent mass-flux imbalance. This may imply that the descending flows also comprise plumes, which maintain the mass balance but are simply too small to be detected by seismic waves. These results challenge the widely used mixing-length description of solar convection.},
  author       = {Hanson, Chris S. and Das, Srijan B and Mani, Prasad and Hanasoge, Shravan and Sreenivasan, Katepalli R.},
  issn         = {2397-3366},
  journal      = {Nature Astronomy},
  pages        = {1088--1101},
  publisher    = {Springer Nature},
  title        = {{Supergranular-scale solar convection not explained by mixing-length theory}},
  doi          = {10.1038/s41550-024-02304-w},
  volume       = {8},
  year         = {2024},
}

@misc{22802,
  abstract     = {MESA inlist file for the paper "Unveiling complex magnetic field configurations in red giant stars" (10.1051/0004-6361/202450918)},
  author       = {Das, Srijan B and Einramhof, Lukas and Bugnet, Lisa},
  publisher    = {Institute of Science and Technology Austria},
  title        = {{MESA inlist file}},
  doi          = {10.5281/zenodo.12804810},
  year         = {2024},
}

@article{18480,
  abstract     = {Caloric restriction (CR) can extend the organism life- and health-span by improving glucose homeostasis. How CR affects the structure-function of pancreatic beta cells remains unknown. We used single nucleus transcriptomics to show that CR increases the expression of genes for beta cell identity, protein processing, and organelle homeostasis. Gene regulatory network analysis reveal that CR activates transcription factors important for beta cell identity and homeostasis, while imaging metabolomics demonstrates that beta cells upon CR are more energetically competent. In fact, high-resolution microscopy show that CR reduces beta cell mitophagy to increase mitochondria mass and the potential for ATP generation. However, CR beta cells have impaired adaptive proliferation in response to high fat diet feeding. Finally, we show that long-term CR delays the onset of beta cell aging hallmarks and promotes cell longevity by reducing beta cell turnover. Therefore, CR could be a feasible approach to preserve compromised beta cell structure-function during aging and diabetes.},
  author       = {Dos Santos, Cristiane and Cambraia, Amanda and Shrestha, Shristi and Cutler, Melanie and Cottam, Matthew and Perkins, Guy and Lev-Ram, Varda and Roy, Birbickram and Acree, Christopher and Kim, Keun Young and Deerinck, Thomas and Dean, Danielle and Cartailler, Jean Philippe and Macdonald, Patrick E. and Hetzer, Martin W and Ellisman, Mark and Arrojo E Drigo, Rafael},
  issn         = {2041-1723},
  journal      = {Nature Communications},
  publisher    = {Springer Nature},
  title        = {{Calorie restriction increases insulin sensitivity to promote beta cell homeostasis and longevity in mice}},
  doi          = {10.1038/s41467-024-53127-2},
  volume       = {15},
  year         = {2024},
}

@article{15316,
  abstract     = {Genomic DNA that resides in the nuclei of mammalian neurons can be as old as the organism itself. The life span of nuclear RNAs, which are critical for proper chromatin architecture and transcription regulation, has not been determined in adult tissues. In this work, we identified and characterized nuclear RNAs that do not turn over for at least 2 years in a subset of postnatally born cells in the mouse brain. These long-lived RNAs were stably retained in nuclei in a neural cell type–specific manner and were required for the maintenance of heterochromatin. Thus, the life span of neural cells may depend on both the molecular longevity of DNA for the storage of genetic information and also the extreme stability of RNA for the functional organization of chromatin.},
  author       = {Zocher, Sara and Mccloskey, Asako and Karasinsky, Anne and Schulte, Roberta and Friedrich, Ulrike and Lesche, Mathias and Rund, Nicole and Gage, Fred H. and Hetzer, Martin W and Toda, Tomohisa},
  issn         = {1095-9203},
  journal      = {Science},
  number       = {6691},
  pages        = {53--59},
  publisher    = {AAAS},
  title        = {{Lifelong persistence of nuclear RNAs in the mouse brain}},
  doi          = {10.1126/science.adf3481},
  volume       = {384},
  year         = {2024},
}

