@inproceedings{9969,
  abstract     = {Payment channel networks are a promising approach to improve the scalability of cryptocurrencies: they allow to perform transactions in a peer-to-peer fashion, along multihop routes in the network, without requiring consensus on the blockchain. However, during the discovery of cost-efficient routes for the transaction, critical information may be revealed about the transacting entities. This paper initiates the study of privacy-preserving route discovery mechanisms for payment channel networks. In particular, we present LightPIR, an approach which allows a client to learn the shortest (or cheapest in terms of fees) path between two nodes without revealing any information about the endpoints of the transaction to the servers. The two main observations which allow for an efficient solution in LightPIR are that: (1) surprisingly, hub labelling algorithms – which were developed to preprocess “street network like” graphs so one can later efficiently compute shortest paths – also perform well for the graphs underlying payment channel networks, and that (2) hub labelling algorithms can be conveniently combined with private information retrieval. LightPIR relies on a simple hub labeling heuristic on top of existing hub labeling algorithms which leverages the specific topological features of cryptocurrency networks to further minimize storage and bandwidth overheads. In a case study considering the Lightning network, we show that our approach is an order of magnitude more efficient compared to a privacy-preserving baseline based on using private information retrieval on a database that stores all pairs shortest paths.},
  author       = {Pietrzak, Krzysztof Z and Salem, Iosif and Schmid, Stefan and Yeo, Michelle X},
  isbn         = {978-1-6654-4501-6},
  issn         = {1861-2288},
  location     = {Espoo and Helsinki, Finland},
  publisher    = {IEEE},
  title        = {{LightPIR: Privacy-preserving route discovery for payment channel networks}},
  doi          = {10.23919/IFIPNetworking52078.2021.9472205},
  year         = {2021},
}

@article{9973,
  abstract     = {In this article we introduce a complete gradient estimate for symmetric quantum Markov semigroups on von Neumann algebras equipped with a normal faithful tracial state, which implies semi-convexity of the entropy with respect to the recently introduced noncommutative 2-Wasserstein distance. We show that this complete gradient estimate is stable under tensor products and free products and establish its validity for a number of examples. As an application we prove a complete modified logarithmic Sobolev inequality with optimal constant for Poisson-type semigroups on free group factors.},
  author       = {Wirth, Melchior and Zhang, Haonan},
  issn         = {1432-0916},
  journal      = {Communications in Mathematical Physics},
  keywords     = {Mathematical Physics, Statistical and Nonlinear Physics},
  pages        = {761–791},
  publisher    = {Springer Nature},
  title        = {{Complete gradient estimates of quantum Markov semigroups}},
  doi          = {10.1007/s00220-021-04199-4},
  volume       = {387},
  year         = {2021},
}

@unpublished{9978,
  abstract     = {Redox mediators could catalyse otherwise slow and energy-inefficient cycling of Li-S and Li-O 2 batteries by shuttling electrons/holes between the electrode and the solid insulating storage materials. For mediators to work efficiently they need to oxidize the solid with fast kinetics yet the lowest possible overpotential. Here, we found that when the redox potentials of mediators are tuned via, e.g., Li + concentration in the electrolyte, they exhibit distinct threshold potentials, where the kinetics accelerate several-fold within a range as small as 10 mV. This phenomenon is independent of types of mediators and electrolyte. The acceleration originates from the overpotentials required to activate fast Li + /e – extraction and the following chemical step at specific abundant surface facets. Efficient redox catalysis at insulating solids requires therefore carefully considering the surface conditions of the storage materials and electrolyte-dependent redox potentials, which may be tuned by salt concentrations or solvents.},
  author       = {Cao, Deqing and Shen, Xiaoxiao and Wang, Aiping and Yu, Fengjiao and Wu, Yuping and Shi, Siqi and Freunberger, Stefan Alexander and Chen, Yuhui},
  booktitle    = {Research Square},
  issn         = {2693-5015},
  keywords     = {Catalysis, Energy engineering, Materials theory and modeling},
  pages        = {21},
  publisher    = {Research Square},
  title        = {{Sharp kinetic acceleration potentials during mediated redox catalysis of insulators}},
  doi          = {10.21203/rs.3.rs-750965/v1},
  year         = {2021},
}