@misc{22865,
  abstract     = {Dataset for Dos Santos et al, 2024},
  author       = {Arrojo e Drigo, Rafael},
  publisher    = {Repository},
  title        = {{Calorie restriction increases insulin sensitivity to promote beta cell homeostasis and longevity}},
  doi          = {10.5281/zenodo.6491943},
  year         = {2024},
}

@article{13093,
  abstract     = {The direct, solid state, and reversible conversion between heat and electricity using thermoelectric devices finds numerous potential uses, especially around room temperature. However, the relatively high material processing cost limits their real applications. Silver selenide (Ag2Se) is one of the very few n-type thermoelectric (TE) materials for room-temperature applications. Herein, we report a room temperature, fast, and aqueous-phase synthesis approach to produce Ag2Se, which can be extended to other metal chalcogenides. These materials reach TE figures of merit (zT) of up to 0.76 at 380 K. To improve these values, bismuth sulfide (Bi2S3) particles also prepared in an aqueous solution are incorporated into the Ag2Se matrix. In this way, a series of Ag2Se/Bi2S3 composites with Bi2S3 wt % of 0.5, 1.0, and 1.5 are prepared by solution blending and hot-press sintering. The presence of Bi2S3 significantly improves the Seebeck coefficient and power factor while at the same time decreasing the thermal conductivity with no apparent drop in electrical conductivity. Thus, a maximum zT value of 0.96 is achieved in the composites with 1.0 wt % Bi2S3 at 370 K. Furthermore, a high average zT value (zTave) of 0.93 in the 300–390 K range is demonstrated.},
  author       = {Nan, Bingfei and Li, Mengyao and Zhang, Yu and Xiao, Ke and Lim, Khak Ho and Chang, Cheng and Han, Xu and Zuo, Yong and Li, Junshan and Arbiol, Jordi and Llorca, Jordi and Ibáñez, Maria and Cabot, Andreu},
  issn         = {2637-6113},
  journal      = {ACS Applied Electronic Materials},
  number       = {5},
  pages        = {2807--215},
  publisher    = {American Chemical Society},
  title        = {{Engineering of thermoelectric composites based on silver selenide in aqueous solution and ambient temperature}},
  doi          = {10.1021/acsaelm.3c00055},
  volume       = {6},
  year         = {2024},
}

@article{17124,
  abstract     = {In recent years, solution processes have gained considerable traction as a cost-effective and scalable method to produce high-performance thermoelectric materials. The process entails a series of critical steps: synthesis, purification, thermal treatments, and consolidation, each playing a pivotal role in determining performance, stability, and reproducibility. We have noticed a need for more comprehensive details for each of the described steps in most published works. Recognizing the significance of detailed synthetic protocols, we describe here the approach used to synthesize and characterize one of the highest-performing polycrystalline p-type SnSe. In particular, we report the synthesis of SnSe particles in water and the subsequent surface treatment with CdSe molecular complexes that yields CdSe-SnSe nanocomposites upon consolidation. Moreover, the surface treatment inhibits grain growth through Zenner pinning of secondary phase CdSe nanoparticles and enhances defect formation at different length scales. The enhanced complexity in the CdSe-SnSe nanocomposite microstructure with respect to SnSe promotes phonon scattering and thereby significantly reduces the thermal conductivity. Such surface engineering provides opportunities in solution processing for introducing and controlling defects, making it possible to optimize the transport properties and attain a high thermoelectric figure of merit.},
  author       = {Fiedler, Christine and Liu, Yu and Ibáñez, Maria},
  issn         = {1940-087X},
  journal      = {Journal of Visualized Experiments},
  number       = {207},
  publisher    = {MyJove Corporation},
  title        = {{Solution-processed, surface-engineered, polycrystalline CdSe-SnSe exhibiting low thermal conductivity}},
  doi          = {10.3791/66278},
  volume       = {2024},
  year         = {2024},
}

@article{14435,
  abstract     = {Low‐cost, safe, and environmental‐friendly rechargeable aqueous zinc‐ion batteries (ZIBs) are promising as next‐generation energy storage devices for wearable electronics among other applications. However, sluggish ionic transport kinetics and the unstable electrode structure during ionic insertion/extraction hampers their deployment. Herein,  we propose a new cathode material based on a layered metal chalcogenide (LMC), bismuth telluride (Bi<jats:sub>2</jats:sub>Te<jats:sub>3</jats:sub>), coated with polypyrrole (PPy). Taking advantage of the PPy coating, the Bi<jats:sub>2</jats:sub>Te<jats:sub>3</jats:sub>@PPy composite presents strong ionic absorption affinity, high oxidation resistance, and high structural stability. The ZIBs based on Bi<jats:sub>2</jats:sub>Te<jats:sub>3</jats:sub>@PPy cathodes exhibit high capacities and ultra‐long lifespans of over 5000 cycles. They also present outstanding stability even under bending. In addition,  we analyze here the reaction mechanism using in situ X‐ray diffraction, X‐ray photoelectron spectroscopy, and computational tools and demonstrate that, in the aqueous system, Zn<jats:sup>2+</jats:sup> is not inserted into the cathode as previously assumed. In contrast, proton charge storage dominates the process. Overall, this work not only shows the great potential of LMCs as ZIBs cathode materials and the advantages of PPy coating, but also clarifies the charge/discharge mechanism in rechargeable ZIBs based on LMCs.},
  author       = {Zeng, Guifang and Sun, Qing and Horta, Sharona and Wang, Shang and Lu, Xuan and Zhang, Chaoyue and Li, Jing and Li, Junshan and Ci, Lijie and Tian, Yanhong and Ibáñez, Maria and Cabot, Andreu},
  issn         = {1521-4095},
  journal      = {Advanced Materials},
  keywords     = {Mechanical Engineering, Mechanics of Materials, General Materials Science},
  number       = {1},
  publisher    = {Wiley},
  title        = {{A layered Bi2Te3@PPy cathode for aqueous zinc ion batteries: Mechanism and application in printed flexible batteries}},
  doi          = {10.1002/adma.202305128},
  volume       = {36},
  year         = {2024},
}

@article{14828,
  abstract     = {Production of hydrogen at large scale requires development of non-noble, inexpensive, and high-performing catalysts for constructing water-splitting devices. Herein, we report the synthesis of Zn-doped NiO heterostructure (ZnNiO) catalysts at room temperature via a coprecipitation method followed by drying (at 80 °C, 6 h) and calcination at an elevated temperature of 400 °C for 5 h under three distinct conditions, namely, air, N2, and vacuum. The vacuum-synthesized catalyst demonstrates a low overpotential of 88 mV at −10 mA cm–2 and a small Tafel slope of 73 mV dec–1 suggesting relatively higher charge transfer kinetics for hydrogen evolution reactions (HER) compared with the specimens synthesized under N2 or O2 atmosphere. It also demonstrates an oxygen evolution (OER) overpotential of 260 mV at 10 mA cm–2 with a low Tafel slope of 63 mV dec–1. In a full-cell water-splitting device, the vacuum-synthesized ZnNiO heterostructure demonstrates a cell voltage of 1.94 V at 50 mA cm–2 and shows remarkable stability over 24 h at a high current density of 100 mA cm–2. It is also demonstrated in this study that Zn-doping, surface, and interface engineering in transition-metal oxides play a crucial role in efficient electrocatalytic water splitting. Also, the results obtained from density functional theory (DFT + U = 0–8 eV), where U is the on-site Coulomb repulsion parameter also known as Hubbard U, based electronic structure calculations confirm that Zn doping constructively modifies the electronic structure, in both the valence band and the conduction band, and found to be suitable in tailoring the carrier’s effective masses of electrons and holes. The decrease in electron’s effective masses together with large differences between the effective masses of electrons and holes is noticed, which is found to be mainly responsible for achieving the best water-splitting performance from a 9% Zn-doped NiO sample prepared under vacuum.},
  author       = {Kiran, Gundegowda Kalligowdanadoddi and Singh, Saurabh and Mahato, Neelima and Sreekanth, Thupakula Venkata Madhukar and Dillip, Gowra Raghupathy and Yoo, Kisoo and Kim, Jonghoon},
  issn         = {2574-0962},
  journal      = {ACS Applied Energy Materials},
  keywords     = {Electrical and Electronic Engineering, Materials Chemistry, Electrochemistry, Energy Engineering and Power Technology, Chemical Engineering (miscellaneous)},
  number       = {1},
  pages        = {214--229},
  publisher    = {American Chemical Society},
  title        = {{Interface engineering modulation combined with electronic structure modification of Zn-doped NiO heterostructure for efficient water-splitting activity}},
  doi          = {10.1021/acsaem.3c02519},
  volume       = {7},
  year         = {2024},
}