@unpublished{9980,
  abstract     = {Insufficient understanding of the mechanism that reversibly converts sulphur into lithium sulphide (Li2S) via soluble polysulphides (PS) hampers the realization of high performance lithium-sulphur cells. Typically Li2S formation is explained by direct electroreduction of a PS to Li2S; however, this is not consistent with the size of the insulating Li2S deposits. Here, we use in situ small and wide angle X-ray scattering (SAXS/WAXS) to track the growth and dissolution of crystalline and amorphous deposits from atomic to sub-micron scales during charge and discharge. Stochastic modelling based on the SAXS data allows quantification of the chemical phase evolution during discharge and charge. We show that Li2S deposits predominantly via disproportionation of transient, solid Li2S2 to form primary Li2S crystallites and solid Li2S4 particles. We further demonstrate that this process happens in reverse during charge. These findings show that the discharge capacity and rate capability in Li-S battery cathodes are therefore limited by mass transport through the increasingly tortuous network of Li2S / Li2S4 / carbon pores rather than electron transport through a passivating surface film.},
  author       = {Prehal, Christian and Talian, Sara Drvarič and Vizintin, Alen and Amenitsch, Heinz and Dominko, Robert and Freunberger, Stefan Alexander and Wood, Vanessa},
  booktitle    = {Research Square},
  keywords     = {Li2S, Lithium Sulphur Batteries, SAXS, WAXS},
  pages        = {21},
  title        = {{Mechanism of Li2S formation and dissolution in Lithium-Sulphur batteries}},
  doi          = {10.21203/rs.3.rs-818607/v1},
  year         = {2021},
}

@article{9981,
  abstract     = {The numerical simulation of dynamical phenomena in interacting quantum systems is a notoriously hard problem. Although a number of promising numerical methods exist, they often have limited applicability due to the growth of entanglement or the presence of the so-called sign problem. In this work, we develop an importance sampling scheme for the simulation of quantum spin dynamics, building on a recent approach mapping quantum spin systems to classical stochastic processes. The importance sampling scheme is based on identifying the classical trajectory that yields the largest contribution to a given quantum observable. An exact transformation is then carried out to preferentially sample trajectories that are close to the dominant one. We demonstrate that this approach is capable of reducing the temporal growth of fluctuations in the stochastic quantities, thus extending the range of accessible times and system sizes compared to direct sampling. We discuss advantages and limitations of the proposed approach, outlining directions
for further developments.},
  author       = {De Nicola, Stefano},
  issn         = {2666-9366},
  journal      = {SciPost Physics},
  keywords     = {General Physics and Astronomy},
  number       = {3},
  publisher    = {SciPost Foundation},
  title        = {{Importance sampling scheme for the stochastic simulation of quantum spin dynamics}},
  doi          = {10.21468/scipostphys.11.3.048},
  volume       = {11},
  year         = {2021},
}