@article{15114,
  abstract     = {As a key liquid organic hydrogen carrier, investigating the decomposition of formic acid (HCOOH) on the Pd (1 1 1) transition metal surface is imperative for harnessing hydrogen energy. Despite a multitude of studies, the major mechanisms and key intermediates involved in the dehydrogenation process of formic acid remain a great topic of debate due to ambiguous adsorbate interactions. In this research, we develop an advanced microkinetic model based on first-principles calculations, accounting for adsorbate–adsorbate interactions. Our study unveils a comprehensive mechanism for the Pd (1 1 1) surface, highlighting the significance of coverage effects in formic acid dehydrogenation. Our findings unequivocally demonstrate that H coverage on the Pd (1 1 1) surface renders formic acid more susceptible to decompose into H2 and CO2 through COOH intermediates. Consistent with experimental results, the selectivity of H2 in the decomposition of formic acid on the Pd (1 1 1) surface approaches 100 %. Considering the influence of H coverage, our kinetic analysis aligns perfectly with experimental values at a temperature of 373 K.},
  author       = {Yao, Zihao and Liu, Xu and Bunting, Rhys and Wang, Jianguo},
  issn         = {0009-2509},
  journal      = {Chemical Engineering Science},
  publisher    = {Elsevier},
  title        = {{Unravelling the reaction mechanism for H2 production via formic acid decomposition over Pd: Coverage-dependent microkinetic modeling}},
  doi          = {10.1016/j.ces.2024.119959},
  volume       = {291},
  year         = {2024},
}

@article{14652,
  abstract     = {In order to demonstrate the stability of newly proposed iridium-based Ir2Cr(In,Sn) and IrRhCr(In,Sn) heusler alloys, we present ab-initio analysis of these alloys by examining various properties to prove their stability. The stability of these alloys can be inferred from different cohesive and formation energies as well as positive phonon frequencies. Their electronic structure results indicate that they are semi-metals in nature. The magnetic moments are computed using the Slater-Pauling formula and exhibit a high value, with the Cr atom contributing the most in all alloys. Mulliken’s charge analysis results show that our alloys contain a range of linkages, mainly ionic and covalent ones. The ductility and mechanical stability of these alloys are confirmed by elastic constants viz. Poisson’s ratio, Pugh’s ratio, and many different types of elastic moduli.},
  author       = {Gupta, Shyam Lal and Singh, Saurabh and Kumar, Sumit and Anupam, Unknown and Thakur, Samjeet Singh and Kumar, Ashish and Panwar, Sanjay and Diwaker, D.},
  issn         = {0921-4526},
  journal      = {Physica B: Condensed Matter},
  number       = {2},
  publisher    = {Elsevier},
  title        = {{Ab-initio stability of Iridium based newly proposed full and quaternary heusler alloys}},
  doi          = {10.1016/j.physb.2023.415539},
  volume       = {674},
  year         = {2024},
}

@article{17052,
  abstract     = {Production of thermoelectric materials from solution-processed particles involves the synthesis of particles, their purification and densification into pelletized material. Chemical changes that occur during each one of these steps render them performance determining. Particularly the purification steps, bypassed in conventional solid-state synthesis, are the cause for large discrepancies among similar solution-processed materials. In present work, the investigation focuses on a water-based surfactant free solution synthesis of SnSe, a highly relevant thermoelectric material. We show and rationalize that the number of leaching steps, purification solvent, annealing, and annealing atmosphere have significant influence on the Sn : Se ratio and impurity content in the powder. Such compositional changes that are undetectable by conventional characterization techniques lead to distinct consolidated materials with different types and concentration of defects. Additionally, the profound effect on their transport properties is demonstrated. We emphasize that understanding the chemistry and identifying key chemical species and their role throughout the process is paramount for optimizing material performance. Furthermore, we aim to demonstrate the necessity of comprehensive reporting of these steps as a standard practice to ensure material reproducibility.},
  author       = {Fiedler, Christine and Calcabrini, Mariano and Liu, Yu and Ibáñez, Maria},
  issn         = {1521-3773},
  journal      = {Angewandte Chemie International Edition},
  number       = {25},
  publisher    = {Wiley},
  title        = {{Unveiling crucial chemical processing parameters influencing the performance of solution-processed inorganic thermoelectric materials}},
  doi          = {10.1002/anie.202402628},
  volume       = {63},
  year         = {2024},
}