@article{9985,
  abstract     = {AMPA receptor (AMPAR) abundance and positioning at excitatory synapses regulates the strength of transmission. Changes in AMPAR localisation can enact synaptic plasticity, allowing long-term information storage, and is therefore tightly controlled. Multiple mechanisms regulating AMPAR synaptic anchoring have been described, but with limited coherence or comparison between reports, our understanding of this process is unclear. Here, combining synaptic recordings from mouse hippocampal slices and super-resolution imaging in dissociated cultures, we compare the contributions of three AMPAR interaction domains controlling transmission at hippocampal CA1 synapses. We show that the AMPAR C-termini play only a modulatory role, whereas the extracellular N-terminal domain (NTD) and PDZ interactions of the auxiliary subunit TARP γ8 are both crucial, and each is sufficient to maintain transmission. Our data support a model in which γ8 accumulates AMPARs at the postsynaptic density, where the NTD further tunes their positioning. This interplay between cytosolic (TARP γ8) and synaptic cleft (NTD) interactions provides versatility to regulate synaptic transmission and plasticity.},
  author       = {Watson, Jake and Pinggera, Alexandra and Ho, Hinze and Greger, Ingo H.},
  issn         = {2041-1723},
  journal      = {Nature Communications},
  number       = {1},
  publisher    = {Nature Publishing Group},
  title        = {{AMPA receptor anchoring at CA1 synapses is determined by N-terminal domain and TARP γ8 interactions}},
  doi          = {10.1038/s41467-021-25281-4},
  volume       = {12},
  year         = {2021},
}

@article{9986,
  abstract     = {Size control is a fundamental question in biology, showing incremental complexity in plants, whose cells possess a rigid cell wall. The phytohormone auxin is a vital growth regulator with central importance for differential growth control. Our results indicate that auxin-reliant growth programs affect the molecular complexity of xyloglucans, the major type of cell wall hemicellulose in eudicots. Auxin-dependent induction and repression of growth coincide with reduced and enhanced molecular complexity of xyloglucans, respectively. In agreement with a proposed function in growth control, genetic interference with xyloglucan side decorations distinctly modulates auxin-dependent differential growth rates. Our work proposes that auxin-dependent growth programs have a spatially defined effect on xyloglucan’s molecular structure, which in turn affects cell wall mechanics and specifies differential, gravitropic hypocotyl growth.},
  author       = {Velasquez, Silvia Melina and Guo, Xiaoyuan and Gallemi, Marçal and Aryal, Bibek and Venhuizen, Peter and Barbez, Elke and Dünser, Kai Alexander and Darino, Martin and Pӗnčík, Aleš and Novák, Ondřej and Kalyna, Maria and Mouille, Gregory and Benková, Eva and Bhalerao, Rishikesh P. and Mravec, Jozef and Kleine-Vehn, Jürgen},
  issn         = {1422-0067},
  journal      = {International Journal of Molecular Sciences},
  keywords     = {auxin, growth, cell wall, xyloglucans, hypocotyls, gravitropism},
  number       = {17},
  publisher    = {MDPI},
  title        = {{Xyloglucan remodeling defines auxin-dependent differential tissue expansion in plants}},
  doi          = {10.3390/ijms22179222},
  volume       = {22},
  year         = {2021},
}

@inproceedings{9987,
  abstract     = {Stateless model checking (SMC) is one of the standard approaches to the verification of concurrent programs. As scheduling non-determinism creates exponentially large spaces of thread interleavings, SMC attempts to partition this space into equivalence classes and explore only a few representatives from each class. The efficiency of this approach depends on two factors: (a) the coarseness of the partitioning, and (b) the time to generate representatives in each class. For this reason, the search for coarse partitionings that are efficiently explorable is an active research challenge. In this work we present   RVF-SMC , a new SMC algorithm that uses a novel reads-value-from (RVF) partitioning. Intuitively, two interleavings are deemed equivalent if they agree on the value obtained in each read event, and read events induce consistent causal orderings between them. The RVF partitioning is provably coarser than recent approaches based on Mazurkiewicz and “reads-from” partitionings. Our experimental evaluation reveals that RVF is quite often a very effective equivalence, as the underlying partitioning is exponentially coarser than other approaches. Moreover,   RVF-SMC  generates representatives very efficiently, as the reduction in the partitioning is often met with significant speed-ups in the model checking task.},
  author       = {Agarwal, Pratyush and Chatterjee, Krishnendu and Pathak, Shreya and Pavlogiannis, Andreas and Toman, Viktor},
  booktitle    = {33rd International Conference on Computer-Aided Verification },
  isbn         = {978-3-030-81684-1},
  issn         = {1611-3349},
  location     = {Virtual},
  pages        = {341--366},
  publisher    = {Springer Nature},
  title        = {{Stateless model checking under a reads-value-from equivalence}},
  doi          = {10.1007/978-3-030-81685-8_16},
  volume       = {12759 },
  year         = {2021},
}

@article{9998,
  abstract     = {We define quantum equivariant K-theory of Nakajima quiver varieties. We discuss type A in detail as well as its connections with quantum XXZ spin chains and trigonometric Ruijsenaars-Schneider models. Finally we study a limit which produces a K-theoretic version of results of Givental and Kim, connecting quantum geometry of flag varieties and Toda lattice.},
  author       = {Koroteev, Peter and Pushkar, Petr and Smirnov, Andrey V. and Zeitlin, Anton M.},
  issn         = {1420-9020},
  journal      = {Selecta Mathematica},
  number       = {5},
  publisher    = {Springer Nature},
  title        = {{Quantum K-theory of quiver varieties and many-body systems}},
  doi          = {10.1007/s00029-021-00698-3},
  volume       = {27},
  year         = {2021},
}

@article{9999,
  abstract     = {The developmental strategies used by progenitor cells to endure a safe journey from their induction place towards the site of terminal differentiation are still poorly understood. Here we uncovered a progenitor cell allocation mechanism that stems from an incomplete process of epithelial delamination that allows progenitors to coordinate their movement with adjacent extra-embryonic tissues. Progenitors of the zebrafish laterality organ originate from the surface epithelial enveloping layer by an apical constriction process of cell delamination. During this process, progenitors retain long-term apical contacts that enable the epithelial layer to pull a subset of progenitors along their way towards the vegetal pole. The remaining delaminated progenitors follow apically-attached progenitors’ movement by a co-attraction mechanism, avoiding sequestration by the adjacent endoderm, ensuring their fate and collective allocation at the differentiation site. Thus, we reveal that incomplete delamination serves as a cellular platform for coordinated tissue movements during development. Impact Statement: Incomplete delamination serves as a cellular platform for coordinated tissue movements during development, guiding newly formed progenitor cell groups to the differentiation site.},
  author       = {Pulgar, Eduardo and Schwayer, Cornelia and Guerrero, Néstor and López, Loreto and Márquez, Susana and Härtel, Steffen and Soto, Rodrigo and Heisenberg, Carl Philipp and Concha, Miguel L.},
  issn         = {2050-084X},
  journal      = {eLife},
  keywords     = {cell delamination, apical constriction, dragging, mechanical forces, collective 18 locomotion, dorsal forerunner cells, zebrafish},
  publisher    = {eLife Sciences Publications},
  title        = {{Apical contacts stemming from incomplete delamination guide progenitor cell allocation through a dragging mechanism}},
  doi          = {10.7554/eLife.66483},
  volume       = {10},
  year         = {2021},
}

@article{10327,
  abstract     = {Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor–metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS–Pb–CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS–Pb–CuxS composites, and PbS–CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m–1 K–2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320–773 K is demonstrated.},
  author       = {Li, Mengyao and Liu, Yu and Zhang, Yu and Han, Xu and Xiao, Ke and Nabahat, Mehran and Arbiol, Jordi and Llorca, Jordi and Ibáñez, Maria and Cabot, Andreu},
  issn         = {1944-8252},
  journal      = {ACS Applied Materials and Interfaces},
  keywords     = {CuxS, PbS, energy conversion, nanocomposite, nanoparticle, solution synthesis, thermoelectric},
  number       = {43},
  pages        = {51373–51382},
  publisher    = {American Chemical Society},
  title        = {{PbS–Pb–CuxS composites for thermoelectric application}},
  doi          = {10.1021/acsami.1c15609},
  volume       = {13},
  year         = {2021},
}