@article{14734,
  abstract     = {Developing cost-effective and high-performance thermoelectric (TE) materials to assemble efficient TE devices presents a multitude of challenges and opportunities. Cu3SbSe4 is a promising p-type TE material based on relatively earth abundant elements. However, the challenge lies in its poor electrical conductivity. Herein, an efficient and scalable solution-based approach is developed to synthesize high-quality Cu3SbSe4 nanocrystals doped with Pb at the Sb site. After ligand displacement and annealing treatments, the dried powders are consolidated into dense pellets, and their TE properties are investigated. Pb doping effectively increases the charge carrier concentration, resulting in a significant increase in electrical conductivity, while the Seebeck coefficients remain consistently high. The calculated band structure shows that Pb doping induces band convergence, thereby increasing the effective mass. Furthermore, the large ionic radius of Pb2+ results in the generation of additional point and plane defects and interphases, dramatically enhancing phonon scattering, which significantly decreases the lattice thermal conductivity at high temperatures. Overall, a maximum figure of merit (zTmax) ≈ 0.85 at 653 K is obtained in Cu3Sb0.97Pb0.03Se4. This represents a 1.6-fold increase compared to the undoped sample and exceeds most doped Cu3SbSe4-based materials produced by solid-state, demonstrating advantages of versatility and cost-effectiveness using a solution-based technology.},
  author       = {Wan, Shanhong and Xiao, Shanshan and Li, Mingquan and Wang, Xin and Lim, Khak Ho and Hong, Min and Ibáñez, Maria and Cabot, Andreu and Liu, Yu},
  issn         = {2366-9608},
  journal      = {Small Methods},
  number       = {8},
  publisher    = {Wiley},
  title        = {{Band engineering through Pb-doping of nanocrystal building blocks to enhance thermoelectric performance in Cu3SbSe4}},
  doi          = {10.1002/smtd.202301377},
  volume       = {8},
  year         = {2024},
}

@article{15314,
  abstract     = {Development of electroactive materials exhibiting high performance with superior stability is crucial in the field of supercapacitors and battery research. We report on synthesis of highly stable composite of semi-polycrystalline polyaniline and graphene (SPani-graphene) and its application in supercapacitor electrodes. The electrochemical behavior and device performance of the electrodes were investigated through cyclic voltammetry (CV), galvanostatic charge-discharge GCD) and electrochemical impedance spectroscopy (EIS) in a 3-electrode and a 2-electrode (device) cell configurations, repectively. The cell specific capacitance (Cell Csp) achieved from the 2-electrode symmetric cell configuration was 525.5 F g−1 at 0.1 A g−1 using polymer gel electrolyte (PGE). The PGE in this work is xanthan gum jellied in 1 M aq. Na2SO4. The maximum energy density and power density achieved from the device was 46.7 Wh kg−1 and 16.16 kW kg−1, respectively, at 0.4 A g−1. Furthermore, the device exhibits an excellent retention of cell specific capacitance and coulombic efficiency of 97 % and 94 %, respectively, over 10,000 continuous GCD cycles, indicating an excellent rate capability as well as a promising power management. To investigate the material's electrochemical durability, a detailed EIS study has been carried out using both, 3-electrode, and 2-electrode cell configurations, before and after long cycling test (over 10,000 continuous GCD cycles). Our thorough experimentation delivers satisfactory results and has been explained in detail in the manuscript. Hereby, we propose that the EIS technique can be adopted for investigating materials' electrochemical stability, in addition to long CV and GCD cycles in the field of supercapacitors and battery research.},
  author       = {Mahato, Neelima and Singh, Saurabh and Sreekanth, T. V.M. and Yoo, Kisoo and Kim, Jonghoon},
  issn         = {2352-152X},
  journal      = {Journal of Energy Storage},
  publisher    = {Elsevier},
  title        = {{Polycrystalline phases engineered in-situ in polyaniline-graphene composite evoluting an exceptional stability and high charge storage capacity: An EIS investigative approach to evaluate material's stability}},
  doi          = {10.1016/j.est.2024.111464},
  volume       = {88},
  year         = {2024},
}