@article{9235,
  abstract     = {Cu2–xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2–xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2–xS layers using high throughput and cost-effective printing technologies.},
  author       = {Li, Mengyao and Liu, Yu and Zhang, Yu and Han, Xu and Zhang, Ting and Zuo, Yong and Xie, Chenyang and Xiao, Ke and Arbiol, Jordi and Llorca, Jordi and Ibáñez, Maria and Liu, Junfeng and Cabot, Andreu},
  issn         = {1936-086X},
  journal      = {ACS Nano},
  keywords     = {General Engineering, General Physics and Astronomy, General Materials Science},
  number       = {3},
  pages        = {4967–4978},
  publisher    = {American Chemical Society},
  title        = {{Effect of the annealing atmosphere on crystal phase and thermoelectric properties of copper sulfide}},
  doi          = {10.1021/acsnano.0c09866},
  volume       = {15},
  year         = {2021},
}

@article{10134,
  abstract     = {We investigate the effect of coupling between translational and internal degrees of freedom of composite quantum particles on their localization in a random potential. We show that entanglement between the two degrees of freedom weakens localization due to the upper bound imposed on the inverse participation ratio by purity of a quantum state. We perform numerical calculations for a two-particle system bound by a harmonic force in a 1D disordered lattice and a rigid rotor in a 2D disordered lattice. We illustrate that the coupling has a dramatic effect on localization properties, even with a small number of internal states participating in quantum dynamics.},
  author       = {Suzuki, Fumika and Lemeshko, Mikhail and Zurek, Wojciech H. and Krems, Roman V.},
  issn         = {1079-7114},
  journal      = {Physical Review Letters},
  keywords     = {General Physics and Astronomy},
  number       = {16},
  publisher    = {American Physical Society},
  title        = {{Anderson localization of composite particles}},
  doi          = {10.1103/physrevlett.127.160602},
  volume       = {127},
  year         = {2021},
}

@article{8997,
  abstract     = {Phenomenological relations such as Ohm’s or Fourier’s law have a venerable history in physics but are still scarce in biology. This situation restrains predictive theory. Here, we build on bacterial “growth laws,” which capture physiological feedback between translation and cell growth, to construct a minimal biophysical model for the combined action of ribosome-targeting antibiotics. Our model predicts drug interactions like antagonism or synergy solely from responses to individual drugs. We provide analytical results for limiting cases, which agree well with numerical results. We systematically refine the model by including direct physical interactions of different antibiotics on the ribosome. In a limiting case, our model provides a mechanistic underpinning for recent predictions of higher-order interactions that were derived using entropy maximization. We further refine the model to include the effects of antibiotics that mimic starvation and the presence of resistance genes. We describe the impact of a starvation-mimicking antibiotic on drug interactions analytically and verify it experimentally. Our extended model suggests a change in the type of drug interaction that depends on the strength of resistance, which challenges established rescaling paradigms. We experimentally show that the presence of unregulated resistance genes can lead to altered drug interaction, which agrees with the prediction of the model. While minimal, the model is readily adaptable and opens the door to predicting interactions of second and higher-order in a broad range of biological systems.},
  author       = {Kavcic, Bor and Tkačik, Gašper and Bollenbach, Tobias},
  issn         = {1553-7358},
  journal      = {PLOS Computational Biology},
  keywords     = {Modelling and Simulation, Genetics, Molecular Biology, Antibiotics, Drug interactions},
  publisher    = {Public Library of Science},
  title        = {{Minimal biophysical model of combined antibiotic action}},
  doi          = {10.1371/journal.pcbi.1008529},
  volume       = {17},
  year         = {2021},
}