@article{15166,
  abstract     = {Reducing defects boosts room-temperature performance of a thermoelectric device},
  author       = {Navita, Navita and Ibáñez, Maria},
  issn         = {1095-9203},
  journal      = {Science},
  number       = {6688},
  pages        = {1184},
  publisher    = {American Association for the Advancement of Science},
  title        = {{Electron highways are cooler}},
  doi          = {10.1126/science.ado4077},
  volume       = {383},
  year         = {2024},
}

@article{17412,
  abstract     = {The electroreduction of biomass-derived benzaldehyde (BZH) provides a potentially cost-effective route to produce benzyl alcohol (BA). This reaction competes with the electrochemical self-coupling of BZH to hydrobenzoin (HDB), which holds significance as a biofuel. Herein, we demonstrate the selectivity towards one or the other product strongly depends on the surface chemistry of the catalyst, specifically on its ability to adsorb hydrogen, as showcased with Cu2S electrocatalysts. We particularly analyze the effect of surface ligands, oleylamine (OAm), on the selective conversion of BZH to BA or HDB. The effect of the electrode potential, electrolyte pH, and temperature are studied. Results indicate that bare Cu2S exhibits higher selectivity towards BA, while OAm-capped Cu2S promotes HDB formation. This difference is explained by the competing adsorption of protons and BZH. During the BZH electrochemical conversion, electrons first transfer to the C in the C[double bond, length as m-dash]O group to form a ketyl radical. Then the radical either couples with surrounding H+ to form BA or self-couple to produce HDB, depending on the H+ availability that is affected by the electrocatalyst surface properties. The presence of OAm inhibits the H adsorption on the electrode surface therefore reducing the formation of high-energy state Had and its combination with ketyl radicals to form BA. Instead, the presence of OAm promotes the outer sphere reaction for obtaining HDB.},
  author       = {Gong, Li and Zhao, Shiling and Yu, Jing and Li, Junshan and Arbiol, Jordi and Kallio, Tanja and Calcabrini, Mariano and Martínez-Alanis, Paulina R. and Ibáñez, Maria and Cabot, Andreu},
  issn         = {2753-1457},
  journal      = {Energy Advances},
  number       = {9},
  pages        = {2287--2294},
  publisher    = {Royal Society of Chemistry},
  title        = {{Influence of the catalyst surface chemistry on the electrochemical self-coupling of biomass-derived benzaldehyde into hydrobenzoin}},
  doi          = {10.1039/d4ya00334a},
  volume       = {3},
  year         = {2024},
}

@article{17897,
  abstract     = {High-entropy materials (HEMs) offer a quasi-continuous spectrum of active sites and have generated great expectations in fields such as electrocatalysis and energy storage. Despite their potential, the complex composition and associated surface phenomena of HEMs pose challenges to their rational design and development. In this context, we have synthesized FeCoNiPdWP high entropy phosphide (HEP) nanoparticles using a low-temperature colloidal method, and explored their application as bifunctional electrocatalysts for the oxygen evolution and reduction reactions (OER/ORR). Our analysis provides a detailed understanding of the individual roles and transformations of each element during OER/ORR operation. Notably, the HEPs exhibit an exceptionally low OER overpotential of 227 mV at 10 mA cm−2, attributed to the reconstructed HEP surface into a FeCoNiPdW high entropy oxyhydroxide with high oxidation states of Fe, Co, and Ni serving as the active sites. Additionally, Pd and W play crucial roles in modulating the electronic structure to optimize the adsorption energy of oxygen intermediates. For the ORR, Pd emerges as the most active component. In the reconstructed catalyst, the strong d–d orbital coupling of especially Pd, Co, and W fine-tunes ORR electron transfer pathways, delivering an ORR half-wave potential of 0.81 V with a pure four-electron reduction mechanism. The practicality of these HEPs catalysts is showcased through the assembly of aqueous zinc–air batteries. These batteries demonstrate a superior specific capacity of 886 mA h gZn−1 and maintain excellent stability over more than 700 hours of continuous operation. Overall, this study not only elucidates the role of each element in HEMs but also establishes a foundational framework for the design and development of next-generation bifunctional oxygen catalysts, broadening the potential applications of these complex materials in advanced energy systems.},
  author       = {He, Ren and Wang, Shiqi and Yang, Linlin and Horta, Sharona and Ding, Yang and Di, Chong and Zhang, Xuesong and Xu, Ying and Ibáñez, Maria and Zhou, Yingtang and Mebs, Stefan and Dau, Holger and Hausmann, Jan Niklas and Huo, Wenyi and Menezes, Prashanth W. and Cabot, Andreu},
  issn         = {1754-5706},
  journal      = {Energy and Environmental Science},
  number       = {19},
  pages        = {7193--7208},
  publisher    = {Royal Society of Chemistry},
  title        = {{Active site switching on high entropy phosphides as bifunctional oxygen electrocatalysts for rechargeable/robust Zn-air battery}},
  doi          = {10.1039/d4ee01912a},
  volume       = {17},
  year         = {2024},
}