@unpublished{9082,
  abstract     = {Acquired mutations are sufficiently frequent such that the genome of a single cell offers a record of its history of cell divisions. Among more common somatic genomic alterations are loss of heterozygosity (LOH). Large LOH events are potentially detectable in single cell RNA sequencing (scRNA-seq) datasets as tracts of monoallelic expression for constitutionally heterozygous single nucleotide variants (SNVs) located among contiguous genes. We identified runs of monoallelic expression, consistent with LOH, uniquely distributed throughout the genome in single cell brain cortex transcriptomes of F1 hybrids involving different inbred mouse strains. We then phylogenetically reconstructed single cell lineages and simultaneously identified cell types by corresponding gene expression patterns. Our results are consistent with progenitor cells giving rise to multiple cortical cell types through stereotyped expansion and distinct waves of neurogenesis. Compared to engineered recording systems, LOH events accumulate throughout the genome and across the lifetime of an organism, affording tremendous capacity for encoding lineage information and increasing resolution for later cell divisions. This approach can conceivably be computationally incorporated into scRNA-seq analysis and may be useful for organisms where genetic engineering is prohibitive, such as humans.},
  author       = {Anderson, Donovan J. and Pauler, Florian and McKenna, Aaron and Shendure, Jay and Hippenmeyer, Simon and Horwitz, Marshall S.},
  booktitle    = {bioRxiv},
  title        = {{Simultaneous identification of brain cell type and lineage via single cell RNA sequencing}},
  doi          = {10.1101/2020.12.31.425016},
  year         = {2021},
}

@article{10290,
  abstract     = {A precise quantitative description of the ultrastructural characteristics underlying biological mechanisms is often key to their understanding. This is particularly true for dynamic extra- and intracellular filamentous assemblies, playing a role in cell motility, cell integrity, cytokinesis, tissue formation and maintenance. For example, genetic manipulation or modulation of actin regulatory proteins frequently manifests in changes of the morphology, dynamics, and ultrastructural architecture of actin filament-rich cell peripheral structures, such as lamellipodia or filopodia. However, the observed ultrastructural effects often remain subtle and require sufficiently large datasets for appropriate quantitative analysis. The acquisition of such large datasets has been enabled by recent advances in high-throughput cryo-electron tomography (cryo-ET) methods. This also necessitates the development of complementary approaches to maximize the extraction of relevant biological information. We have developed a computational toolbox for the semi-automatic quantification of segmented and vectorized filamentous networks from pre-processed cryo-electron tomograms, facilitating the analysis and cross-comparison of multiple experimental conditions. GUI-based components simplify the processing of data and allow users to obtain a large number of ultrastructural parameters describing filamentous assemblies. We demonstrate the feasibility of this workflow by analyzing cryo-ET data of untreated and chemically perturbed branched actin filament networks and that of parallel actin filament arrays. In principle, the computational toolbox presented here is applicable for data analysis comprising any type of filaments in regular (i.e. parallel) or random arrangement. We show that it can ease the identification of key differences between experimental groups and facilitate the in-depth analysis of ultrastructural data in a time-efficient manner.},
  author       = {Dimchev, Georgi A and Amiri, Behnam and Fäßler, Florian and Falcke, Martin and Schur, Florian KM},
  issn         = {1047-8477},
  journal      = {Journal of Structural Biology},
  keywords     = {Structural Biology},
  number       = {4},
  publisher    = {Elsevier},
  title        = {{Computational toolbox for ultrastructural quantitative analysis of filament networks in cryo-ET data}},
  doi          = {10.1016/j.jsb.2021.107808},
  volume       = {213},
  year         = {2021},
}

@article{9387,
  abstract     = {We report the complete analysis of a deterministic model of deleterious mutations and negative selection against them at two haploid loci without recombination. As long as mutation is a weaker force than selection, mutant alleles remain rare at the only stable equilibrium, and otherwise, a variety of dynamics are possible. If the mutation-free genotype is absent, generally the only stable equilibrium is the one that corresponds to fixation of the mutant allele at the locus where it is less deleterious. This result suggests that fixation of a deleterious allele that follows a click of the Muller’s ratchet is governed by natural selection, instead of random drift.},
  author       = {Khudiakova, Kseniia and Neretina, Tatiana Yu. and Kondrashov, Alexey S.},
  issn         = {0022-5193},
  journal      = {Journal of Theoretical Biology},
  keywords     = {General Biochemistry, Genetics and Molecular Biology, Modelling and Simulation, Statistics and Probability, General Immunology and Microbiology, Applied Mathematics, General Agricultural and Biological Sciences, General Medicine},
  publisher    = {Elsevier},
  title        = {{Two linked loci under mutation-selection balance and Muller’s ratchet}},
  doi          = {10.1016/j.jtbi.2021.110729},
  volume       = {524},
  year         = {2021},
}