@article{17125,
  abstract     = {We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies.},
  author       = {Bassani, Carlos L. and Van Anders, Greg and Banin, Uri and Baranov, Dmitry and Chen, Qian and Dijkstra, Marjolein and Dimitriyev, Michael S. and Efrati, Efi and Faraudo, Jordi and Gang, Oleg and Gaston, Nicola and Golestanian, Ramin and Guerrero-Garcia, G. Ivan and Gruenwald, Michael and Haji-Akbari, Amir and Ibáñez, Maria and Karg, Matthias and Kraus, Tobias and Lee, Byeongdu and Van Lehn, Reid C. and Macfarlane, Robert J. and Mognetti, Bortolo M. and Nikoubashman, Arash and Osat, Saeed and Prezhdo, Oleg V. and Rotskoff, Grant M. and Saiz, Leonor and Shi, An Chang and Skrabalak, Sara and Smalyukh, Ivan I. and Tagliazucchi, Mario and Talapin, Dmitri V. and Tkachenko, Alexei V. and Tretiak, Sergei and Vaknin, David and Widmer-Cooper, Asaph and Wong, Gerard C.L. and Ye, Xingchen and Zhou, Shan and Rabani, Eran and Engel, Michael and Travesset, Alex},
  issn         = {1936-086X},
  journal      = {ACS Nano},
  number       = {23},
  pages        = {14791--14840},
  publisher    = {American Chemical Society},
  title        = {{Nanocrystal assemblies: Current advances and open problems}},
  doi          = {10.1021/acsnano.3c10201},
  volume       = {18},
  year         = {2024},
}

@article{17896,
  abstract     = {Broadband photodetectors that can decipher the wavelength (λ) and intensity (I) of an unknown incident light are urgently demanded. Photothermoelectric (PTE) detectors can achieve ultrabroadband photodetection surpassing the bandgap limitation; however, their practical application is severely hampered by the lack of deciphering strategy. In this work, we report a variable elimination method to decipher λ and I of the incident lights based on an integrated Ag2Se film-based PTE detector. Nanostructured Ag2Se films with controlled thickness are synthesized using an ion sputtering of Ag and a room-temperature selenization method and then assembled into a detector. Under identical illumination, Ag2Se films of different thicknesses produce varying output photothermal voltages, influenced by factors including λ. By establishing a direct relationship between the photothermal voltage and the absorption of Ag2Se films of varied thickness, we successfully eliminate variables independent of λ, thus determining λ. Subsequently, I is determined by the calibrated responsivity relationship using obtained λ. Our PTE detector achieves a broadband spectrum from 400 to 950 nm and high accuracy, with deviations as low as ∼2.63 and ∼0.53% for deciphered λ and I, respectively. This method allows for self-powered broadband decipherable photodetection without a complex device architecture or computational assistance, which could boost the research enthusiasm and promote the commercialization of PTE broadband detectors.},
  author       = {Zhou, Jiamin and Xu, Shengduo and Shuai, Yi and Sun, Qiang and Ma, Huangshui and Wang, Chao and Wu, Haijuan and Tan, Shanshan and Wang, Zegao and Yang, Lei},
  issn         = {1944-8252},
  journal      = {ACS Applied Materials and Interfaces},
  number       = {36},
  pages        = {47923--47930},
  publisher    = {American Chemical Society},
  title        = {{Decipher the wavelength and intensity using photothermoelectric detectors}},
  doi          = {10.1021/acsami.4c10489},
  volume       = {16},
  year         = {2024},
}