@article{10123,
  abstract     = {Solution synthesis of particles emerged as an alternative to prepare thermoelectric materials with less demanding processing conditions than conventional solid-state synthetic methods. However, solution synthesis generally involves the presence of additional molecules or ions belonging to the precursors or added to enable solubility and/or regulate nucleation and growth. These molecules or ions can end up in the particles as surface adsorbates and interfere in the material properties. This work demonstrates that ionic adsorbates, in particular Na⁺ ions, are electrostatically adsorbed in SnSe particles synthesized in water and play a crucial role not only in directing the material nano/microstructure but also in determining the transport properties of the consolidated material. In dense pellets prepared by sintering SnSe particles, Na remains within the crystal lattice as dopant, in dislocations, precipitates, and forming grain boundary complexions. These results highlight the importance of considering all the possible unintentional impurities to establish proper structure-property relationships and control material properties in solution-processed thermoelectric materials.},
  author       = {Liu, Yu and Calcabrini, Mariano and Yu, Yuan and Genç, Aziz and Chang, Cheng and Costanzo, Tommaso and Kleinhanns, Tobias and Lee, Seungho and Llorca, Jordi and Cojocaru‐Mirédin, Oana and Ibáñez, Maria},
  issn         = {1521-4095},
  journal      = {Advanced Materials},
  keywords     = {mechanical engineering, mechanics of materials, general materials science},
  number       = {52},
  publisher    = {Wiley},
  title        = {{The importance of surface adsorbates in solution‐processed thermoelectric materials: The case of SnSe}},
  doi          = {10.1002/adma.202106858},
  volume       = {33},
  year         = {2021},
}

@inbook{9245,
  abstract     = {Tissue morphogenesis is driven by mechanical forces triggering cell movements and shape changes. Quantitatively measuring tension within tissues is of great importance for understanding the role of mechanical signals acting on the cell and tissue level during morphogenesis. Here we introduce laser ablation as a useful tool to probe tissue tension within the granulosa layer, an epithelial monolayer of somatic cells that surround the zebrafish female gamete during folliculogenesis. We describe in detail how to isolate follicles, mount samples, perform laser surgery, and analyze the data.},
  author       = {Xia, Peng and Heisenberg, Carl-Philipp J},
  booktitle    = {Germline Development in the Zebrafish},
  editor       = {Dosch, Roland},
  isbn         = {978-1-0716-0969-9},
  issn         = {1940-6029},
  keywords     = {Tissue tension, Morphogenesis, Laser ablation, Zebrafish folliculogenesis, Granulosa cells},
  pages        = {117--128},
  publisher    = {Humana Press},
  title        = {{Quantifying tissue tension in the granulosa layer after laser surgery}},
  doi          = {10.1007/978-1-0716-0970-5_10},
  volume       = {2218},
  year         = {2021},
}

@inproceedings{15280,
  author       = {Balazs, Daniel and Cimada da Silva, Jessica and Dunbar, Tyler and Ibáñez, Maria and Hanrath, Tobias},
  booktitle    = {Proceedings of the Internet NanoGe Conference on Nanocrystals},
  location     = {Virtual},
  publisher    = {Fundació de la comunitat valenciana SCITO},
  title        = {{Controlled reactive assembly of colloidal nanocrystal superlattices: Mechanism and kinetics}},
  doi          = {10.29363/nanoge.incnc.2021.050},
  year         = {2021},
}

